Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
epoxy coated 75 lb euro drawer slides from the Pro Value Series provide a 75 lb rated solution that supports medium-duty drawer loads, so installers can match the slide to everyday cabinet storage without overspecifying hardware. This 24 inch drawer member is designated left, which organizes slide layout in production or shop builds. The slide serves bottom and side mount drawer applications, giving flexibility when working with different drawer box designs in the same project. The quiet wheel premium epoxy slide operates smoothly in both face-frame and European applications, so it suits a wide range of cabinet construction methods. A single captive design keeps the drawer member engaged with the cabinet member, which helps the drawer track consistently under load. The 3/4 extension travel gives access to stored items while keeping the drawer supported in the cabinet. Cream white epoxy coating blends with many cabinet interiors and supports a uniform look on visible hardware.
The drawer member uses bottom and side mounting holes, so installers can fasten through the slide into the drawer side or bottom edge depending on construction. Cabinet members are drilled with 32mm mounting holes, which aligns with European system line boring and speeds layout on casework built around that standard. Mounting space of 1/2 inch plus 1/32 inch, minus 0 inch clearance on each side sets the required side clearance between drawer and cabinet, guiding drawer box width during fabrication. A slide height of 1-1/2 inch defines the minimum drawer side height needed at the slide location and helps with stacking multiple drawers vertically in a tight opening. The ANSI/BIFMA Grade 1 testing and approval shows the slide has been evaluated to a recognized performance benchmark, which supports confidence when specifying for repetitive cabinet runs.
This 24 inch epoxy coated drawer member left is part of a euro-style slide assembly used in both face-frame and European applications, so it works across common cabinet box styles in shops that build multiple lines. As a side mount drawer slide in the Pro Value Series, it aligns along the drawer side, which suits standard drawer box construction with straight sides. The mounting space of 1/2 inch plus 1/32 inch on each side determines the drawer width relative to the opening, guiding cut sizes when planning a bank of drawers. Height of 1-1/2 inch keeps the slide compact enough to fit shallow drawer sides while still offering structure for the single captive design. The cream white epoxy finish on the cold rolled steel body helps the slide visually blend with light-colored cabinet interiors, supporting a consistent look when drawers are open.
The single captive configuration keeps the drawer member engaged along the slide path, which supports consistent tracking under the 75 lb rating when drawers are loaded. Polymer wheels roll along the epoxy coated surface, creating a quiet wheel premium epoxy slide that reduces operating noise and helps drawers move smoothly over years of use. Self closing action at the lift out disconnect end of travel draws the drawer fully closed, which helps align fronts without repeated manual nudging. The positive stop further defines that closed position, supporting straight, flush drawer reveals along a run of cabinets. ANSI/BIFMA Grade 1 approval indicates the slide has undergone standardized testing for performance, which helps installers use it confidently in repetitive installations. Construction from 1.2mm cold rolled steel provides a stable track for the 3/4 extension movement, helping the slide carry its 75 lb rating through the full operating range of the drawer.
The Pro Value Series epoxy coated 75 lb euro drawer slides are rated for 75 lb, so they handle typical residential or light commercial drawer contents without exceeding the slide design.
The 24 inch epoxy coated drawer member works in a 3/4 extension slide system, providing access to most of the drawer while keeping part of the box supported inside the cabinet.
These quiet wheel premium epoxy slides work in face-frame and European applications, so the same slide style can be applied across different cabinet box constructions.
Mounting space is 1/2 inch plus 1/32 inch, minus 0 inch clearance each side, so drawer width is sized to leave that clearance between the drawer and cabinet opening.
The drawer member has bottom and side mounting holes, allowing fastening through either surface so installers can match attachment to the drawer box construction.
ANSI/BIFMA Grade 1 testing and approval indicate the slide has been evaluated to a recognized performance standard, supporting use in repeat cabinet installations.
The Pro Value Series epoxy coated 75 lb euro drawer slides in this 24 inch left drawer member give a side mount solution that matches common cabinet depths while meeting ANSI/BIFMA Grade 1 requirements. With 3/4 extension travel, self closing action, and a single captive design riding on polymer wheels, the slide supports quiet, controlled movement in face-frame and European applications. Matching drawer box width to the 1/2 inch plus 1/32 inch side clearance and planning around the 1-1/2 inch slide height helps integrate these slides cleanly into new or replacement drawer work.
Sold In: 100 Each