Warmwood vanity sink base cabinet describes the Kitchen Kompact 36 inch wide x 30-1/2 inch high x 21 inch deep Warmwood Vanity Sink Base, Recessed Panel - WWV36SD, so installers know they are working with a standard-size vanity base for common bathroom layouts. The recessed panel style ties directly to the flat panel plywood insert, giving a clean, straight-lined face that suits simple trim and straightforward countertop edges. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a solid, interlocked frame that handles daily door operation in busy bath projects. Solid wood corner blocks are glued and power nailed, so the case joints stay tight when the cabinet is set, leveled, and fastened. Solid wood hanging strips located on the top and bottom provide substantial gripping points, helping the cabinet sit solidly against wall framing during installation.
The Kitchen Kompact 36 inch wide x 30-1/2 inch high x 21 inch deep Warmwood Vanity Sink Base, Recessed Panel - WWV36SD, gives installers fixed dimensions that line up with standard bath layouts and typical countertop sizes. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied, creating a finished Warmwood surface ready to coordinate with tops and trim without extra finishing work on site. Adjustable shelves work within that footprint so storage can be arranged around plumbing and supplies without cutting fixed shelves. Concealed, self-closing hinges arrive already matched to the maple flat panel doors, so hinge cups and overlay are factory-aligned for consistent door action once the cabinet is hung plumb.
The Kitchen Kompact 36 inch wide x 30-1/2 inch high x 21 inch deep Warmwood Vanity Sink Base, Recessed Panel - WWV36SD, fits projects calling for a 36 inch bath vanity footprint with a sink base and storage below. The mortised and tenoned construction of solid 3/4 inch maple door frames suits jobs where solid wood door frames are expected across the bath run, helping doors hold shape along multiple cabinets. The flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face supports a Warmwood appearance that matches other Kitchen Kompact Warmwood components, allowing a coordinated look between vanity and additional cabinetry. Solid wood hanging strips on the top and bottom give clear fastening zones when tying the vanity to wall framing in both new construction and remodel conditions.
Solid wood corner blocks that are glued and power nailed form reinforced corners, helping the cabinet stay square as it is set on an uneven floor and shimmed level. That squareness keeps the recessed panel doors aligned so reveals remain even after fastening. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied, giving the Warmwood finish a multi-layer build that is ready for typical bathroom use once the unit is installed, without extra finishing tasks. Adjustable shelves respond to on-site conditions by letting installers position storage around drainpipes or shutoffs instead of cutting around fixed shelving. Concealed, self-closing hinges simplify final adjustment because the hinge hardware is already matched to the maple flat panel doors, so installers can focus on hinge fine-tuning for smooth closing rather than drilling new patterns.
The Kitchen Kompact 36 inch wide x 30-1/2 inch high x 21 inch deep Warmwood Vanity Sink Base sets a predictable footprint that aligns with standard 36 inch bathroom vanity layouts and common countertop sizes.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, giving interlocked joints that support door stability under everyday opening and closing.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, providing a stable panel with a consistent Warmwood surface for finishing.
Solid wood hanging strips located on the top and bottom create defined fastening zones, helping installers anchor the cabinet securely along wall framing.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, producing a finished Warmwood surface ready for bath use once installed.
Adjustable shelves working with concealed, self-closing hinges create a cabinet interior and door action that support everyday bathroom storage and use.
The Kitchen Kompact 36 inch wide x 30-1/2 inch high x 21 inch deep Warmwood Vanity Sink Base, Recessed Panel - WWV36SD, combines mortised and tenoned solid 3/4 inch maple door frames, a three-ply flat panel with rotary cut hard maple veneer face, and solid wood corner blocks that are glued and power nailed. Solid wood hanging strips on the top and bottom add dependable fastening areas, while adjustable shelves and concealed, self-closing hinges support practical bathroom storage. For bath projects needing a 36 inch Warmwood vanity footprint with straightforward installation and consistent finish, this Kitchen Kompact cabinet offers a coordinated, job-ready base.
Sold In: 1 Each