Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Handcrafted Hardware square knob gives cabinets and furniture a square profile in an antique brass look, so projects gain a distinct style cue from a single small part. The knob is described as a square knob with large base, which spreads its contact area on the door or drawer front to help visually ground the pull point. A 1-1/4 inch diameter size sets the hand contact area, giving fingers a defined gripping surface when opening and closing. The antique brass designation defines the visual appearance, so it coordinates with other antique brass decorative elements in the same space. The square knob is identified by manufacturer part HKN3012, which allows straightforward reordering when matching existing installations. Being listed under decorative hardware and moldings in the knobs class ties this part directly to cabinet, furniture, and millwork projects that require a finished decorative touch.
The designation as a square knob with large base signals that the contact pad at the door or drawer surface is broader than the gripping section, which can influence layout spacing on narrow rails and stiles. The 1-1/4 inch diameter defines the main gripping circle, helping plan clearances between adjacent knobs on double doors or closely spaced drawers. Because this part is categorized as a knob within decorative hardware, it is intended for a single mounting point at each door or drawer front, simplifying layout grids on cabinet faces. The antique brass finish descriptor frames it as a visible decorative element, so its placement can be coordinated with hinges and other exposed hardware in similar tones.
This square knob with large base is positioned as decorative hardware for cabinets and other casework, so it suits door and drawer fronts where a single pull point is desired. The 1-1/4 inch diameter defines how much finger contact the user has when pulling, which suits typical cabinet door thicknesses and drawer sizes in residential or light commercial casework. The antique brass characterization lets the knob serve as a style element on face frames or slab fronts, tying together doors, drawers, and surrounding moldings from the same decorative hardware and moldings family. The square form with defined base visually anchors each opening, which can help align multiple fronts in a run, especially when repeating the part number HKN3012 across many cabinets.
The defined 1-1/4 inch diameter of this Handcrafted Hardware cabinet knob makes layout more predictable when repeating hardware across a kitchen, bath, or built-in. Knowing the size of the gripping area supports consistent spacing from door edges and between paired knobs on wide drawers. The large base detail gives installers a set footprint to consider when laying out hardware relative to panel profiles or applied moldings, which can help avoid crowding raised details. The specific antique brass identifier ensures that when the same manufacturer part HKN3012 is used again, new knobs visually align with earlier phases on the project. Its clear classification as a knob in decorative hardware and moldings also clarifies its role in the hardware schedule, separating it from pulls or non-operating trim so hardware counts and placement remain accurate from plan through final installation.
The HKN3012 part is described as a square knob with large base, so it functions as a single-point pull on cabinet or furniture fronts while presenting a square profile at the touch point.
The Handcrafted Hardware square knob is specified at 1-1/4 inch diameter, which defines the main gripping area and helps plan spacing between knobs on doors and drawers.
This square cabinet knob is described as antique brass, giving it an antique brass appearance that coordinates with other decorative hardware in the same tonal family.
The knob is listed in decorative hardware and moldings under knobs, so it is intended for visible use on cabinet, furniture, and similar casework fronts.
The large base spreads the contact area on the door or drawer face, creating a more pronounced visual footprint that can align well with panel profiles or moldings.
The manufacturer part number HKN3012 uniquely identifies this antique brass square knob, aiding consistent reordering or matching when extending existing installations.
This Handcrafted Hardware HKN3012 square knob brings a 1-1/4 inch diameter grip, a large base, and an antique brass look to cabinet and furniture fronts. For projects needing repeated, clearly defined pull points in an antique brass tone, this decorative hardware knob offers a consistent, cataloged option.
Sold In: 1 Each