Kitchen Kompact Chadwood oven cabinet is a 30 inch wide, 90 inch high, 24 inch deep oven cabinet built for standard kitchen layouts where a tall, dedicated oven enclosure is required. The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, so installers can adapt the opening on site for a wide range of oven sizes while keeping a consistent exterior footprint. Metal support rails are built in to carry the oven load, which helps transfer weight into the cabinet structure instead of relying on surrounding panels. Door frames use mortised and tenoned construction of solid 3/4 inch oak, giving the front of the cabinet a rigid, frame-and-panel structure that stays square during handling and installation. Flat panel plywood inserts with a three-ply panel and rotary cut red oak veneer face provide a matching Chadwood recessed panel look across doors while keeping panel weight manageable.
This 30 inch wide, 90 inch high, 24 inch deep Chadwood oven cabinet gives installers a fixed tall footprint to plug into standard kitchen runs, so base and wall cabinet lines stay aligned while the oven opening is customized. The design is made to accommodate almost every type of oven by removing the necessary lower drawer units, which lets the installer modify vertical oven placement inside the cabinet while preserving the finished front frame. Metal support rails are part of the cabinet, providing a stable bearing surface for the oven that spreads weight into the cabinet structure and reduces localized stress. Solid wood hanging strips at the top and bottom let the cabinet be anchored firmly to the structure, helping the tall unit stay plumb and tight to adjacent cabinets once loaded with an oven.
The Kitchen Kompact 30 inch wide x 90 inch high x 24 inch deep Chadwood oven cabinet works in kitchens laid out for a full-height oven unit where a consistent 24 inch depth and 30 inch width are desired. The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, so it fits projects where oven models vary but the cabinetry footprint must remain standard across multiple jobs or units. Door frames are mortised and tenoned solid 3/4 inch oak, tying stiles and rails together so the face frame and recessed panel doors remain stable as the tall cabinet is moved, leveled, and fastened in place. Flat panel plywood inserts with a rotary cut red oak veneer face deliver the Chadwood recessed panel style while keeping door weight moderate for tall installations. Solid wood corner blocks that are glued and power nailed reinforce the junctions of sides and rails, supporting daily door operation next to a heavy oven installation.
Metal support rails built into the cabinet give a defined, structural support point for the oven, simplifying layout and helping repeat consistent oven heights across multiple installs using the same CW30OUT cabinet. Solid wood hanging strips at the top and bottom establish clear fastening zones, so installers can anchor the cabinet securely without crushing panels, which helps keep reveals around the oven and doors even over time. The four step finish process - stain, sealer, sanding, and catalyzed top coat - creates a hardened surface that stands up to handling during installation and normal kitchen use while maintaining the Chadwood appearance. Adjustable shelves above or below the oven opening let the installer set shelf positions that clear oven trim and still use remaining vertical space efficiently. Concealed, self-closing hinges on the oak flat panel doors allow precise door alignment around the oven face while keeping hardware hidden, and the self-closing action helps doors return to a consistent closed position after access.
The Kitchen Kompact CW30OUT oven cabinet measures 30 inches wide, 90 inches high, and 24 inches deep, so it matches a standard tall cabinet footprint in many kitchen layouts.
The cabinet is made to accommodate almost every type of oven by removing the necessary lower drawer units, allowing on-site adjustment of the oven opening height and position.
The CW30OUT uses metal support rails, which carry the oven weight and spread it into the cabinet structure, helping maintain alignment around the appliance face.
Door frames are mortised and tenoned solid 3/4 inch oak with flat panel plywood inserts and a rotary cut red oak veneer face, providing a stable, recessed panel Chadwood appearance.
The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, producing a uniform Chadwood finish suited to kitchen environments.
The Chadwood oven cabinet uses concealed, self-closing hinges on the oak flat panel doors, keeping hardware out of sight while pulling doors closed for a clean front.
The Kitchen Kompact Chadwood 30 inch wide x 90 inch high x 24 inch deep oven cabinet CW30OUT gives a tall, recessed panel unit ready for standard kitchen runs where a dedicated oven cabinet is required. Construction details such as mortised and tenoned solid 3/4 inch oak door frames, glued and power nailed solid wood corner blocks, and solid wood hanging strips support stable, plumb installation beside adjoining cabinets. Metal support rails and a design made to accommodate almost every type of oven by removing the necessary lower drawer units allow flexible oven placement while holding a consistent exterior footprint. Adjustable shelves and concealed, self-closing hinges on oak flat panel doors round out the cabinet so it can be planned as the central oven element in a Chadwood kitchen run.
Sold In: 1 Each