Kitchen Kompact Glenwood vanity sink base defines this 36 inch wide vanity sink base cabinet as part of the Glenwood line, so it suits projects needing a specific matching style across a room. The 34-1/2 inch height and 21 inch depth set the working dimensions of the V36SDLT cabinet, which helps when laying out counter height and front clearance around plumbing runs. The recessed panel design establishes the front appearance of the cabinet, which matters when coordinating with other Glenwood cabinets and trim details. The product sits in the Kitchen Kompact cabinet category, so it is positioned for bathroom vanity sink base use where a consistent cabinet system is preferred. The manufacturer part number V36SDLT ties this vanity sink base to plans, takeoffs, and ordering lists, keeping field installation aligned with design documents for repeatable projects.
The solid wood hanging strips on the Glenwood V36SDLT base cabinet, placed at the top and bottom, establish consistent fastening bands, which helps align screws into framing while keeping the cabinet body supported across its height. The 3/4 inch thick solid wood toe kicks give a strong contact edge at the floor, which allows scribing and shimming so the 34-1/2 inch cabinet height aligns cleanly with adjacent runs and countertop lines. The solid wood corner blocks, both glued and power nailed, stabilize the box while it is being leveled, which reduces cabinet twist as adjustments are made for plumbing cutouts beneath the sink area.
This 36 inch wide, 34-1/2 inch high, 21 inch deep Kitchen Kompact vanity sink base fits projects that call for a Glenwood series recessed panel look, which keeps visual continuity when matching other Glenwood cabinets. The 21 inch depth sets a compact footprint, which suits bathrooms where floor space is planned precisely around clearances and fixtures. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide stable side walls, which is useful when the cabinet sits against walls that may see seasonal movement. Solid wood toe kicks at 3/4 inch thickness give the base a firm stance, which helps when aligning the cabinet with adjacent units along a run. The cabinet classed under Kitchen Kompact allows it to integrate into a broader system, which simplifies layout decisions across vanities and storage cabinets sharing the same line.
The mortise and tenon joints on each kiln-dried rail, glued for added strength, create a rigid frame on the V36SDLT, which keeps door openings square so hardware alignment holds through repeated use. Solid wood corner blocks that are both glued and power nailed lock the corners, which helps the cabinet maintain squareness when installers adjust shims under the toe kick to match uneven floors. Solid wood hanging strips at both the top and bottom of the base cabinet provide defined fastening lines, which aids in consistent screw placement along studs for predictable holding strength. The 3/4 inch solid wood toe kicks carry the cabinet weight at floor level, which supports long-term stability under countertop and sink loads. The combination of solid wood frame components and engineered core end panels balances rigidity with dimensional stability, which supports repeatable fit when multiple Glenwood V36SDLT units appear on the same project.
The Kitchen Kompact Glenwood V36SDLT vanity sink base measures 36 inches wide, 34-1/2 inches high, and 21 inches deep, which defines the footprint and counter height planning for the installation.
The V36SDLT vanity sink base uses solid 3/4 inch oak, maple, or beech frames with kiln-dried rails joined by mortise and tenon and glued, which supports a rigid face frame for stable door openings.
The Kitchen Kompact vanity sink base uses solid wood hanging strips at the top and bottom of the base cabinet, giving clear fastening areas to anchor the cabinet securely to wall framing.
The Glenwood V36SDLT cabinet end panels have 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing stable, finished sides that resist warping and support consistent appearance.
The 3/4 inch solid wood toe kicks on this vanity sink base create a strong floor contact area that supports cabinet weight and allows scribing to uneven floors for a clean finished look.
The Kitchen Kompact Glenwood vanity sink base uses solid wood corner blocks that are glued and power nailed, tying the corners together so the cabinet stays square during leveling and everyday service.
The Kitchen Kompact Glenwood vanity sink base V36SDLT combines a solid 3/4 inch hardwood frame, glued mortise and tenon rails, and solid wood toe kicks to support stable, square installation under a vanity top. Solid wood hanging strips at the top and bottom of the base cabinet provide defined fastening zones, which supports consistent mounting across multiple jobs. The 3-ply end panels with an engineered wood core and hardwood veneers give the sides stability and a finished surface that coordinates with the Glenwood recessed panel style. When a project calls for a 36 inch wide, 34-1/2 inch high, 21 inch deep vanity sink base in the Kitchen Kompact Glenwood line, this cabinet offers the structural details needed for dependable layout and installation.
Sold In: 1 Each