Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pembridge backplate 24K satin gold defines this Notting Hill decorative backplate as a trim piece designed to sit between a pull or knob and the cabinet surface, so it visually frames the hardware and creates a finished, deliberate look on doors or drawers. The 2-3/4 in (70 mm) length establishes the footprint on the face of the cabinet, which helps you plan layout where you need a compact backplate that still reads clearly around the pull base. The 24K satin gold finish provides a warm, soft sheen, so the backplate reads as refined metalwork rather than a bright mirror surface in typical room lighting. The Pembridge design name ties this part to the Notting Hill decorative hardware line, which helps when coordinating other pieces in the same style around a kitchen, bath, or furniture project.
The stated 2-3/4 in (70 mm) length gives you a fixed dimension to work from when setting out hole locations, so you can center the Pembridge backplate predictably on rails, drawer fronts, or stile areas without guesswork about its footprint. Because the length is specified in both inches and millimeters, it suits layouts drawn in either imperial or metric, which can streamline planning when working from mixed-dimension shop drawings. The 24K satin gold finish designation provides a clear finish target, so you can select matching pulls, hinges, or additional backplates in the same finish callout for visual continuity across the run of cabinetry.
The 2-3/4 in (70 mm) length positions this Pembridge backplate as a compact option for cabinet doors and drawers where rail or stile width is modest yet needs a defined decorative base behind the knob or pull. Its classification under decorative hardware and moldings means it is intended for visible cabinet or furniture faces, so it suits applications such as kitchen cabinets, bath vanities, and built-in casework where exposed fronts benefit from added detail. Being part of the backplates product class, this piece functions specifically as the plate that sits against the wood surface, allowing the pull or knob to stand off from the door or drawer on a visually consistent field of satin gold rather than directly on the substrate.
The Pembridge naming and Notting Hill branding place this backplate within a coordinated decorative line, which is useful when a project calls for repeating a specific style across multiple cabinets or rooms. Because the finish is explicitly 24K satin gold, the backplate visually aligns with other 24K satin gold decorative hardware selections, letting you carry the same color tone across hinges, pulls, and additional trim within the same area.
The clearly defined 2-3/4 in (70 mm) length allows installers to standardize clearances from panel edges and frame joints, so backplates land uniformly from door to door and drawer to drawer. With this fixed length, jigs or layout marks can be repeated across a run of cabinets, which supports even sightlines and reduces rework when aligning multiple pulls on tall banks or wide drawer stacks. The dual imperial and metric measurement callout helps shops that draft or machine in millimeters but communicate with field installers in inches, so everyone references the same physical size without conversion discrepancies.
The specified 24K satin gold finish gives a predictable visual outcome once installed, which matters when tying the backplate into a broader decorative hardware schedule that references the same finish description. As part of the decorative hardware and moldings category, this backplate is intended to be a visible design element on the finished face, so its dimensions and finish designation both support planning for proportion, color continuity, and alignment with other Pembridge pieces in the installation.
The Pembridge backplate has a stated length of 2-3/4 in (70 mm), which defines how much cabinet surface it covers behind the knob or pull during layout and installation.
The NHE-512-SG Pembridge backplate has a 24K satin gold finish, so its color and sheen match other decorative hardware specified with the same 24K satin gold designation.
The Pembridge 2-3/4 in cabinet backplate is by Notting Hill, placing it within a focused decorative hardware line suited to coordinated cabinet and furniture projects.
This part is classified as a backplate in the decorative hardware and moldings category, identifying it as a trim piece that sits between the cabinet surface and the pull or knob.
The NHE-512-SG number is the manufacturer part designation for this Pembridge back plate in 24K satin gold, helping you specify and reorder the exact same style and finish.
This decorative backplate is intended for cabinet and furniture faces, so it works on doors and drawers where a 2-3/4 in satin gold trim piece is desired behind the knob or pull.
The Pembridge backplate in 2-3/4 in (70 mm) length, 24K satin gold finish, and Notting Hill branding supplies a defined size, color, and style for cabinet fronts that call for coordinated decorative hardware. The NHE-512-SG part designation ties every order to this exact Pembridge back plate, simplifying repeat use across multiple rooms or phases. When a project needs a compact satin gold backplate that visually anchors knobs or pulls on doors and drawers, this specific Pembridge model aligns dimensions, finish, and design family in one clearly identified component.
Sold In: 1 Each