Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Under sink pullout waste container is a practical way to add organized waste storage in sink base cabinets with limited open space around plumbing. The Rev-A-Shelf trash pull-out in this configuration is a top-mount unit designed for under sink applications in kitchen, vanity, and wet bar cabinets. This stainless steel waste container includes two separate bins, one 10 liter bin and one 20 liter bin, plus a covered lid and built-in handles for removal. The unit also uses full extension ball bearing slides to bring the bins forward for access. For buyers who need an under sink trash pull out or a door mount trash pullout for a sink base, this model comes fully assembled, installs with four screws, and includes a door mount bracket.
Key specs to confirm: This sink base pull out waste container is made for under sink applications and is intended to fit in limited spaces around existing plumbing. Buyers should confirm the cabinet opening, interior depth, available height under the sink, and clearances around drain lines, water lines, and disposal components before ordering. Verified capacity includes one 10 liter bin and one 20 liter bin, and the pullout has a 75 lb capacity. Because exact cabinet minimums and full dimensional details are not provided here, those fit measurements should be checked against manufacturer technical documentation before purchase. Any additional load, compliance, or installation details not listed here should also be confirmed with the manufacturer.
What's included: One fully assembled Rev-A-Shelf under sink pullout waste container system, two stainless steel bins, one covered lid, full extension ball bearing slides, built-in bin handles, and a door mount bracket.
What to verify before ordering: Confirm your sink base cabinet has enough interior room for a top-mount trash pullout, verify plumbing does not block travel, check whether you want to use the included door mount bracket, and review manufacturer guidance for cabinet fit and installation requirements.
This top mount trash pullout is built for buyers who need waste storage in cabinets where a standard pullout may not fit well because of sink plumbing. In many kitchen, vanity, and wet bar sink bases, the drain assembly and supply lines reduce the available side clearance and make it harder to use larger waste systems. The Rev-A-Shelf under sink pullout waste container addresses that problem by fitting under sink applications and using a top-mount format that works in limited spaces.
A common use case is a kitchen sink base where the homeowner or installer wants hidden trash storage without giving up the entire cabinet. The two-bin layout helps separate waste by volume or purpose. One 10 liter container can handle smaller daily waste, while the 20 liter container can hold the larger share. Because both bins are stainless steel and include built-in handles, they are easier to remove than loose liners or fixed buckets. The covered lid also helps keep the waste area contained inside the cabinet.
Another practical scenario is a vanity or wet bar cabinet where space is tighter and the waste load is smaller. A double waste container can still make the cabinet more usable, especially when the contents need to be removed often. Full extension ball bearing slides help by moving the bins fully forward, so access is not limited to the front edge of the cabinet. For installers, the fact that the unit comes fully assembled and installs with four screws can simplify replacement work and reduce time on site.
Buyers looking for a stainless steel trash pullout should still confirm exact cabinet dimensions and plumbing clearances before ordering. This product is described for limited-space sink base use, but the exact opening width, depth, and height requirements are not listed here. If the cabinet door will be attached to the pullout, confirm that the included door mount bracket matches your door setup and available swing clearance. Follow manufacturer installation guidance and local building requirements where applicable.
When comparing under-sink waste pullouts, the first difference to review is whether the unit is actually intended for sink base cabinets. Many pullouts are made for open cabinet interiors and can become difficult to install once plumbing is in the way. This Rev-A-Shelf trash pull-out is specifically described for under sink applications and limited spaces around existing plumbing, which makes it easier to evaluate for that use case.
Material and access also matter. This model uses two stainless steel containers rather than a single plastic bin. For buyers who want removable bins with a more finished look, that can be a useful distinction. The built-in handles support bin removal, and the covered lid adds another practical detail for enclosed cabinet storage. The full extension ball bearing slides also support easier reach compared with pullouts that stop short of the cabinet front.
Installation format is another point of comparison. A fully assembled pullout that installs with four screws can be easier to plan for than systems that require more field assembly. This model also includes a door mount bracket, which matters for buyers who want the cabinet door to move with the pullout. Rather than comparing by marketing language, buyers should compare by verified fit, mounting style, included parts, bin sizes, and whether the pullout is designed for sink base conditions. Those factors usually determine whether the product works well in a real cabinet.
This under sink pullout waste container is designed for limited spaces around existing plumbing, but exact cabinet and plumbing clearances should be confirmed before ordering.
This Rev-A-Shelf unit is a top mount trash pullout made for under sink applications.
This model includes a door mount bracket for buyers who want a door-mounted pullout setup.
This double waste container includes two stainless steel bins, one 10 liter bin and one 20 liter bin.
The stainless steel waste containers have built-in handles for easy removal.
This stainless steel trash pullout uses full extension ball bearing slides for forward access.
This Rev-A-Shelf trash pull-out comes fully assembled and installs with four screws.
This sink base pull out waste container is described for kitchen, vanity, and wet bar sink base cabinets.
This under sink trash pull out requires cabinet opening, interior depth, height, and plumbing clearance checks before purchase.
This trash pullout should be installed following manufacturer installation guidance and local building requirements where applicable.
Stainless steel waste container buyers usually get the best result by confirming cabinet fit first, then matching the pullout to the way the sink base is used every day. This Rev-A-Shelf unit includes two stainless steel bins, a covered lid, full extension ball bearing slides, and a door mount bracket in a fully assembled under-sink pullout. Before purchase, verify available room around plumbing, confirm the top-mount layout works in your cabinet, and review manufacturer technical details for final installation fit.
Sold In: 1 Each