Kitchen Kompact Warmwood sink base cabinet is a 60 inch wide, 34-1/2 inch high, 24 inch deep recessed panel sink base designed as part of the Kitchen Kompact cabinet line, so it anchors a double-bowl or large single-bowl sink run with consistent dimensions for layout.
The cabinet uses maple, flat panel doors with a recessed panel style, which gives a clean face while matching other Warmwood pieces for a coordinated bank of cabinets on the same wall.
Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating tight, interlocking joints that help the doors stay square on the frame during daily door swing in a busy kitchen.
Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, so the door panels present a maple veneer surface that visually ties into other maple-fronted cabinets in the same project.
The Warmwood finish uses a 4 step process of stain, sealer, sanding and catalyzed top coat, which builds a protective finish system over the maple surfaces to support long-term use in a normal kitchen environment.
Solid wood toe kicks at 3/4 inch thickness are built into the cabinet, providing a solid face at floor level that aligns with adjacent Kitchen Kompact units.
This Warmwood sink base measures 60 inches wide, 34-1/2 inches high, and 24 inches deep, so it occupies a full five-foot footprint and aligns with standard base cabinet depth in a typical kitchen plan.
The 34-1/2 inch cabinet height positions the top of the unit to work under a standard countertop thickness, helping the finished counter land at a typical working height when coordinated with other Kitchen Kompact bases.
The 24 inch depth matches standard base cabinet depth, allowing the front of the recessed panel doors to flush out with adjoining base cabinets so the sink front lines up cleanly across the run.
The solid wood toe kicks at 3/4 inch thickness extend across the front, providing a structural face at floor level that supports a continuous toe space when joined to other Warmwood bases.
The Kitchen Kompact WW60SB sink base is part of the Kitchen Kompact cabinet class, so it fits into Warmwood kitchen layouts that call for a recessed panel style and a 60 inch wide sink center.
With maple, flat panel doors, the WW60SB suits projects where a maple-faced door with a flat recessed center panel is specified across the lower run, keeping the sink area visually aligned with adjoining base cabinets.
The three-ply flat panel plywood insert with a rotary cut hard maple veneer face presents a maple surface at the center of each door, so the WW60SB performs well in kitchens designed around maple-fronted casework.
Solid wood hanging strips located on the top and bottom of the cabinet give this sink base continuous solid backing at both mounting rails, which supports stable positioning when the cabinet is fastened into a straight run under a countertop.
Solid wood corner blocks that are glued and power nailed tie the casework corners together, which is useful when the 60 inch Warmwood sink base is the main structural unit under a heavier sink and countertop assembly.
The 4 step finish process of stain, sealer, sanding and catalyzed top coat means all exposed maple and veneer faces on the WW60SB receive a complete coating system, promoting a uniform appearance from door to door once the cabinet is in service.
Door frames constructed from solid 3/4 inch maple with mortised and tenoned joints help the doors stay aligned to the face of the sink base over time, reducing adjustments caused by joint movement at the corners.
Adjustable shelves in the Warmwood sink base allow shelf height changes inside the cabinet, which matters when routing plumbing lines or placing under-sink storage at usable elevations.
The epoxy-coated front to back drawer system is securely attached to a solid wood strip in the back of the cabinet, so drawer movement is guided along a consistent path, helping drawers travel smoothly along the full cabinet depth.
Solid wood toe kicks at 3/4 inch thickness deliver a sturdy front at floor level, which helps the front of the sink area stay solid when the base is tied into adjoining cabinets for a straight, continuous line.
Being packed and sold in each unit, the WW60SB is treated as a single 60 inch Warmwood sink base in planning, letting project takeoffs assign one specific cabinet per sink location.
The WW60SB sink base measures 60 inches wide, 34-1/2 inches high, and 24 inches deep, so it fills a five-foot cabinet space and aligns with standard base cabinet depth and height.
The Warmwood sink base uses maple, flat panel doors with a recessed panel plywood insert, giving a flat center panel look that coordinates with other recessed panel Warmwood cabinets.
The WW60SB door frames use mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints that support squareness and help maintain door alignment during regular operation.
The Warmwood sink base uses a 4 step process of stain, sealer, sanding and catalyzed top coat, building a layered finish over maple and veneer surfaces for normal kitchen service.
This Kitchen Kompact sink base uses adjustable shelves, allowing the shelf positions inside the cabinet to be set at different heights around plumbing and under-sink storage.
The Warmwood 60SB uses a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, stabilizing drawer slides along the cabinet depth.
The Kitchen Kompact Warmwood sink base cabinet WW60SB pairs a 60 inch width with a 34-1/2 inch height and 24 inch depth, giving installers a defined footprint when planning a main sink center in a Warmwood kitchen.
With maple, flat panel recessed doors, three-ply maple veneer inserts, adjustable shelves, plywood drawers, and solid wood structural elements, this sink base is positioned to serve as the central cabinet in a coordinated Kitchen Kompact Warmwood layout.
Sold In: 1 Each