Kitchen Kompact Chadwood wall cabinet gives you a 12 inch wide, 36 inch high, 12 inch deep wall unit that fits standard upper cabinet layouts and helps fill narrow runs or end spaces with a consistent Chadwood look. The recessed panel design matches the Kitchen Kompact Chadwood style, so this CW12WT cabinet ties in with other Chadwood pieces on a wall without visual gaps or profile changes. The door frames use mortised and tenoned construction in solid 3/4 inch oak, which keeps the joints tight under repeated use and helps the door stay square over time. A flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face gives the door a stable center panel that resists twisting while keeping a uniform oak grain appearance. Solid wood hanging strips located on the top and bottom provide solid mounting structure, which supports the cabinet when it is loaded.
This Kitchen Kompact 12 inch wall cabinet uses solid wood hanging strips on the top and bottom, which provide full-width wood contact at both mounting zones and support a secure connection to wall framing. The solid wood corner blocks are glued and power nailed, tying the cabinet sides, top, and bottom together at the corners and helping the case stay square while it is being positioned and fastened. Door frames in solid 3/4 inch oak with mortised and tenoned joints carry hinge loads directly through solid stock, which supports repeatable alignment when the concealed, self-closing hinges operate. The flat panel plywood insert with a rotary cut red oak veneer face sits inside these frames, cooperating with the frame construction to keep the door stable as humidity shifts around typical kitchen conditions.
The Kitchen Kompact Chadwood CW12WT wall cabinet is sized at 12 inches wide, 36 inches high, and 12 inches deep, so it fits narrow wall spaces where a full-depth upper is needed but width is limited, such as beside a window or vent. In a longer run of Kitchen Kompact Chadwood cabinets, this 12 x 36 x 12 kitchen wall cabinet can finish off the line while keeping door style and height consistent with adjoining units. The recessed panel Chadwood door with flat panel plywood insert and rotary cut red oak veneer face lets this cabinet visually align with other Kitchen Kompact Chadwood pieces in the same kitchen. Adjustable shelves inside give flexibility to store glasses, spices, or small containers at a height that suits the run, linking the narrow footprint with usable interior space.
The door frames on this oak recessed panel wall cabinet are mortised and tenoned 3/4 inch solid oak, which locks the stile and rail connection together for long-term squareness and keeps hinge-side gaps more predictable. Solid wood corner blocks that are glued and power nailed connect the case parts at each corner, so the box resists twisting when the cabinet is loaded or when doors operate repeatedly along the wall. Solid wood hanging strips at the top and bottom supply stable fastening points, supporting straight alignment of multiple CW12WT units or other Kitchen Kompact cabinets in a row. The four step process of stain, sealer, sanding and catalyzed top coat is applied over the oak and veneer surfaces, providing a finished layer that helps the cabinet hold its appearance during everyday kitchen use and cleaning. Concealed, self-closing hinges on the oak flat panel doors return the door to the closed position, which helps the face line stay even across a wall of Chadwood cabinets.
The CW12WT Kitchen Kompact Chadwood wall cabinet is 12 inches wide, 36 inches high, and 12 inches deep, which suits standard upper cabinet layouts that need a narrow wall unit.
The Chadwood wall cabinet doors use mortised and tenoned solid 3/4 inch oak frames with a flat panel plywood insert, which supports door stability and consistent operation in a kitchen.
The door center uses a flat panel plywood insert made from a three-ply panel with a rotary cut red oak veneer face, providing a stable core with an oak-grain appearance.
The CW12WT wall cabinet case uses solid wood corner blocks that are glued and power nailed, which strengthen the corners and help the case stay square under load.
This Kitchen Kompact wall cabinet has solid wood hanging strips located on the top and bottom, giving continuous wood bearing surfaces for fastening to wall framing.
The Chadwood CW12WT cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, providing a completed finish over the oak and veneer surfaces.
The Kitchen Kompact 12 inch wall cabinet in the Chadwood line brings a 12 x 36 x 12 form factor together with oak framed recessed panel doors, letting you extend or finish a run where space is tight but full-height uppers are needed. Mortised and tenoned solid 3/4 inch oak door frames, a three-ply flat panel plywood insert with rotary cut red oak veneer, and solid wood corner blocks create a rigid case and door assembly that supports daily use. Solid wood hanging strips at the top and bottom and concealed, self-closing hinges on oak flat panel doors help align this cabinet cleanly with other Kitchen Kompact Chadwood units. Use the CW12WT when a narrow Chadwood wall cabinet is required to complete a layout while keeping a continuous style and finished surface.
Sold In: 1 Each