
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Classic Series Finished End Panel defines the exposed side of a Wolf Home Products cabinet run in the Saginaw door style, creating a finished look that matches the Honey fronts. The 48 inch width covers taller or deeper cabinet sides in one continuous sheet, which helps installers carry the finish line visually from front frames through to the end. The 36 inch height matches standard wall cabinet layouts, so the panel aligns with common upper cabinet runs without field-built seams. The 1/4 inch depth gives a slim cladding layer over cabinet sides, which keeps overall cabinet dimensions tight while still adding a finished skin. The plywood veneer Honey construction provides a stable base for the decorative surface, supporting fast, predictable attachment to cabinet sides in typical shop or jobsite conditions.
This 48 inch wide, 36 inch high, 1/4 inch thick panel gives installers a defined rectangle to work with when trimming cabinet ends. The 1/4 inch depth adds a skin over existing casework without changing overall cabinet projection significantly, which matters when aligning with countertops or adjacent runs. With grain running along the 36 inch dimension, the panel suits vertical use in a 36 inch high span, supporting a visual match with Saginaw Honey doors that share similar vertical grain direction. The plywood veneer core under the vinyl laminate face helps the panel stay flat as it is fastened over cabinet ends, which supports tight seams at front frames and clean lines along the run.
This Classic Series Finished End Panel from The Wolf Organization, LLC is part of the Wolf Home Products cabinet offering, so it aligns with their Honey finish Saginaw door style in both tone and intent. The 48 inch width lets it cover the exposed side of base or tall cabinets, especially where a deeper or taller run needs a single, continuous sheet. At 36 inches high, it can be oriented to finish wall cabinet runs that share this common height, tying the end into the rest of the line visually. The grain running with the 36 inch dimension supports this vertical orientation, so when used on a wall cabinet end the grain direction tracks with door and drawer fronts using a similar layout.
The 1/4 inch thickness is light enough for straightforward handling yet substantial enough to act as a finishing layer over cabinet case sides, which helps maintain alignment at face frames while giving a clean finished plane. The plywood veneer Honey core provides a stable substrate beneath the vinyl laminate face, so installers can fasten through the panel into the cabinet carcass while the visible surface stays true. Because the vinyl laminate is on the face side only, orientation during install is straightforward: the finished side faces out to the room, and the reverse faces the cabinet structure. The defined 48 inch by 36 inch size lets shops and field crews plan cuts and layouts around a known rectangle, which supports repeatable workflows when multiple cabinets in the same Wolf Home Products line use matching Honey Saginaw components.
The panel measures 48 inches wide, 36 inches high, and 1/4 inch deep, giving a broad but thin sheet for covering exposed cabinet ends without significantly changing cabinet size.
The grain runs with the 36 inch dimension, so when the 36 inch side is vertical, the appearance aligns with typical vertical grain on cabinet doors and drawer fronts in matching runs.
The panel uses vinyl laminate on the face side, providing a uniform Honey finish that matches the intended Saginaw door style appearance along the exposed cabinet end.
This Classic Series Finished End Panel is designed for the Saginaw door style in the Honey finish within Wolf Home Products, supporting a coordinated look across the cabinet run.
The panel is a plywood veneer Honey construction, giving a stable base under the vinyl laminate face so it can be fastened over cabinet sides during installation.
The vinyl laminate is on the face side only so the visible surface carries the Honey finish, while the back remains oriented toward the cabinet carcass as a structural mounting surface.
The 48 inch by 36 inch by 1/4 inch Classic Series Finished End Panel in plywood veneer Honey gives you a defined solution for finishing Saginaw door style cabinet ends within the Wolf Home Products line. With grain running along the 36 inch side and a vinyl laminate on the face only, it is set up to align visually with Honey fronts while fastening directly over cabinet case sides. For projects built around this Honey finish, using this panel keeps exposed ends consistent with the rest of the run in both size and appearance.
Sold In: 1 Each