
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice QPET bottom mount waste pullout provides a dedicated trash solution that mounts at the cabinet bottom, so installers can create a stable sliding waste area inside a base cabinet without building custom trays or frames from scratch.
The 11-3/4 inch width establishes a defined footprint for the pullout, which helps plan cabinet interior layouts where space is tight and other hardware already occupies nearby openings.
The Salice America design uses two 16 quart grey bins, giving a fixed, repeatable capacity that supports common kitchen separation setups while keeping overall depth manageable under a sink or in a smaller base cabinet run.
This unit is classified as a bottom mount trash pullout, and that configuration keeps the load anchored to the cabinet floor, which is useful when dealing with heavier refuse loads or tall doors that benefit from solid lower anchoring.
The soft closing action controls the final travel of the pullout, which reduces impact at the end of stroke and supports quieter operation in busy kitchen environments where doors and fronts are opened and closed repeatedly.
The product is part of Salice America bottom mount trash pullouts, and that category alignment helps match it to other cabinet hardware choices on the job that follow the same general mounting style.
This QPETAM332MC waste pullout is designed as an undersink trash pull-out at roughly 12 inches wide, so it fits naturally into cabinet bays where the sink base limits depth and width and where a compact, organized trash zone is required.
The bottom mount configuration places the slides and structure on the cabinet floor, which gives installers a flat reference surface and simplifies lining the unit up square to the opening and any overlay door attached to the pullout.
Soft closing action is built into the pullout mechanism, so once aligned within the cabinet, the closing behavior is managed by the unit itself, helping the door and front return gently even when users push the system closed with more force.
Because the product is specified as easy installation in the web description, it is oriented toward straightforward mounting routines common in shop or onsite cabinet work, supporting efficient deployment on runs of multiple sink or base units.
This Salice America undersink trash pull-out is identified at about 12 inches wide, which positions it well for base cabinets designed with a single narrow door near a sink, providing concealed trash right at the primary work zone.
The 11-3/4 inch dimension directs designers toward cabinet interiors that can spare that width on the floor, so the pullout can run without conflict with plumbing, disposal bodies, or adjacent pullouts sharing the same cabinet bank.
As part of the bottom mount trash pullouts class, the QPETAM332MC uses the cabinet bottom as its support platform, which is practical in frameless and face frame cabinets where the floor panel carries vertical loads.
Two 16 quart grey bins sit within this defined footprint, establishing a consistent, repeatable bin arrangement that suits kitchens aiming for dual-stream setups such as trash and recyclable, while staying compact enough for undersink cavities.
The soft closing action specified for this unit suits residential and light commercial kitchens that benefit from reduced noise, as the pullout returns smoothly instead of striking the cabinet during faster closures throughout the day.
Wurth Baer Supply lists this product under kitchen and bath cabinet trash pull-outs, aligning it with other cabinetry hardware selections for coordinated storage and waste solutions within integrated casework projects.
The defined 11-3/4 inch size gives fabricators a predictable module they can repeat across identical cabinets, reducing layout variation and supporting standardized cutting lists for doors, fronts, and interior partitions.
Using two 16 quart grey bins sets a fixed capacity that design teams can reference when calculating trash collection frequency, which contributes to choosing cabinet counts and locations tied to real daily kitchen output.
The bottom mount structure centralizes loading on the cabinet floor, which supports smoother operation when the bins are at varying fill levels, maintaining track alignment from empty to full cycles without demanding upper rail support.
Soft closing action manages the last part of travel, and this has practical benefit in protecting cabinet faces and minimizing wear on front hardware, because the mechanism controls deceleration instead of relying on user handling alone.
The easy installation statement in the web description indicates this system is configured for straightforward mounting, helping trades schedule tighter installation windows when adding waste pullouts to new or retrofit cabinetry.
The QPETAM332MC manufacturer part number ties this configuration to Salice QPET bottom mount waste pullout documentation and job records, simplifying matching components on drawings, purchase orders, and site labels for long-term maintenance.
The QPETAM332MC unit is a Salice America bottom mount trash pullout, so it functions as a sliding waste system designed to mount on the cabinet floor inside a kitchen or bath cabinet.
The Salice QPET bottom mount waste pullout is specified at 11-3/4 inches, which lets cabinet makers reserve accurate interior width and coordinate door sizing and side clearances around the pullout.
The QPETAM332MC trash system uses two 16 quart grey bins, providing a defined volume that supports planning for separate waste streams within a compact undersink or base cabinet opening.
The bottom mount design fastens the pullout to the cabinet floor, giving installers a flat, stable reference and concentrating load at the bottom panel for smooth movement under varying bin weights.
The soft closing action on this unit slows the final closing travel, which reduces noise and impact on the cabinet face and hardware when the trash pullout is pushed shut during regular use.
The QPETAM332MC waste pullout is identified as an undersink trash pull-out about 12 inches wide, making it suitable for base cabinets under sinks or in narrow cabinet bays needing organized waste storage.
The Salice QPET bottom mount waste pullout with the QPETAM332MC part number offers an 11-3/4 inch, two 16 quart bin layout that supports organized waste storage in undersink or narrow base cabinets with soft closing action built in.
For projects needing a repeatable, bottom-mounted trash solution inside kitchen or bath cabinetry, this unit from Wurth Baer Supply provides a clearly defined footprint and capacity that fits standard design and installation routines.
Sold In: 1 Each