Floor Guide 117 For Sliding Door Control

Floor Guide 117 is a sliding door hardware component from Hettich America Corporation that guides the bottom of a sliding door so the panel tracks straight along the opening. This part belongs to the sliding door hardware class, so it is designed to work as a lower guide in a track-based system rather than as a hinge or roller. The SAP description identifies it as a Topline Floor Guide 117 for a 1-3/8 inch thick door, which ties the guide to Hettichs Topline sliding door hardware family and defines the door thickness it is built around. The web description notes a steel and nylon construction, which combines a metal body with a nylon guiding surface so the door runs on a smooth, non-metal contact point while the structural part stays rigid under regular loads.

Key Floor Guide 117 Details For Buyers

• The product name Floor Guide 117 identifies this part as a dedicated lower guide, so installers can match it to drawings and hardware schedules that call out this specific guide number on sliding door assemblies.
• Hettich America Corporation as the brand ties Floor Guide 117 into a known sliding door hardware line, which helps buyers coordinate this guide with other Hettich components on the same project when a consistent hardware family is required.
• The product class Sliding Door Hardware confirms its role in a sliding system rather than a hinged or folding setup, which matters when ordering hardware that must work with tracks and rollers on cabinet or door openings.
• The SAP description Topline Floor Guide 117 for a 1-3/8 inch thick door sets the intended door thickness, so the guide geometry is suited to panels around that size without forcing unusual edge cuts or bottom clearances.
• The web description stating steel and nylon construction indicates a metal base with nylon contact, which supports stable mounting while the sliding interface is gentler on the door edge in normal use.

Installation Role And Fit For Floor Guide 117

Floor Guide 117 is specified as a Topline floor guide for a 1-3/8 inch thick door, so its slot and guide geometry are built around that door thickness during installation. In practice that means the door bottom sits in the guide at a spacing that balances clearance and containment, helping the panel stay aligned without binding under regular sliding motion. As part of the sliding door hardware class, this guide works at the floor or lower edge area while upper hangers carry the weight, so installers position it to keep the panel tracking straight along the opening. The steel and nylon description points to a guide body that mounts solidly while the nylon section makes contact with the moving door, which keeps the guiding action smoother against the door edge during normal operation.

Using Topline Floor Guide 117 On Sliding Runs

Where Floor Guide 117 Fits In Sliding Systems

The SAP description identifies this part as Topline Floor Guide 117 for a 1-3/8 inch thick door, so it is intended to sit at the lower edge of a sliding panel in a Topline-style track layout. On a typical run the door is supported by upper sliding door hardware while Floor Guide 117 provides bottom guidance, which keeps the panel from swinging or wandering as it moves. Because the door thickness is specified at 1-3/8 inch, installers match this guide to doors built to that dimension so the fit at the bottom edge stays consistent from opening to opening. This alignment between known door thickness and guide design simplifies planning for clearances at finished floors, thresholds, or cabinet bottoms when laying out the sliding system.

Why Floor Guide 117 Details Support Repeatable Results

The designation Floor Guide 117 and manufacturer part number 50104 give a clear identity for this component, which reduces ordering errors when multiple sliding door hardware pieces are specified on the same job. The classification as sliding door hardware confirms that this part is engineered for guiding movement along a track rather than supporting swing or pivot loads, so its geometry favors straight-line control at the bottom of the door. The combination of steel and nylon in the web description means the guide can present a stable base while the nylon interface handles the rubbing contact with the door edge under normal sliding use, which supports smoother motion and consistent tracking over time. Being linked to the Topline family in the SAP description also helps designers and shop foremen align this guide with matching Topline components when building out a coordinated sliding door solution.

Common Questions About Floor Guide 117 Details

Select Floor Guide 117 For 1-3/8 Inch Doors

Choosing Floor Guide 117 with the Hettich 50104 designation ties your sliding door project to a clearly defined floor guide from the Hettich America Corporation sliding door hardware range. The Topline Floor Guide 117 description for a 1-3/8 inch thick door aligns the guide with door panels built to that dimension, which supports consistent clearances and tracking from unit to unit. The steel and nylon description signals a mix of stable mounting structure and smoother guiding contact at the door edge during normal use. For buyers planning or maintaining sliding systems around 1-3/8 inch doors, Floor Guide 117 offers a clearly specified bottom guide point within the broader Topline sliding door hardware family.