Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
epoxy coated 75 lb euro drawer slides from the Pro Value Series give a 24 inch drawer a 75 lb rating, so drawers carry typical kitchen or shop loads with confidence on a defined performance level. The 3/4 inch extension design lets most of the drawer travel out while keeping some length engaged, which maintains stability when the drawer is loaded. A single captive construction keeps the drawer member correctly captured in the slide path, reducing side play that can cause racking over time. The positive stop feature brings the drawer to a repeatable open position, which helps alignment of drawer fronts and reduces slamming against face frames. Self closing action on disconnect pulls the drawer neatly into position at the end of travel, which helps fronts sit consistent and reduces bounce in everyday use. The right-hand drawer member configuration supports standard side-by-side drawer layouts in typical cabinet runs.
The mounting space requirement of 1/2 inch plus 1/32 inch, minus 0 inch clearance on each side tells you the drawer width relationship to the cabinet opening, which helps set side clearances so the slide runs freely without rubbing. A slide height of 1-1/2 inch defines how much vertical space the slide occupies on the drawer side, which supports planning for drawer side heights while keeping room for the wheel and track movement. The side mount drawer slide classification matches typical face-frame or frameless cabinet designs, because it places the load along the sides instead of under the drawer. Bottom and side mounting holes on the drawer member support either style of drawer box attachment, which can help when working with different materials or retrofit conditions in the same project.
The 24 inch euro drawer slide length suits cabinets built around a 24 inch nominal drawer depth, which is common in base cabinets and many utility or shop cabinets that need deeper storage. As a side mount drawer slide from the Pro Value Series, this hardware fits into side-mounted layouts in face-frame and European applications, so a single slide style can carry across different cabinet constructions on the same job. The right-hand drawer member layout matches one side of a standard drawer pair, which supports typical left and right slide configurations on a drawer box. With a 75 lb rating, the slide handles loads seen in general storage, small tools, or pantry items, which keeps the drawer running within its designed performance envelope in those situations. ANSI/BIFMA Grade 1 approval aligns the slide with recognized testing, which supports its use in environments where drawers are opened and closed repeatedly throughout the day.
The quiet wheel design with a polymer wheel gives the slide a rolling contact point, which reduces friction along the epoxy coated steel track and helps drawers move smoothly with a controlled feel. The epoxy coated surface on 1.2mm cold rolled steel offers a consistent, low-resistance path for the wheel, which supports repeatable motion over time without the scratchy feel of bare metal. The self closing action on lift out disconnect pulls the drawer into its final position as it nears the cabinet front, which helps fronts line up evenly and reduces partial closure that can throw off appearance. The positive stop feature defines the travel limit, which keeps drawers from pulling past the designed extension and protects both the slide and drawer front alignment. Single captive construction keeps the drawer member engaged in the slide channel, which helps maintain side-to-side stability and reduces wobble when the drawer is extended under load. Together, these details support a controlled, predictable slide movement that suits both new cabinet builds and replacements where smooth function is a priority.
This Pro Value Series 24 inch euro drawer slide length suits drawers built around a 24 inch nominal depth, aligning the slide travel with typical base cabinet and deeper utility cabinet drawer dimensions.
The Pro50 epoxy coated slide is rated at 75 lb, so drawers running on this hardware operate within a defined load limit suitable for many kitchen, office, or shop storage applications.
This side mount drawer slide uses a mounting space of 1/2 inch plus 1/32 inch, minus 0 inch on each side, guiding the relationship between drawer width and cabinet opening for smooth travel.
The drawer member has bottom and side mounting holes, allowing fastening through the drawer side or bottom edge so the slide can match different drawer box constructions.
The self closing action on lift out disconnect pulls the drawer fully into its final position, helping drawer fronts sit consistent with surrounding fronts and reducing partially closed positions.
ANSI/BIFMA Grade 1 approval indicates this drawer slide has been tested to standardized performance requirements, supporting frequent opening and closing in typical cabinetry environments.
The Pro Value Series epoxy coated 75 lb euro drawer slide in 24 inch length offers a side mount, 3/4 extension design that fits face-frame and European applications using 32mm mounting patterns. With a 1/2 inch plus 1/32 inch, minus 0 inch side clearance requirement and 1-1/2 inch slide height, it fits standard drawer and cabinet layouts while leaving space for the quiet polymer wheel movement. Selecting this ANSI/BIFMA Grade 1 tested slide provides a defined performance profile for everyday drawer use where smooth, self closing action and consistent alignment matter.
Sold In: 100 Each