Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity base cabinet is a 12 inch wide, 30-1/2 inch high, and 21 inch deep vanity base cabinet that gives you a narrow, full-depth storage option where space is tight. The recessed panel Warmwood design ties projects into the Kitchen Kompact line, so matching other Warmwood cabinets in the same run stays straightforward. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which locks joints mechanically for a stable door that resists racking during daily use. Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, allowing a maple look while keeping the panel lighter and more dimensionally predictable. Solid wood corner blocks are glued and power nailed, which helps the case stay square when the cabinet is loaded and during installation.
This Kitchen Kompact WWV12B cabinet measures 12 inches wide, 30-1/2 inches high, and 21 inches deep, giving you a full-depth vanity base in a compact width suited for tight layouts or filler gaps. Solid wood hanging strips on the top and bottom of the cabinet provide two continuous mounting bands, so fasteners can be placed where studs or blocking are available while still tying solidly into the cabinet structure. The case is reinforced with solid wood corner blocks that are glued and power nailed, which keeps the box square while you level, shim, and secure it to walls or adjacent cabinets. This combination of hanging strips and corner blocks supports a predictable mounting workflow on bathroom or similar projects.
This Warmwood V12B cabinet is a vanity base cabinet sized at 12 inches wide, 30-1/2 inches high, and 21 inches deep, so it fits narrow runs where a standard depth is required but width is limited. The recessed panel maple flat panel doors with a rotary cut hard maple veneer face align visually with other Kitchen Kompact Warmwood components, which helps maintain a consistent door style along a bathroom or utility vanity wall. Mortised and tenoned solid 3/4 inch maple door frames give the face a solid, traditional frame-and-panel look that works in many residential bath layouts. Adjustable shelves inside the cabinet support flexible storage around traps, drains, or supplies, which is useful when the cabinet is used at the end of a run or near plumbing offsets. Concealed, self-closing hinges preserve a clean exterior appearance while managing the door close, keeping the compact cabinet looking orderly in tight spaces.
The door frames on this Kitchen Kompact vanity use mortised and tenoned solid 3/4 inch maple construction, which creates a mechanically interlocked joint that helps doors stay aligned through handling, hinge installation, and long-term operation. Flat panel plywood inserts made as three-ply panels with a rotary cut hard maple veneer face give a stable panel with a consistent maple grain, reducing visual variation across multiple units installed in the same room. Solid wood corner blocks that are glued and power nailed at the cabinet corners stiffen the box, which helps the cabinet maintain square alignment as it is clamped to neighbors or fastened to irregular walls. Solid wood hanging strips at both the top and bottom provide defined fastening zones, so screws can be driven into solid material along the cabinet length for a straight, rigid run. The 4 step process of stain, sealer, sanding, and catalyzed top coat delivers a ready-to-install Warmwood finish that avoids extra shop finishing steps, supporting a predictable project schedule.
The WWV12B Warmwood vanity base cabinet is 12 inches wide, 30-1/2 inches high, and 21 inches deep, so it provides a standard-depth cabinet in a compact width for tight bathroom layouts.
The vanity door frames use mortised and tenoned solid 3/4 inch maple, giving the door strong joints that handle hinge loads and frequent opening in everyday use.
The cabinet box uses solid wood corner blocks that are glued and power nailed, which stiffens the case and helps it stay square during installation and service.
The recessed doors use flat panel plywood inserts made from a three-ply panel with a rotary cut hard maple veneer face, giving a maple appearance with stable panel construction.
Solid wood hanging strips at the top and bottom provide continuous fastening areas, so the cabinet can be firmly secured along its length to wall framing or adjacent units.
The Warmwood vanity cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a completed surface ready for installation on site.
This Kitchen Kompact Warmwood vanity base cabinet combines a 12 inch wide, 30-1/2 inch high, 21 inch deep footprint with mortised and tenoned solid 3/4 inch maple doors, three-ply maple veneer panels, and solid wood corner blocks and hanging strips. That construction package gives you a narrow, standard-depth vanity cabinet with concealed, self-closing hinges, adjustable shelves, and a Warmwood finish built through a 4 step stain, sealer, sanding, and catalyzed top coat process. Use this WWV12B unit whenever you need a compact, recessed panel Warmwood cabinet that aligns with the Kitchen Kompact line and supports straightforward, repeatable installation work.
Sold In: 1 Each