Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray pull-down shelf is a pull-down shelf designed for frameless wall cabinets, so it brings the cabinet contents down to a reachable level while staying aligned to modern frameless construction. The unit is built as a single tray system, which creates one full, continuous storage surface that keeps items together instead of split across tiers. The shelf is designed for a 27 inch cabinet opening, which targets a common wall cabinet width so layout planning in standard kitchens stays straightforward. The internal minimum depth requirement of 11 inches keeps the mechanism within typical wall cabinet dimensions, helping it fit within standard carcass depths. An internal minimum height requirement of 19.5 inches gives the tray and arms room to move, so the pull-down action clears the cabinet front smoothly. A load rating of 18 lbs supports everyday stored items while respecting the motion hardware limits.
The iMove 1-Tray pull-down shelf is designed for frameless wall cabinets, which aligns it with cabinets that do not use a face frame and rely on side panels for mounting. The 27 inch cabinet opening requirement defines the horizontal span the unit is built around, which lets installers size the shelf to cabinets that share that clear opening width. An internal minimum depth of 11 inches gives a numeric target for cabinet box depth, which allows the tray to sit fully inside the cabinet while still traveling down in front. The internal minimum height of 19.5 inches defines the vertical space needed inside the cabinet, which avoids interference between the moving tray and the top or bottom panel during operation. The load rating of 18 lbs sets an intended working load, which supports predictable movement of the soft-open and soft-close functions under typical storage weight.
This Kessebohmer USA Inc iMove 1-Tray pull-down shelf is classified under wall cabinetry organizers and fillers, which positions it specifically for use inside wall cabinets rather than base units. The design as a pull-down shelf for frameless wall cabinets ties it to cabinet constructions where hinges and interior hardware mount directly to the cabinet sides, which keeps the load close to the cabinet structure. The tray pulls down 13.375 inches from its stowed position, which brings the storage surface closer to the user and improves access to items stored high in the cabinet. That 13.375 inch travel distance defines how far the shelf moves into the working zone, which affects how low glasses, containers, or pantry items can be presented when the mechanism is operated. The internal minimum depth of 11 inches and internal minimum height of 19.5 inches together frame a working envelope inside the cabinet, which helps the arms and tray move through their arc without contacting cabinet panels.
The iMove 1-Tray pull-down shelf features soft-open and soft-close behavior, which manages the motion of the tray so it moves more controlled at the beginning and end of travel. That controlled motion reduces abrupt stops as the tray reaches its limits, which can help keep stored contents steadier during operation. The 18 lbs load rating sets the engineered working load for the tray and mechanism, which aligns the soft-open and soft-close functions with a defined weight range. When used within that 18 lbs rating, the motion control is tuned for consistent resistance and speed, which supports repeatable performance each time the shelf is pulled down or returned. The frameless design intent means the system is dimensioned for side-panel mounting common in frameless wall cabinets, which positions the pivot points to use the full 13.375 inch pull-down distance while keeping the tray centered in the 27 inch opening. The combination of these details gives installers concrete numbers to work with for cabinet selection, interior space planning, and expected movement of the occupied tray.
The iMove 1-Tray pull-down shelf is designed for frameless wall cabinets, which suits cabinets that rely on side panels rather than a face frame for interior hardware mounting.
The iMove 1-Tray pull-down shelf is designed for a 27 inch cabinet opening, which aligns it with wall cabinets that share that clear front opening width.
The tray on the Kessebohmer 2504930103 pulls down 13.375 inches, which lowers stored items toward the user for improved reach and visibility.
The iMove 1-Tray pull-down shelf has an 18 lbs load rating, which defines the intended working weight for stored items on the tray during repeated pull-down cycles.
The pull-down shelf requires an internal minimum depth of 11 inches and an internal minimum height of 19.5 inches, which provide clearance for the mechanism and full tray movement.
The iMove 1-Tray pull-down shelf uses soft-open and soft-close functions to control movement, which helps moderate the speed of the tray at the start and end of travel.
This iMove 1-Tray pull-down shelf from Kessebohmer USA Inc is built for frameless wall cabinets with a 27 inch opening, which gives installers a defined target cabinet size. With its 18 lbs load rating, 11 inch internal minimum depth, 19.5 inch internal minimum height, and 13.375 inch pull-down travel, the unit offers clear working dimensions for layout and cabinet selection. Add this soft-open, soft-close pull-down organizer when a single tray solution is needed to bring wall cabinet storage into easier reach in everyday use.
Sold In: 1 Each
