Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact base peninsula cabinet identifies this 36 inch wide Chadwood base peninsula unit designed for kitchen layouts that need a finished cabinet at the end of a run. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak, which locks the joints mechanically and helps the doors stay square under everyday opening and closing. A flat panel plywood insert with a three-ply panel and a rotary cut red oak veneer face creates the recessed panel look while keeping the door lighter than solid stock, which matters when aligning doors and setting hinge tension. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at stress points so the case resists racking during transport and installation. Solid wood hanging strips located on the top and bottom give solid bearing for fastening the cabinet to adjacent structures, which supports a rigid peninsula connection.
The Kitchen Kompact 36 inch wide by 34-1/2 inch high by 24 inch deep Chadwood base peninsula cabinet sets standard base dimensions that coordinate with typical counter heights and depths, which simplifies layout in mixed runs. Oak flat panel doors define the door style on this unit, tying the recessed panel look directly to the Chadwood line for visual continuity across a kitchen. Concealed, self-closing hinges are used, placing the hinge hardware inside the cabinet so the exterior presents clean lines while the door is pulled shut automatically from the last few degrees, which helps doors sit closed without manual latching. The cabinet is identified by manufacturer part number CW36B-P and SAP description 2 CHADWOOD 36BP, giving installers and buyers clear references when matching this piece to drawings or order lists.
The Kitchen Kompact 36 inch Kitchen Kompact base peninsula cabinet is designed as a base peninsula cabinet in the Chadwood series, so it fits naturally at the end of a cabinet run where a finished base is required. Its 34-1/2 inch height and 24 inch depth match standard base cabinet and countertop dimensions, which helps this unit align with adjacent bases without custom shimming for height or depth. The recessed panel design comes from oak flat panel doors paired with a flat panel plywood insert using a rotary cut red oak veneer face, so the appearance stays consistent with other Chadwood components that use the same veneer character. Solid wood corner blocks that are glued and power nailed hold the case rigid at the corners, supporting a stable platform under countertop loads in peninsula configurations. Solid wood hanging strips located on the top and bottom provide solid anchoring points into framing or adjoining cabinets, helping this end cabinet tie structurally into the rest of the kitchen line.
The CW36B-P Chadwood base peninsula cabinet uses door frames built from solid 3/4 inch oak with mortised and tenoned construction, which supports precise squareness at the joints so hinges can be set with even gaps around the door. The flat panel plywood insert constructed as a three-ply panel controls panel expansion better than a solid insert, reducing seasonal movement that could affect door alignment or finish at the panel edges. A four step process of stain, sealer, sanding and catalyzed top coat is applied to the oak surfaces, building up a controlled finish system that protects the red oak veneer face while presenting a uniform appearance across doors and face frames. Concealed, self-closing hinges keep hinge arms out of sight from the front and draw the door closed at the end of its swing, which helps doors return to a closed position consistently after normal use. Adjustable shelves inside the cabinet let installers or owners set shelf spacing to match stored items, which maximizes the usable internal space of the 36 inch width and 24 inch depth without altering the fixed cabinet box.
The CW36B-P cabinet measures 36 inches wide by 34-1/2 inches high by 24 inches deep, so it aligns with standard base cabinet and countertop dimensions in most kitchen layouts.
The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak and a flat panel plywood insert, which supports strong joints and a recessed panel look.
The flat panel plywood insert has a three-ply panel with a rotary cut red oak veneer face, giving the recessed panel area a traditional red oak grain pattern that matches the Chadwood style.
The Chadwood cabinet doors use concealed, self-closing hinges, which keep the hardware out of sight from the front and pull the doors closed at the end of travel.
The cabinet uses solid wood corner blocks that are glued and power nailed, tying the corners together so the case stays square when installed in a peninsula run.
The cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, creating a finished surface that protects the oak and veneer in everyday kitchen conditions.
The CW36B-P Kitchen Kompact base peninsula cabinet pairs standard 36 inch by 34-1/2 inch by 24 inch sizing with Chadwood recessed panel styling, so it can serve as a defined end cabinet in a peninsula run. Mortised and tenoned solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips work together to support structural stability when this unit anchors the end of a cabinet line. Concealed, self-closing hinges, a three-ply flat panel plywood insert with rotary cut red oak veneer face, and a four step stain, sealer, sanding and catalyzed top coat finish connect construction details directly to appearance and day-to-day function. For projects needing a Chadwood-style base peninsula cabinet that aligns with standard base dimensions and uses these specific construction details, this CW36B-P cabinet provides a clearly defined option.
Sold In: 1 Each