Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice QPC Series 50 quart bin lid gives you a dedicated top for Salice QPC Series 50 quart trash bins, so the bin opening is covered and waste stays contained during normal cabinet use. The silver trash bin lid is designed for a bin footprint around 10-1/16 inches wide by 12-7/8 inches deep, so it matches the top of the coordinating QPC Series 50 quart bin and sits properly on the rim during everyday operation. The lid color is silver, so it visually matches silver Salice QPC Series bins and keeps the interior look consistent when the cabinet is opened. The part is described as a bin lid with filter, so there is a filter element built into the lid area, which helps separate the waste cavity from the room side while the bin is in service.
The bin lid is specified at 10-1/16 inches wide and 12-7/8 inches deep, so the installer can match the lid footprint to the corresponding Salice QPC Series 50 quart bin and confirm that the top coverage follows the same rectangle as the bin mouth. The lid is defined as a replacement bin component, so it can take the place of an existing QPC Series 50 quart bin lid when a previous lid is worn or missing, allowing the bin to return to covered operation without changing the base bin or cabinet configuration. The silver finish pairs with silver 50 quart bins, so the color remains consistent with the original Salice system chosen for the cabinet interior.
This Salice QPC Series 50 quart silver trash bin lid is intended for 50 quart trash bins in the Salice QPC Series, so it fits projects that already rely on that bin size and series for kitchen or bath cabinet waste management. The stated dimensions of 10-1/16 inches wide by 12-7/8 inches deep align with a 50 quart bin opening, so it suits pull-out or fixed-bin cabinet sections that were originally designed around that footprint. Because the product is categorized as a replacement bin component in the Salice QPC family, it supports service work in existing cabinetry where the original 50 quart lid needs to be swapped without altering the bin body, slide system, or cabinet carcass geometry. The silver color suits projects where the interior hardware palette is silver, so the bin area continues to match other Salice hardware within the same cabinet line.
The manufacturer description identifies this part as "BIN LID W/FILTER," so the lid incorporates a filter section within its design, which means there is an additional barrier layer between the trash cavity and the surrounding room or cabinet air paths during everyday use. That filtered lid structure helps keep the waste area more isolated while the cabinet door is closed, which is useful when trash bins are set inside active kitchen or bath work zones. The lid dimensions of 12.87 by 10.06 inches correspond to the bin mouth size, so the filter area is centered in a top that fully covers the bin opening, helping the filtered section function as intended over the entire trash load beneath it. Because the part number QPCOXXMF is dedicated to this specific filtered lid for a 50 quart bin, facilities and shops can reorder the same component and expect the same top coverage and filter placement when performing repeat maintenance across multiple identical cabinet runs.
The QPCOXXMF bin lid with filter is specified for a 50 quart trash bin, so it serves Salice QPC Series 50 quart applications that use that capacity as the base bin size.
The 12.87 by 10.06 inch size matches the 50 quart bin opening, so the lid follows the bin mouth outline and reduces interference with surrounding cabinet parts during operation.
The bin lid with filter introduces a filtered barrier in the lid area, so the trash cavity is more separated from the cabinet interior while the lid is seated over the bin.
This Salice 50 quart trash bin lid is classified as a replacement bin component, so it is suited for replacing an existing QPC Series 50 quart lid in cabinet service situations.
The silver finish on the QPCOXXMF replacement lid aligns with silver Salice QPC Series bins, so the cabinet interior appearance stays consistent when the bin section is opened.
The Salice QPC bin lid design is dimensioned for a 50 quart bin footprint, so cabinet layouts built around that bin size can maintain predictable clearances above the trash opening.
The Salice QPC Series 50 quart silver trash bin lid with filter, identified by part number QPCOXXMF, provides a dedicated top sized at about 10-1/16 inches by 12-7/8 inches for Salice QPC Series 50 quart bins, so waste openings stay covered within that footprint. For cabinet projects or maintenance work already built around Salice QPC Series 50 quart bins, this replacement bin lid supports straightforward service, consistent silver appearance, and filtered separation at the bin top during daily operation.
Sold In: 1 Each