Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood sink base gives you a 36 inch wide, 32-1/2 inch high, 24 inch deep ADA compliant cabinet that is sized for sink installations where accessible height and reach are required. The recessed panel Chadwood design keeps the look consistent with the rest of the Kitchen Kompact line, so this unit can drop into a run of matching bases. Door frames built with mortised and tenoned construction in solid 3/4 inch maple create a rigid front that stays square as the cabinet is handled, set, and fastened on site. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face provides a stable center panel that holds its shape as humidity changes. Solid wood corner blocks that are glued and power nailed tie the corners together so the box resists racking when the cabinet is loaded, moved, or leveled.
The plywood drawers supplied as standard in this Kitchen Kompact Chadwood sink base are supported by a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, so the drawer motion stays smooth while resisting side load during everyday use. Solid wood hanging strips on both the top and bottom edges of the case give you predictable anchoring points when you are tying multiple bases together or fastening into wall studs, which helps keep the ADA compliant cabinet line straight. Oak flat panel doors on this Kitchen Kompact cabinet match the Chadwood style, so the exposed fronts stay consistent with other Chadwood units. Door frames in solid 3/4 inch maple with mortised and tenoned joints create a solid door assembly that hangs true on the concealed self-closing hinges.
The Kitchen Kompact CWH36RBS Chadwood sink base is identified as a CHADWOOD HANDICAP 36 RANGE/BASE/SINK in the SAP description, which ties this model directly to accessible sink and base locations where ADA compliant dimensions are needed. The 36 inch width works as a common sink base size, allowing this cabinet to drop into standard kitchen layouts between adjoining base units. At 32-1/2 inches high and 24 inches deep, the cabinet lines up with runs designed around accessible work heights while still matching typical base cabinet depth. The recessed panel door style with oak flat panel doors keeps the exterior appearance in the Chadwood family, so the unit looks correct when paired with other Kitchen Kompact Chadwood cabinets. The combination of ADA compliant sizing and standard base footprint lets this cabinet serve both accessibility requirements and normal kitchen layout practices.
The mortised and tenoned construction of the solid 3/4 inch maple door frames on this Kitchen Kompact Chadwood sink base gives each door a mechanically interlocked joint, which helps the doors stay square on the concealed self-closing hinges over years of opening and closing. The flat panel plywood insert using a three-ply panel with a rotary cut hard maple veneer face stabilizes the center panel against warping, so door reveals stay more consistent after installation. Solid wood corner blocks that are glued and power nailed tie the cabinet corners together, resisting racking as the cabinet is moved into position or as countertops load the case. Solid wood hanging strips on the top and bottom of the cabinet create repeatable structural fastening points, so installers can run fasteners through these strips and maintain cabinet alignment. The front to back epoxy-coated drawer system attached to a solid wood strip at the back supports plywood drawers along their full travel, keeping drawer action smooth while carrying typical sink-base storage loads.
The Kitchen Kompact Chadwood sink base measures 36 inches wide, 32-1/2 inches high, and 24 inches deep, so it fits common sink openings while meeting the stated ADA compliant height requirement.
The ADA compliant 32-1/2 inch cabinet height places the sink work surface lower than standard bases, which helps provide more accessible reach and working position at the countertop in applicable layouts.
The door frames are solid 3/4 inch maple built with mortised and tenoned construction, creating a strong, square frame that supports hinge mounting and helps doors stay aligned over time.
The concealed, self-closing hinges keep hardware hidden from view while pulling the oak doors closed, which gives cleaner sightlines and reduces slamming in busy kitchen and work areas.
The plywood drawers ride on a front to back epoxy-coated drawer system that is securely attached to a solid wood strip at the back, giving consistent drawer travel under typical base cabinet loads.
Solid wood hanging strips on the top and bottom edges provide defined fastening zones for securing the cabinet to wall framing, which supports stable alignment with adjoining Chadwood base units.
The Kitchen Kompact 36 inch wide CWH36RBS Chadwood sink base combines ADA compliant 32-1/2 inch cabinet height with a 24 inch depth and recessed panel Chadwood styling, so it integrates into accessible kitchen layouts while matching other Kitchen Kompact bases. Solid 3/4 inch maple door frames with mortised and tenoned construction, oak flat panel doors, and a three-ply plywood center panel support a stable front that holds alignment under normal use. Solid wood corner blocks and solid wood hanging strips at the top and bottom give the case structure you can rely on as you fasten and align runs. For projects calling for a Chadwood ADA compliant sink location that coordinates with other Kitchen Kompact units, this cabinet delivers the specified dimensions and construction.
Sold In: 1 Each