Kitchen Kompact Chadwood oven cabinet gives you a 30 inch wide, 84 inch high, 24 inch deep cabinet that is sized for typical built-in oven layouts, so you can plan vertical oven placement within a standard appliance wall run. The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, which lets you adapt one cabinet body to different oven heights during kitchen layouts or remodel work. A recessed panel design on the Chadwood doors delivers a traditional flat-panel look that matches the rest of the Kitchen Kompact Chadwood line, so oven sections align visually with base and wall cabinets. The CW30OU part number identifies this specific oven cabinet configuration, which helps during ordering, layout drawings, and future replacements.
This Kitchen Kompact oven cabinet is specified at 30 inches wide, 84 inches high, and 24 inches deep, giving you a full-height cabinet footprint that matches standard counter-depth base runs for a flush oven wall. The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, so installers can adjust the vertical opening height by taking out those drawer sections as needed. Metal support rails are part of the design, providing structural support for the oven within the cabinet cavity as the appliance is set in place. Solid wood hanging strips located on the top and bottom supply firm attachment zones, tying the tall cabinet securely to wall studs along its height.
The 30 inch wide by 84 inch high by 24 inch deep CW30OU cabinet suits applications where a full-height oven unit is planned in a standard-depth kitchen run, so the face of the oven aligns with nearby base cabinets. Made to accommodate almost every type of oven by removing the necessary lower drawer units, it works in layouts that call for single or different-height oven units within the same cabinet width. Adjustable shelves in the cabinet provide flexible storage space above or below the oven opening, which helps utilize tall wall areas that would otherwise be dead space. The recessed panel Chadwood door style and oak flat panel doors keep the oven section visually consistent with other Kitchen Kompact Chadwood cabinets in the same room.
Door frames in solid 3/4 inch oak with mortised and tenoned construction maintain square, stable door openings, which helps doors hang true on the concealed, self-closing hinges over time. Solid wood corner blocks that are glued and power nailed stiffen the cabinet box, so the case resists twisting when the oven is moved into position or when adjacent cabinets are clamped for alignment. Metal support rails give a defined bearing surface for the oven, which simplifies setting the appliance height once the lower drawer units are removed to create the opening. Solid wood hanging strips at the top and bottom distribute mounting fasteners along the cabinet height, supporting the weight of the cabinet and its contents against the wall structure. The three-ply flat panel plywood insert with rotary cut red oak veneer face, finished with a four step process of stain, sealer, sanding and catalyzed top coat, creates a uniform oak appearance that coordinates across multiple cabinets when jobs call for a matched Chadwood kitchen.
The Kitchen Kompact CW30OU Chadwood oven cabinet measures 30 inches wide, 84 inches high, and 24 inches deep, so it matches a full-height tall cabinet footprint in standard-depth kitchen runs.
The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, allowing installers to create the opening height the appliance requires.
The Kitchen Kompact Chadwood oven cabinet uses metal support rails, which provide structural bearing for the oven within the cabinet cavity during installation.
The Chadwood door frames use mortised and tenoned construction of solid 3/4 inch oak, giving rigid corner joints that help the doors stay aligned on the concealed hinges.
The cabinet has solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, which strengthen the case and provide firm wall attachment areas.
The cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, producing a consistent oak appearance and protective finish on doors and panels.
The Kitchen Kompact Chadwood oven cabinet CW30OU combines a 30 inch by 84 inch by 24 inch tall-cabinet footprint with a recessed panel oak door design, so oven walls line up with Chadwood bases and uppers. Construction details such as mortised and tenoned solid 3/4 inch oak door frames, three-ply flat panel plywood inserts with rotary cut red oak veneer, and solid wood corner blocks support long-term cabinet rigidity in an appliance wall. Metal support rails and removable lower drawer units give flexibility to adapt the opening to almost every type of oven. Use this CW30OU cabinet when the job calls for a coordinated Chadwood oven section in a standard-depth kitchen layout.
Sold In: 1 Each