Classic Series finished end panel 48 x 36

Classic Series Finished End Panel For Cabinets

Classic Series finished end panel from Wolf Home Products provides a Saginaw door style match in a honey tone, so cabinet sides gain a coordinated finished surface during installation or retrofit work. The 48 inch width, 36 inch height, and 1/4 inch thickness give a broad, low-profile panel that covers exposed ends while keeping build-up minimal for tight runs. The vinyl honey finish on the face side matches Wolf Home Products cabinet finishes, allowing installers to continue a consistent look around the cabinet perimeter. Because the grain runs with the 36 inch dimension, the vertical orientation aligns visually when the 36 inch edge is used as the cabinet height, supporting a continuous grain appearance along base cabinet sides. Vinyl laminate on the face side only creates a defined finished face, helping installers quickly identify orientation as they apply the panel in the field.

Key Panel Details That Support Cabinet Work

• The 48 inch width gives generous coverage for standard cabinet depths, so one panel can span exposed ends without seams in many layouts, reducing layout time on site.
• The 36 inch height aligns with typical base cabinet heights, so the panel can run from floor line to top edge in one piece, supporting clean side elevations.
• The 1/4 inch thickness keeps added build-out modest, helping maintain reveal lines and clearances where cabinets sit against walls or adjacent cabinetry.
• The Saginaw door style identification ties this end panel to the same visual family, aiding consistent style selection for coordinated cabinet runs.
• The honey vinyl finish on the face side provides a color-matched exterior surface, so exposed cabinet ends present the same tone as the main fronts.
• The grain running with the 36 inch dimension supports a vertical grain look on base cabinets, which helps maintain a uniform directional appearance along a row.

Installation Orientation And Finished Face Use

This Wolf Home Products end panel is finished with vinyl laminate on the face side only, so one surface is dedicated as the visible exterior during installation. The 48 inch by 36 inch sizing allows installers to orient the panel with the 36 inch edge vertical when matching the grain direction called out as running with 36 inch panels, supporting a vertical grain look on standard-height base cabinets. At 1/4 inch thick, the panel adds a slim layer to cabinet ends, which helps keep overall cabinet width close to design dimensions when fitting between walls or other built-ins. The Saginaw door style and honey finish work together so the applied panel visually ties into matching fronts during final assembly.

How This Wolf End Panel Works In Projects

Where This Finished End Panel Is Typically Applied

This Classic Series finished end panel from The Wolf Organization, LLC is designed for use with Wolf Home Products cabinets carrying the Saginaw door style in a honey finish, so exposed cabinet sides can visually match the fronts. With its 48 inch by 36 inch footprint, the panel suits common base cabinet applications where a 36 inch height is required and additional width can be trimmed or used to wrap deeper runs. The grain direction specified as running with the 36 inch dimension helps installers align the panel vertically for base cabinets, supporting a continuous grain line from front to side. Because the vinyl laminate is on the face side, the panel presents a consistent finished exterior when oriented correctly in kitchen, bath, or other cabinet installations that use these Wolf components.

Why The Dimensions And Finish Support Consistent Results

The 48 inch width of this end panel gives flexibility to cut it to suit varying cabinet depths while still maintaining enough material for full-height coverage, so multiple exposed ends can often be addressed from a single panel in carefully planned layouts. The 36 inch height defines a clear reference for standard base cabinet side coverage, reducing measuring steps when aligning to common cabinet carcass heights. At 1/4 inch thickness, the panel provides a finished skin that does not significantly alter cabinet footprints, which helps retain alignment with countertops and adjacent units. The honey vinyl laminate on the face side is specified to match, so when paired with Saginaw door style fronts in the same finish, the overall installation presents a unified appearance. The grain running with 36 inch panels further supports this by guiding how the panel is oriented, helping installers repeat the same look across multiple cabinet ends.

Common Questions About This Honey End Panel

Select This Panel For Matching Honey Sides

Choose this Classic Series finished end panel when a Saginaw door style, honey-toned Wolf Home Products cabinet run needs matching exposed sides. The 48 inch by 36 inch by 1/4 inch format with grain running along the 36 inch dimension helps deliver a consistent look from cabinet fronts to ends. With vinyl laminate on the face side, the panel supplies a defined finished exterior for professional cabinet installations using this Wolf configuration.