Kitchen Kompact Warmwood diagonal corner wall cabinet describes a 24 inch wide, 42 inch high, 12 inch deep diagonal corner wall cabinet that turns a dead corner into usable storage while keeping a consistent upper run height. The Warmwood finish identifies the visual match point for kitchens built around this Kitchen Kompact series. The diagonal corner layout helps transition between adjacent wall runs, which supports cleaner layout lines around room corners. The recessed panel style matches the Kitchen Kompact flat panel door design, which keeps the look consistent with other pieces from the same product class. The manufacturer part number WW24AXT ties this unit directly to Kitchen Kompact specifications, which matters when coordinating with other Warmwood 24AXT components by that identifier.
This Kitchen Kompact Warmwood cabinet measures 24 inches wide, 42 inches high, and 12 inches deep, so it lines up with 42 inch wall cabinet runs in standard kitchen layouts. The 12 inch depth matches typical upper cabinet depth, which keeps the face frame flush with adjoining wall units in the same line. Solid wood hanging strips located on the top and bottom give installers continuous fastening points, which helps pull the back tight to the wall across the diagonal span. The diagonal corner configuration works as a transition between two wall runs, so the 24 inch width and 42 inch height can be planned into upper layouts that rely on this specific size.
The WW24AXT Warmwood corner cabinet is designed as a diagonal corner wall cabinet, so it occupies the corner space where two wall runs meet at 90 degrees. The 24 inch width defines the face dimension across the corner, which installers use when planning adjacent cabinet sizes. With a 42 inch height, this unit matches tall wall cabinet lines, maintaining a straight top alignment when installed next to other 42 inch high Kitchen Kompact wall cabinets. The 12 inch depth keeps the front edge in line with standard-depth uppers, so adjoining cabinets in the same run share a consistent front plane. Solid wood hanging strips at the top and bottom of the back give two strong fastening bands across the cabinet width, which helps support the weight of stored items when the unit is mounted at full wall height. The Warmwood finish and maple flat panel doors coordinate with other Warmwood pieces in the Kitchen Kompact product class, supporting visually unified runs around the room perimeter.
The door frames are built with mortised and tenoned construction of solid 3/4 inch maple, creating a mechanical joint that stays tight under door swing loads, which helps doors stay aligned over repeated use. Solid wood corner blocks that are glued and power nailed tie the cabinet frame together at critical joints, helping the box remain square while it is being lifted, clamped, and fastened to wall studs. The flat panel plywood insert uses a three-ply panel with a rotary cut hard maple veneer face, providing a stable door center panel that resists typical panel movement while visually matching the maple frame grain. A 4 step finishing process of stain, sealer, sanding, and catalyzed top coat builds a protective finish system over the maple surfaces, which supports appearance retention in normal kitchen environments. Concealed, self-closing hinges bring the doors fully closed at the end of travel and keep hardware hidden when shut, which supports clean face lines and consistent door positioning. Adjustable shelves allow vertical spacing to be set after installation, which lets the corner storage be tuned to actual contents without changing the cabinet box.
The Kitchen Kompact WW24AXT Warmwood cabinet measures 24 inches wide, 42 inches high, and 12 inches deep, so it fits upper runs built around those wall cabinet heights and depths.
The door frames use mortised and tenoned construction of solid 3/4 inch maple with a flat panel plywood insert, providing a strong frame and stable recessed panel for repeated door use.
The Kitchen Kompact Warmwood diagonal corner wall cabinet uses solid wood hanging strips located on the top and bottom, giving continuous fastening areas across the back.
The WW24AXT cabinet uses concealed, self-closing hinges, which keep hardware out of view when doors are closed and pull the doors shut at the end of swing.
The Kitchen Kompact Warmwood diagonal corner wall cabinet has adjustable shelves, allowing shelf height to be set to match the size of stored items.
The WW24AXT Warmwood cabinet uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a finished surface suited to normal kitchen environments.
The Kitchen Kompact Warmwood diagonal corner wall cabinet WW24AXT provides a 24 inch wide, 42 inch high, 12 inch deep solution for diagonal kitchen corners using the Warmwood finish. Mortised and tenoned solid 3/4 inch maple door frames, a three-ply flat panel plywood insert with rotary cut hard maple veneer, and solid wood hanging strips on the top and bottom give the cabinet structural and mounting advantages in daily use. Adjustable shelves, maple flat panel doors, and concealed, self-closing hinges align the interior and exterior function with other Kitchen Kompact Warmwood pieces. For projects built around Kitchen Kompact cabinets in the Warmwood 24AXT group, this corner unit fills upper corner space while maintaining finish and construction continuity.
Sold In: 1 Each