Kitchen Kompact base peninsula cabinet defines this Warmwood 48 inch wide, 34-1/2 inch high, 24 inch deep cabinet as a dedicated base unit for peninsula layouts, giving installers a clearly sized piece for tying together open-end kitchen runs with consistent dimensions.
The maple flat panel doors use door frames with mortised and tenoned construction of solid 3/4 inch maple, creating a rigid door assembly that helps doors stay aligned over time on active kitchen peninsulas.
A flat panel plywood insert uses a three-ply panel with a rotary cut hard maple veneer face, so the door centers present a maple visual while using a stable plywood core suited to everyday kitchen environments.
Solid wood corner blocks are glued and power nailed, reinforcing cabinet corners so the case can handle typical base cabinet loads at the peninsula without relying solely on the face frame for strength.
Solid wood hanging strips located on the top and bottom add secure mounting points to tie the cabinet into adjacent construction, helping the installer create a solid run where the peninsula meets adjoining cabinetry.
A four step process of stain, sealer, sanding and catalyzed top coat is applied, giving the Warmwood finish a complete coating system that supports visual consistency across doors, face frames, and exposed case parts.
Sold by Wurth Baer Supply in the Kitchen Kompact line, this WW48BC-P cabinet aligns with the Warmwood 48BCP description used for planning and ordering.
This Warmwood base peninsula cabinet maintains a 48 inch width, 34-1/2 inch height, and 24 inch depth, giving clear case dimensions when you are laying out countertop overhang and aligning toe space along a peninsula.
Solid wood hanging strips at the top and bottom of the case establish consistent fastening lines, which helps you tie the cabinet securely into substructure, end panels, or backer walls where the peninsula returns.
Solid wood toe kicks at 3/4 inch thick create a substantial lower front, so the toe space face can carry typical finishes while supporting normal kitchen traffic at the base of the peninsula.
Plywood drawers use a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet for stability, which helps drawer boxes track correctly when the peninsula is used as a work zone.
Adjustable shelves inside the cabinet give a way to match internal storage to the installed peninsula function, whether the base is used for general storage, serving, or prep support.
The Kitchen Kompact 48 inch Warmwood base peninsula cabinet is built as a peninsula base unit, so its 48 inch width and 24 inch depth suit runs where a counter extends out from a wall and requires a finished base cabinet at the transition.
The recessed panel Warmwood design uses maple flat panel doors with a hard maple veneer panel insert, matching kitchen layouts that call for a flat center panel with visible maple grain across doors and drawer fronts on exposed peninsula ends.
Solid wood toe kicks at 3/4 inch thick match a base cabinet role, giving the finished toe area enough structure to line up with adjacent Warmwood base cabinets while supporting the visual continuity around the base of the peninsula.
Because the cabinet is in the Kitchen Kompact product class and uses the manufacturer part WW48BC-P, it fits projects referencing the Warmwood 48BCP description in drawings or bid schedules for base peninsula positions.
Solid wood hanging strips located on the top and bottom work well in peninsula installations where the cabinet must tie into both floor and upper bracing, so the unit can help carry countertop load in open-plan kitchens.
The mortised and tenoned construction of solid 3/4 inch maple door frames means each door frame joint has defined mechanical engagement, supporting repeatable door alignment when multiple Warmwood base peninsula cabinets are set in a row.
The flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face creates uniform maple grain across panels, simplifying visual alignment when doors line up along the peninsula front or side.
Solid wood corner blocks that are glued and power nailed give the case repeatable squareness, so when you pull measurements off the cabinet for templating countertops or aligning end panels, the cabinet box geometry supports accurate layout.
The 4 step process of stain, sealer, sanding and catalyzed top coat establishes a consistent Warmwood color and sheen from cabinet to cabinet, which matters when you repeat the WW48BC-P in larger peninsula banks or mirror the finish on island runs.
The plywood drawers and the front to back epoxy-coated drawer system, securely attached to a solid wood strip in the back of the cabinet, provide a stable drawer track setup, allowing drawer clearances to stay consistent as you level and align the peninsula run.
Adjustable shelves let you set interior levels to match common stored items, so repeated installations can follow a standard shelf layout while still adjusting quickly for specific household storage needs within the same cabinet shell.
The Kitchen Kompact base peninsula cabinet measures 48 inches wide, 34-1/2 inches high, and 24 inches deep, which helps with planning countertop spans and toe space along a peninsula run.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, creating strong joints that support consistent door alignment and operation in daily kitchen use.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving a maple appearance while using a stable plywood core for cabinet doors.
Solid wood hanging strips located on the top and bottom provide defined fastening areas, which supports secure attachment to surrounding structure in a peninsula layout.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, producing a finished surface that maintains Warmwood color and sheen across visible cabinet parts.
Plywood drawers use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet, helping drawers track smoothly under load.
The Kitchen Kompact Warmwood 48 inch base peninsula cabinet, WW48BC-P, pairs a recessed panel maple door design with solid wood corner blocks and hanging strips, giving installers a clearly defined cabinet for peninsula positions in Warmwood kitchens.
With 48 inch width, 34-1/2 inch height, and 24 inch depth, plus 3/4 inch thick solid wood toe kicks and plywood drawers on an epoxy-coated drawer system, this unit fits projects that call for a Warmwood 48BCP peninsula base cabinet.
Sold In: 1 Each