Kitchen Kompact Chadwood vanity base cabinet is a 12 inch wide, 30-1/2 inch high, 21 inch deep vanity base cabinet designed as a recessed panel unit for tight spaces, so it fits narrow vanity layouts while matching other Chadwood elements in a run. The cabinet is part of the Kitchen Kompact product class, which ties it directly to the Chadwood vanity series for coordinated installations across a bathroom project. The door frames use mortised and tenoned construction of solid 3/4 inch oak, creating a stable frame that resists racking when the door is opened and closed repeatedly in daily use. A flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face fills the center, giving a flat recessed look that aligns with the cabinet style while keeping the door lighter for smoother hinge action. Oak flat panel doors carry this recessed panel look across the front, so the face presents a consistent, traditional appearance on finished vanities.
This Kitchen Kompact vanity base cabinet is built at 12 inches wide, 30-1/2 inches high, and 21 inches deep, so the case size supports standard-depth vanity countertops while fitting narrow wall segments in a bathroom layout. Solid wood hanging strips located on the top and bottom of the cabinet define mounting lines, giving installers consistent solid zones to anchor the cabinet to studs or to neighboring cabinets in a run. Door frames made from solid 3/4 inch oak with mortised and tenoned construction combine with solid wood corner blocks that are glued and power nailed, forming a rigid box that stays square during shimming and fastening on the job. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the oak and veneer faces, creating a finished surface that is ready for installation in bathroom environments without further finishing steps.
The Kitchen Kompact 12 inch wide Chadwood vanity base cabinet CWV12B suits installations where a narrow base is needed to complete a vanity layout, because its 21 inch depth aligns with standard vanity depths while the 30-1/2 inch height matches typical base cabinet runs. The cabinet uses oak flat panel doors with a flat panel plywood insert featuring a rotary cut red oak veneer face, so it visually coordinates with other Kitchen Kompact Chadwood cabinets that share the same face materials and recessed panel style. Door frames constructed with mortised and tenoned solid 3/4 inch oak give the front a substantial frame, supporting the concealed, self-closing hinges that carry the door weight during repeated use. Inside the cabinet, adjustable shelves provide flexible storage, allowing the interior to adapt to traps, supply lines, or grouped items where a fixed shelf could interfere with plumbing or reduce usable space.
On this Kitchen Kompact vanity base cabinet, solid wood corner blocks that are glued and power nailed tie the cabinet corners together, which helps the case remain square as it is moved, leveled, and fastened in place, reducing alignment corrections later in the run. Solid wood hanging strips located at the top and bottom offer continuous solid backing along those lines, giving consistent screw bite so the cabinet holds firmly against wall framing or other cabinets without crushing weaker material. The 4 step finishing process of stain, sealer, sanding and catalyzed top coat produces a uniform finish across the oak frames and red oak veneer faces, which supports color consistency when multiple Chadwood cabinets are installed side by side. Concealed, self-closing hinges mounted to the oak door frames pull the oak flat panel doors fully shut at the end of travel, helping doors sit flush and maintain even gaps between units for a finished look. The three-ply flat panel plywood insert behind the rotary cut red oak veneer face adds dimensional stability to the door center, limiting movement compared to solid panels and helping doors stay flatter over time in typical bathroom conditions.
The Kitchen Kompact Chadwood vanity base cabinet measures 12 inches wide, 30-1/2 inches high, and 21 inches deep, so it aligns with standard-depth vanity tops while fitting narrow spaces.
The vanity cabinet doors use mortised and tenoned solid 3/4 inch oak frames with a flat panel plywood insert, giving strong joints and a recessed oak-veneered center panel.
The cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, providing a consistent completed finish across the oak and veneer faces.
The Kitchen Kompact Chadwood vanity base cabinet has solid wood hanging strips at the top and bottom, giving solid fastening zones for attaching to wall framing or neighboring cabinets.
The vanity cabinet uses concealed, self-closing hinges, so the hardware is hidden when closed and the door is pulled shut at the end of travel.
The Kitchen Kompact Chadwood vanity base cabinet has adjustable shelves, allowing the interior shelf position to be set around plumbing or organized storage.
The Kitchen Kompact Chadwood vanity base cabinet CWV12B combines a 12 inch width, 30-1/2 inch height, and 21 inch depth with mortised and tenoned 3/4 inch oak door frames and oak flat panel doors, giving a compact recessed panel unit that aligns with standard-depth vanity tops. Solid wood corner blocks, solid wood hanging strips, and a three-ply flat panel plywood insert with rotary cut red oak veneer face support a square, stable box and consistent door appearance in a Chadwood layout. Choosing this Kitchen Kompact 12 inch vanity cabinet lets installers extend a Chadwood run into narrow spaces while keeping materials, finish steps, and concealed, self-closing hinge details consistent across the bathroom project.
Sold In: 1 Each