Kitchen Kompact Glenwood base peninsula corner cabinet GW48BC-P is a 48 inch wide, 34-1/2 inch high, 24 inch deep base unit that creates a peninsula corner run, so it anchors layout transitions between kitchen work areas. The cabinet uses a recessed panel Glenwood style, giving a defined frame-and-panel look that coordinates with other Kitchen Kompact pieces on the same job. As a base peninsula corner, it builds into a standard cabinet height line, so it matches typical counter heights and front reveals. The piece is classified under Kitchen Kompact cabinets, tying it directly to the brand line when planning a full room of matching units. This specific peninsula corner format allows a straight run of base cabinets to turn and project into the room, which supports island-style layouts while keeping storage located along the turn.
The Kitchen Kompact 48 inch wide, 34-1/2 inch high, 24 inch deep Glenwood base peninsula corner cabinet establishes a standard-depth base footprint, so it lines up with typical 24 inch deep base runs. The 34-1/2 inch height matches common base cabinet height before countertop, keeping work surfaces at a consistent level across adjoining cabinets. The 48 inch width allows the cabinet to span a substantial portion of the corner-to-peninsula transition, which helps carry countertop spans and storage volume through the turn. These set dimensions help installers plan clearances, appliance spacing, and overhangs around the peninsula corner in a repeatable way.
The Kitchen Kompact Glenwood base peninsula corner cabinet GW48BC-P fits base locations where a straight run turns to form a peninsula, giving a defined corner while holding a recessed panel Glenwood look across the front. In Kitchen Kompact layouts, this cabinet class ties into other Kitchen Kompact units, which supports consistent frame dimensions and visual lines from wall to peninsula. The 48 inch width and 24 inch depth support typical countertop geometry at the turn, so designers can run surfaces out into the room while maintaining standard overhangs. With end panels built on a 3-ply, 1/2 inch thick engineered wood core and hardwood veneers, the cabinet can present finished hardwood-faced sides where the peninsula is exposed to traffic. Solid wood toe kicks at 3/4 inch thickness carry the visible base around the corner, keeping the profile continuous across adjoining cabinets.
Each frame rail on this Glenwood base peninsula corner is kiln-dried, joined by mortise and tenon, and glued, so the front frame resists loosening under repeated door use, helping installations stay aligned over time. Solid wood corner blocks that are glued and power nailed tie the case together at high-stress junctions, which helps the cabinet remain square while countertops and adjoining cabinets bear on the peninsula corner. Solid wood hanging strips on wall and base cabinets are located at the top and bottom, giving installers full-length hardwood strips to fasten through, so the cabinet body anchors firmly to structures along both the wall and peninsula directions. Frames built of solid 3/4 inch oak, maple, or beech present a robust hardwood front edge, which supports hinge mounting and front hardware without relying on thin material at the corner. End panels with a 3-ply engineered wood core and hardwood veneers balance dimensional stability with a hardwood outer surface, so exposed peninsula sides maintain their appearance while the core helps limit movement.
The Kitchen Kompact Glenwood base peninsula corner GW48BC-P measures 48 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet and countertop layouts.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a thick hardwood structure that supports door hardware and helps the peninsula corner resist racking.
Each frame rail is kiln-dried, joined by mortise and tenon, and then glued, creating tight joints that help the front frame stay stable during everyday use.
The cabinet uses 3/4 inch thick solid wood toe kicks, giving a substantial base that carries vertical loads and keeps the toe area aligned along the peninsula.
The Glenwood base peninsula corner uses solid wood corner blocks that are glued and power nailed, tying the case corners together to help the cabinet remain square.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, combining a hardwood appearance with a stable core for exposed peninsula sides.
The Kitchen Kompact Glenwood base peninsula corner cabinet GW48BC-P combines a 48 inch wide, 34-1/2 inch high, 24 inch deep footprint with solid 3/4 inch hardwood frames, mortise and tenon rails, solid wood corner blocks, and 3-ply hardwood-veneered end panels, giving installers a defined Glenwood recessed panel base unit to anchor a peninsula corner in Kitchen Kompact layouts. Use these verified construction and dimension details to align this cabinet with your planned base runs, peninsula turn, and exposed end requirements, then integrate it as the structural transition piece between wall and peninsula cabinets.
Sold In: 1 Each