Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Top Line Grant 6360 carrier is a side-mount hanger from Hettich America Corporation that supports sliding door movement using a steel body and a 2-nylon wheel design, so doors travel on a guided path while the load is carried by a solid metal hanger. The 2-3/4 inch steel carrier size defines the compact hanger footprint, which helps when laying out track systems where space above or beside the opening is tight. The zinc plated finish on the steel carrier creates a corrosion-resistant surface, which matters in shop, storage, or utility areas where metal parts may face humidity over time. This hanger uses a ball bearing wheel to roll in the track, which reduces rolling resistance and helps doors move with less effort during regular use. The product is classified as sliding door hardware, so it is intended to function as part of a complete sliding assembly rather than as general-purpose hardware.
This hanger is designed for side mounting, so the installer fastens the carrier through the side of the door or panel, which keeps the fastener pattern aligned with the door edge during layout. The carrier is described as adjustable, which allows fine-tuning of the hanger position so the door height or alignment can be set relative to the track and floor after the hardware is installed. This adjustability helps when working with openings that are not perfectly level, because the hanger can be repositioned within its adjustment range to balance clearances. The dual mounting holes form a stable fastening pattern, which resists rotation of the hanger as the door slides and reduces the need for corrective rework after the door is put into service.
This product is identified as a hanger, side mount, so it functions as the connection between the sliding door and the overhead track while fastening from the side of the door. Being part of the sliding door hardware class means it is intended to work within a track-and-hanger system where the track carries the wheels and the hanger carries the door. The 2-3/4 inch steel carrier dimension defines how much vertical and horizontal space the hanger occupies near the door edge, which helps during layout when coordinating clearances with valances, jambs, or adjacent panels. Because the carrier mounts from the side, the working face of the door top can remain free of fasteners, which can be useful in applications where the top edge is exposed or part of a design feature. The dual mounting holes place fasteners in a line through the steel body, which creates a firm connection that helps the hanger stay square under the sliding load.
The hanger is described as adjustable, giving the installer a way to shift the carrier position after initial fastening to bring the door into proper alignment with stops and side clearances. This adjustment reduces time spent slotting holes or modifying the door because the fine-tuning is handled at the hanger. The 2-nylon wheel arrangement spreads the door weight over two contact points in the track, which supports smooth rolling and helps reduce localized wear along the running surface. Each wheel uses a ball bearing construction, so the rotation happens on internal bearings that lower friction and help the door move with a more consistent feel from end to end of travel. The zinc plated steel carrier protects the structural metal around the wheels, which matters when doors are cycled regularly and metal near the rolling components is exposed to handling and ambient moisture. As part of a sliding door hardware system, this side mounting hanger with rocker arms and ball bearing wheels supports repeatable, predictable door motion suited to woodworking and builder installations that specify sliding access rather than hinged doors.
The Top Line Grant 6360 carrier is a side-mount sliding door hanger classified as sliding door hardware, so it supports doors that need to move along an overhead track rather than swing on hinges.
The 2-nylon wheel design carries the door on two rolling points, which helps distribute load in the track and supports smoother travel compared with a single-wheel contact point.
The ball bearing wheel in this hanger reduces friction as the door rolls along the track, which supports easier sliding and more consistent motion over repeated use.
The side mount design fastens through the door side, which keeps the top edge free and allows installers to align carriers directly to the door edge during hardware layout.
The zinc plated steel construction provides a rigid metal body with a corrosion-resistant finish, which helps the hanger handle door loads while resisting surface rust in typical interior environments.
The adjustable hanger allows the carrier position to be fine-tuned after fastening, which helps align door height and clearances without reworking the door or track layout.
The Top Line Grant 6360 carrier from Hettich America Corporation combines a steel, zinc plated side-mount hanger with a 2-nylon, ball bearing wheel design, giving sliding door projects a defined hardware component for controlled motion. The 2-3/4 inch carrier size, dual mounting holes, and adjustable hanger layout support practical alignment work when setting up sliding openings in woodworking, cabinet, or door applications. For projects that call for sliding door hardware rather than hinged solutions, this side mounting hanger offers a focused option grounded in its defined materials, mounting style, and wheel construction.
Sold In: 1 Each