
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This Kessebohmer Tandem Tall Frame Set provides the structural backbone for a full-height pantry pull-out, sized at 18 inches wide by 67 inches tall in a Silver finish. It is designed to fit inside a tall cabinet and serve as the mounting frame for a Tandem pantry organizer system.
A pantry pull-out relies on a rigid frame to carry shelves and guide the whole unit in and out of the cabinet cleanly. This Tandem Tall Frame Set establishes that structure at full pantry height, giving shelves a stable, vertical column to mount to and the pull-out system a defined travel path. Because the frame spans 67 inches, it reaches from a low base point to near the top of a standard tall pantry cabinet, making the full vertical run usable rather than leaving dead space at the top. Pair it with the matching Tandem slide mechanism, shelves, and hardware to complete the pull-out assembly.
The Silver finish sits in the middle of the Tandem palette, reading as a bright, polished metal tone rather than the darker Anthracite or the warmer Champagne offered in the same series. For kitchens with stainless appliances, chrome pulls, or a light neutral cabinet interior, Silver integrates without drawing attention to the frame itself. The tall format at 67 inches is built to hold up under the load demands of a full pantry rather than a short base-cabinet unit, so the frame proportions reflect the weight and leverage of a taller stack of shelves.
This frame set is the right starting point for a custom kitchen renovation or a cabinet shop building a pantry pull-out into a tall face-frame or frameless cabinet with at least a 19-1/2 inch clear opening. Designers specifying a complete Tandem pantry system should confirm that all other Tandem components, slides, shelves, door brackets, and top guides, are ordered alongside this frame. The 18-inch width suits a single-column pantry run; wider cabinets may call for a wider frame set or a side-by-side configuration. This is a frame component, not a complete pantry pull-out kit.
No. This is the tall frame set only. The slide mechanism, shelves, door bracket, and top guide are Tandem series components ordered separately to complete the pull-out assembly.
The frame requires a minimum cabinet opening of 19-1/2 inches wide. Measure the clear interior opening before ordering.
Silver is a bright, neutral metal tone. The Tandem series also comes in Anthracite and Champagne; choose the finish that coordinates with the surrounding cabinet hardware and interior.
The Tandem system is used in both construction types, but installation method may vary. Refer to the Kessebohmer Tandem installation guide for the specific mounting approach suited to your cabinet construction.
Start the Tandem pantry pull-out build with this Silver tall frame set, sized to carry a complete shelf stack in a 19-1/2 inch or wider cabinet opening from the bottom of the run to the top.
Sold In: 1 Set