Kitchen Kompact Glenwood sink front is an 18 inch wide base cabinet front at 34-1/2 inch height, so it matches standard kitchen base cabinet dimensions on typical runs. The Kitchen Kompact brand and Glenwood series identity give a consistent look when this sink front is used with other Glenwood components. The solid 3/4 inch oak, maple, or beech frame construction provides a substantial front structure, which helps the sink base resist racking when the cabinet is installed under a countertop. Each rail is kiln-dried, so the frame is built from stable stock before joinery, which supports long-term alignment of doors or false fronts attached to this piece. The rails are joined by mortise and tenon and then glued, creating a mechanical and adhesive joint that helps the frame handle daily use around a busy sink area.
The 18 inch width on this Glenwood sink front sets a clear footprint for layout in base runs, which helps plan cabinet spacing around plumbing and appliances. The 34-1/2 inch height aligns with standard base cabinet height before countertops, simplifying level runs when this unit sits between adjacent bases. Solid wood hanging strips located at the top and bottom on base cabinets create consistent fastening zones, allowing installers to fasten through dedicated members instead of through thinner material. The solid wood toe kicks at 3/4 inch thickness tie the lower front into a continuous wood element, which supports scribing and minor adjustments at the floor while still maintaining structural integrity once set.
This Kitchen Kompact 18 inch sink front fits base cabinet runs designed around an 18 inch opening for the sink location, so it works in layouts where space is tight but a full sink base is still needed. The Glenwood 18SF identity, referenced by the manufacturer part number GW18SF and SAP description GLENWOOD 18SF, aligns this piece within the Glenwood line, which matters when matching profiles and finishes with other Glenwood cabinets in the same kitchen. Solid 3/4 inch oak, maple, or beech frame construction means this front performs well in the high-use sink zone, where doors or false fronts are operated frequently. Solid wood corner blocks that are glued and power nailed connect the frame to the cabinet body, so the sink front behaves as part of a reinforced box, valuable in areas where a sink cutout and plumbing create openings in the structure. End panels with 3-ply construction, using a 1/2 inch thick engineered wood core and hardwood veneers, maintain flat cabinet sides next to dishwashers or adjacent bases, helping the run look even and aligned.
The mortise and tenon joints on the kiln-dried rails create fixed reference points at each corner of the frame, giving installers a square opening that simplifies aligning doors, fronts, or sink components. Glued mortise and tenon joints keep the face frame rigid during handling and fastening to walls or floors, reducing the chance of twist while shimming. Solid wood hanging strips at the top and bottom of base cabinets offer consistent, solid fastening locations, so mounting loads pass through thick wood rather than thinner panel material. The 3-ply end panel construction with its engineered wood core resists movement, so once the sink front base is leveled and tied between other cabinets, the sides help hold the setting. Solid wood toe kicks at 3/4 inch thick carry the front structure down to the floor, supporting the front edge as shims are placed and adjusted. Together, these elements give the Kitchen Kompact Glenwood sink front a construction layout that supports repeatable installations across multiple kitchens or on larger runs.
The Kitchen Kompact Glenwood sink front is 18 inches wide and 34-1/2 inches high, so it fits base cabinet runs built around standard counter height and an 18 inch sink opening.
The sink front frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood face that supports hinges or fronts in a busy sink area.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating stable, tight joints that help keep the frame square during installation and use.
The 3/4 inch thick solid wood toe kicks extend structure to the floor, helping the front edge handle contact in the toe space and work with shims.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing flat, stable cabinet sides that visually match the hardwood frame.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, act as primary fastening members for securing the cabinet to surrounding construction.
The Kitchen Kompact Glenwood sink front in the 18 inch width and 34-1/2 inch height format offers a defined footprint for base cabinet layouts, which simplifies planning sink locations in small or standard kitchens. Solid 3/4 inch oak, maple, or beech frame construction, kiln-dried and joined with mortise and tenon and glue, supports a rigid front that holds alignment in daily use. Solid wood corner blocks, solid wood hanging strips, and 3/4 inch solid wood toe kicks carry that structure through the cabinet body, adding strength where the sink opening and plumbing concentrate stress. The 3-ply end panels with engineered wood core and hardwood veneers keep the sides stable and visually consistent with the face frame, so runs finish cleanly. For projects specifying the Glenwood line, this GW18SF sink front ties directly into the Kitchen Kompact system and supports efficient, repeatable kitchen installations.
Sold In: 1 Each