Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Topline XL Top Plate is a steel pendant bolt with a top plate used to attach a door to a carrier, giving sliding door assemblies a defined connection point between the door and the running hardware. Because this part is identified as an adjustable top plate, it supports fine-tuning the installed door position as the hardware is set up on the job. The adjustable plus or minus 3/8 inch range lets the installer shift door height within that window after mounting, which helps align door reveals when working with slightly uneven floors or headers. The top plate mounts on top of the door, so the connection remains accessible from above during fitting and adjustment. As part of Topline XL sliding door hardware from Hettich America Corporation, this component is specified for builders hardware and sliding door hardware applications where controlled door attachment and height adjustment are required.
The top plate is installed on top of the door, so layout starts from the upper edge of the panel where the carrier will connect. Because the plate functions as a steel pendant bolt with top plate used to attach the door to the carrier, its position defines how the door hangs under the track. The plus or minus 3/8 inch adjustment range then lets the installer fine-tune this hanging height without relocating the carrier, which is useful when scribing doors to existing floors or aligning door gaps. As an adjustable top plate within the Topline XL sliding door hardware family, it supports repeatable setups on multi-door runs where consistent clearances and smooth operation are required across all panels.
This adjustable top plate is identified as a Topline XL top plate in the sliding door hardware class, so it is used in sliding door assemblies that rely on a carrier system. Because it is a steel pendant bolt with top plate used to attach the door to the carrier, it sits at the interface between the wood or panel door and the moving carrier hardware above. The top plate is installed on top of the door, placing it at the upper edge of the leaf where vertical hanging loads are taken into the hardware track. Being categorized under builders hardware and sliding door hardware ties its role to interior sliding door projects where doors are suspended from carriers rather than hinged, giving installers a defined part to handle that transition.
The top plate is described as an adjustable top plate with plus or minus 3/8 inch capability, so the installer can shift the effective hanging height of the door within that adjustment window. This allows height corrections after the door and carrier are already mounted, which supports tightening up reveals without re-drilling mounting points. When multiple doors share a Topline XL sliding track, using this adjustable plate at each door connection point helps bring all door bottoms into a common line even if the floor or track is slightly out. Because the adjustment is built into the steel pendant bolt with top plate used to attach the door to the carrier, alignment can be refined directly at the connection hardware, streamlining final fitting, reducing rework on the door panel itself, and supporting efficient installation on repetitive sliding door runs.
Topline XL Top Plate is a steel pendant bolt with a top plate used to attach the door to the carrier, creating the hanging connection between a sliding door and its running hardware.
The top plate is installed on top of the door, so it sits at the upper edge of the panel where the carrier connects and takes the door load into the sliding system.
The adjustable top plate offers plus or minus 3/8 inch of adjustment, allowing the installer to raise or lower the hanging door within that range for alignment.
The plus or minus 3/8 inch adjustment lets the installer correct door height after mounting, which helps fine-tune reveals and coordinate multiple sliding doors on a shared track.
This component is listed under builders hardware and sliding door hardware, placing it within typical sliding door assemblies used in woodworking and construction projects.
The adjustable Topline XL Top Plate is produced by Hettich America Corporation, aligning it with the Topline XL sliding door hardware family.
The Topline XL Top Plate combines a steel pendant bolt with an adjustable top plate used to attach the door to the carrier, so it directly controls how a sliding door hangs from its hardware. The plus or minus 3/8 inch adjustment is built in, giving room to fine-tune height as doors are set and aligned across an opening. As a builders hardware component in the sliding door hardware class from Hettich America Corporation, it is suited to projects that rely on carrier-supported sliding doors. For sliding installations that call for controlled door attachment and on-hardware height adjustment, this adjustable top plate is a focused solution.
Sold In: 1 Each