Warmwood vanity sink base cabinet from Kitchen Kompact provides a 36 inch wide, 30-1/2 inch high, and 21 inch deep base built for a bathroom sink layout. The recessed panel design gives you a flat panel look that pairs with the Warmwood finish. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a solid frame that holds alignment as the doors are opened and closed over time. Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, so the visible panel surface matches the maple frame. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together for a rigid box that stays square as it is handled and installed. Solid wood hanging strips located on the top and bottom give you sturdy grab points during mounting and help the cabinet support load against the wall.
Solid wood hanging strips located on both the top and bottom edges of the Kitchen Kompact vanity base give defined mounting rails across the cabinet width, which helps you fasten into framing while keeping the back supported. Solid wood corner blocks that are glued and power nailed help the box stay square as it is positioned and fastened, which simplifies lining up door reveals with adjacent cabinets. Mortised and tenoned solid 3/4 inch maple door frames hold hinge screws in solid wood, helping the doors track correctly after installation. Adjustable shelves can be set at heights that work around drain and supply lines, which lets you maintain usable storage after the sink and plumbing are in place.
The Kitchen Kompact 36 inch wide, 30-1/2 inch high, and 21 inch deep Warmwood vanity sink base lines up with common bath layouts that call for a three-foot vanity footprint. The recessed panel Warmwood design with maple flat panel doors ties into other Kitchen Kompact cabinetry in the same finish, which helps maintain a consistent look across a bathroom or adjoining spaces. Door frames built from solid 3/4 inch maple with a mortised and tenoned construction give the front of the cabinet a traditional frame-and-panel appearance suited to both residential bath remodels and new installations using framed cabinets. Flat panel plywood inserts with a rotary cut hard maple veneer face maintain a maple grain surface across the panels, helping the vanity front coordinate with other maple veneer products used nearby.
Mortised and tenoned joints in the solid 3/4 inch maple door frames provide fixed alignment between stiles and rails, which supports accurate hinge positioning and keeps the doors tracking properly as they cycle. Concealed, self-closing hinges mount to these maple frames, so the self-closing action works against a solid structure that resists loosening under repeated use. Solid wood corner blocks that are glued and power nailed brace the cabinet corners from inside, helping the box resist twisting loads during transport and while being fastened, which in turn helps keep the face frame plumb. Solid wood hanging strips at the top and bottom spread mounting loads across wide wooden rails, supporting a firm connection to wall framing and helping the vanity carry the weight of a sink and countertop. The four step finishing process of stain, sealer, sanding, and catalyzed top coat builds multiple layers on the maple veneer and maple frames, which supports a consistent appearance across edges and flat areas under normal bathroom conditions. Adjustable shelves can be moved to positions that clear traps and supply lines, which preserves interior space and keeps stored items organized under the sink.
The Kitchen Kompact Warmwood vanity sink base is 36 inches wide, 30-1/2 inches high, and 21 inches deep, so it suits bath layouts designed around a three-foot vanity footprint.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a rigid frame that holds hinges and helps doors stay aligned during long-term use.
Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, so the visible panel surface shows a maple grain that matches the solid maple frames.
The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, building layered finish coverage for an even Warmwood appearance on doors and panels.
Concealed, self-closing hinges stay hidden when the doors are shut and draw the doors closed at the end of travel, which keeps the Warmwood recessed panel front clean and consistent.
Solid wood hanging strips on the top and bottom of the cabinet provide continuous mounting rails, helping you fasten the vanity securely against wall framing.
The Kitchen Kompact 36 inch Warmwood vanity sink base with recessed panel, maple flat panel doors, and WWV36SDL construction gives you a framed cabinet sized for standard bath layouts. Solid 3/4 inch maple door frames, three-ply maple veneer panels, solid wood corner blocks, and solid wood hanging strips work together to support stable mounting and everyday door use. Adjustable shelves and concealed, self-closing hinges help the interior and door function match the Warmwood look on the exterior. For projects calling for a Warmwood vanity footprint built on framed maple construction, this sink base cabinet offers a defined size and construction package ready to be integrated into your bath plan.
Sold In: 1 Each