Kitchen Kompact Chadwood sink base cabinet is a 42 inch wide, 32-1/2 inch high, 24 inch deep cabinet built as a sink or range base, so it anchors a run of lower cabinets while matching common appliance and countertop layouts. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch maple, creating a tight, interlocking joint that holds up under repeated door use in a busy kitchen. Oak, flat panel doors match the Chadwood style, so the visible faces align with Chadwood fronts across the job. A flat panel plywood insert uses a three-ply panel with a rotary cut hard maple veneer face, giving a stable center panel that resists warping while presenting a hard maple veneer for finishing. The cabinet is identified as CHADWOOD HANDICAP 42 RANGE/BASE/SINK and ADA compliant, so it suits accessible kitchen layouts where the base height and configuration support handicap-oriented planning.
The 42 inch width, 32-1/2 inch height, and 24 inch depth define the cabinet footprint, so it drops into a layout sized for that base dimension under counter runs. Solid wood hanging strips at the top and bottom give straight, continuous members for fastening to wall studs, aiding alignment along a run of cabinets. Solid wood corner blocks that are glued and power nailed hold the cabinet box square, which supports faster leveling and shimming because the structure is rigid. The solid 3/4 inch toe kick front lets installers scribe to floor irregularities with enough material to maintain strength after trimming. ADA compliant identification and the CHADWOOD HANDICAP 42 RANGE/BASE/SINK description indicate the cabinet is configured so it can work in handicap-oriented and accessible kitchen designs where sink or range access is a priority.
The CWH42RBS Chadwood sink base is identified as a 42 inch wide base for range or sink use, so it fits as the central base cabinet in a cooking or sink area. Its 32-1/2 inch height and 24 inch depth match standard base cabinet dimensions, supporting countertop runs that tie into adjacent cabinets. The oak, flat panel doors and Chadwood styling keep the visible front consistent with other Kitchen Kompact Chadwood units, so the sink base can be blended into full kitchens using that door profile. ADA compliant designation and the CHADWOOD HANDICAP 42 RANGE/BASE/SINK description tie this cabinet to handicap-focused layouts, aligning it with accessible design where space under or around the unit is planned into the job.
The 4 step process of stain, sealer, sanding, and catalyzed top coat is applied to the cabinet, building up a layered finish that protects the wood surfaces while giving a uniform appearance across doors, frames, and exposed parts. The rotary cut hard maple veneer face on the three-ply flat panel insert presents a hard maple surface to that finish, which helps the panel match the surrounding maple-frame look once finished. Adjustable shelves are part of the cabinet, so shelf positions can be shifted to work around plumbing for sinks or storage needs over time. Concealed, self-closing hinges on the doors pull them shut and keep the hardware out of sight from the exterior, supporting a clean front view and controlled closing action. Plywood drawers are standard, and the front to back epoxy-coated drawer system, securely attached to a solid wood strip in the back of the cabinet, guides drawer travel smoothly while the solid wood rear attachment helps the drawer system hold alignment under typical kitchen loading.
The Kitchen Kompact CWH42RBS cabinet is 42 inches wide, 32-1/2 inches high, and 24 inches deep, so it matches standard base cabinet sizing in many kitchen layouts.
The cabinet door frames use mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints that help the doors stay square through regular opening and closing.
The doors use a flat panel plywood insert made from a three-ply panel with a rotary cut hard maple veneer face, providing a stable core with a hard maple surface for the finish.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, guiding drawer motion while keeping the slides anchored.
The cabinet features concealed, self-closing hinges, so the hinges stay out of sight from the front while closing the doors fully without manual pushing.
The cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, building a layered finish that protects the wood and produces a consistent appearance.
The Kitchen Kompact ADA sink base identified as CHADWOOD HANDICAP 42 RANGE/BASE/SINK brings a 42 inch wide, 32-1/2 inch high, 24 inch deep cabinet sized for central sink or range positions. Mortised and tenoned solid maple door frames, a three-ply hard maple veneer panel insert, and solid wood corner blocks with solid wood hanging strips create a sturdy cabinet box ready to carry countertop and fixture loads. Concealed, self-closing hinges, plywood drawers with epoxy-coated drawer systems, adjustable shelves, and solid 3/4 inch toe kicks round out the working details. For projects using the Chadwood style and ADA compliant layouts, this Kitchen Kompact sink base provides a coordinated cabinet built for everyday kitchen use.
Sold In: 1 Each