Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact warmwood vanity base cabinet describes a 12 inch wide, 34-1/2 inch high, 21 inch deep base unit built for bathroom vanity runs where a narrow cabinet is required. The solid 3/4 inch wood frame gives the cabinet structural strength, supporting countertop loads and daily drawer and door use. The recessed panel style defines the door and drawer front look, matching projects built around this specific Kitchen Kompact design. The warmwood finish tone aligns with the WARMWOOD V12BT description, helping projects stay consistent across a bathroom suite. The 21 inch depth matches standard vanity layouts, keeping fronts aligned with adjacent cabinets and typical top depths. The overall height of 34-1/2 inches sets the cabinet up for standard vanity top heights once a top is installed, helping runs sit level from cabinet to cabinet.
The 12 inch width of this vanity base cabinet lets it fit narrow spaces in a vanity layout, filling small gaps while maintaining usable storage. The 21 inch depth coordinates with standard vanity top depths, so the front frame aligns cleanly with countertops and adjacent cabinets. The 34-1/2 inch height sets the cabinet box for typical bathroom vanity ergonomics once a top is installed, keeping working height consistent along the run. The solid 3/4 inch frame stock acts as a strong anchoring surface for hinges and door hardware, so repeated opening and closing remains stable. The combination of frame thickness and end panel construction supports level installation across shims and uneven floors.
The Kitchen Kompact 12 inch warmwood vanity base cabinet fits into bathroom layouts that need a narrow base unit to complete a run. Its recessed panel design works in projects using matching Kitchen Kompact warmwood fronts for a consistent appearance across multiple cabinets. The solid 3/4 inch oak, maple or beech frame at the front lets the cabinet carry the weight of a vanity top, so the unit can be used as part of a supporting line under the countertop. The 3/4 inch solid wood toe kicks support the load at floor level, which matters when the cabinet sits on subfloors that concentrate weight along the front edge. Solid wood hanging strips located at the top and bottom of the base cabinet create defined fastening areas for securing the cabinet to wall framing, helping the unit resist pulling away under countertop or plumbing loads. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers hold fasteners along the sides, so the cabinet can be ganged to neighboring units to build out a full vanity. These end panels also provide a stable surface for exposed ends in designs where one side of the cabinet is visible.
The solid 3/4 inch frame made from oak, maple or beech gives a uniform front thickness, so installers can align neighboring cabinets without dealing with inconsistent frame sizes. Each kiln-dried rail joined with mortise and tenon and glued creates tight corners in the face frame, which keeps door openings square and simplifies hinge alignment during hardware installation. Solid wood corner blocks that are glued and power nailed keep the cabinet box square while it is handled, moved, and fastened to the wall, reducing time spent correcting twists or racking on site. Solid wood hanging strips on the base cabinet, positioned at the top and bottom, give predictable screw zones for mounting, which helps layouts stay level across a line of cabinets. The 3-ply, 1/2 inch engineered wood core end panels with hardwood veneers resist warping, so cabinet sides stay flat against adjacent units, improving joint lines between cabinets. The 3/4 inch solid wood toe kicks provide a consistent surface along the floor edge, helping installers scribe or shim the cabinet front to irregular flooring while keeping structural support under the frame.
The WWV12BT cabinet measures 12 inches wide, 34-1/2 inches high, and 21 inches deep, so it fits standard vanity depths and narrow filler spots in bathroom layouts.
The cabinet uses a solid 3/4 inch oak, maple or beech frame with kiln-dried rails joined by mortise and tenon and glued, giving a strong, square front for mounting doors and tops.
Solid wood hanging strips at the top and bottom of the base cabinet create defined fastening zones, helping installers anchor the unit securely to wall framing and align cabinet runs.
Solid wood corner blocks that are glued and power nailed reinforce the cabinet box, helping it stay square during handling, leveling, and fastening to surrounding cabinets.
The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide flat, stable sides that accept fasteners and present a consistent finished surface.
The 3/4 inch solid wood toe kick strengthens the cabinet front at floor level, supporting load transfer from the frame to the floor in everyday bathroom use.
The Kitchen Kompact warmwood vanity base cabinet combines a 12 inch width, 34-1/2 inch height, and 21 inch depth with a solid 3/4 inch wood frame, 3/4 inch toe kick, solid wood hanging strips, and 3-ply end panels. These construction details support building straight, level bathroom vanity runs with a recessed panel warmwood design. For projects using Kitchen Kompact warmwood fronts and standard-depth vanity tops, this WWV12BT base provides a narrow, structurally sound cabinet position in the layout. Add it where a slim base unit is required to complete a stable, aligned vanity installation.
Sold In: 1 Each