Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray Pull-Down Shelf gives a single pull-down tray solution for a 24 inch cabinet opening, so the contents of a frameless wall cabinet move down into easy reach instead of staying high above the user. This Kessebohmer USA Inc wall cabinetry organizer is part of the wall cabinet pull-out systems category, so it is built for upper cabinet storage applications where vertical access is the main challenge. The pull-down shelf design creates a controlled movement path, which helps in tight kitchen layouts where door swing and user reach are both factors. A soft-open and soft-close motion manages the travel of the tray, which reduces abrupt movement when starting or finishing the pull-down cycle and supports a smoother experience in daily use. The single-tray format concentrates the 18 lbs load rating onto one level, which simplifies planning for what can be stored while staying within the specified load capacity.
The pull-down shelf is designed for frameless wall cabinets, which means the mounting references are the cabinet sides rather than a front frame, so layout follows the clear internal width and height. The size of internal minimum depth is 11 inches, which sets how far the cabinet interior must extend from front to back to allow the tray and pull-down mechanism to operate without interference. The size of internal minimum height is 19.5 inches, which defines the minimum vertical space needed so the tray can move through its arc inside the cabinet. The shelf pulls down 13.375 inches, which brings the tray significantly lower than its stored position and helps users access items from below the wall cabinet line in everyday work at the counter.
This iMove 1-Tray Pull-Down Shelf is specified for a 24 inch cabinet opening, which aligns it with common 24 inch frameless wall cabinets in kitchen and bath runs where upper storage is part of the design. Placement in a frameless wall cabinet takes advantage of the internal minimum depth of 11 inches, which supports storing typical pantry items or small kitchen goods within the tray footprint. The internal minimum height of 19.5 inches allows the pull-down system to travel inside the cabinet, which suits wall cabinets with enough vertical interior to accommodate both the stored and lowered positions. The wall cabinetry organizers and fillers product class positions this tray as part of an overall organization plan, which helps installers integrate it with other wall cabinet pull-out systems along the same elevation. The pull-down shelf movement brings the tray 13.375 inches down, which is especially useful over worktops where users frequently reach overhead and benefit from a lower access point.
The soft-open and soft-close function on the pull-down shelf manages the motion profile, which supports repeatable operation by reducing sudden starts and stops that could affect stored items over time. The 18 lbs load rating defines the mechanical expectation for the shelf, which helps maintain consistent performance when installers and users keep the load within this rating during long-term use. Being designed for frameless wall cabinets gives the mounting geometry a defined reference, which supports consistent alignment from one installation to the next in similar cabinet constructions. The 24 inch cabinet opening specification keeps the tray width matched to typical cabinet modules, which supports even reveals along a wall run when coordinating door and interior hardware. The defined pull-down travel of 13.375 inches creates a predictable lower position, which lets designers coordinate the arc of movement with backsplashes or adjacent elements in the workspace.
The iMove 1-Tray Pull-Down Shelf is designed for frameless wall cabinets, which uses the cabinet sides as mounting surfaces in typical European-style construction.
The iMove 1-Tray Pull-Down Shelf is specified for a 24 inch cabinet opening, which aligns with standard 24 inch frameless wall cabinet widths in many kitchen layouts.
The pull-down shelf has an 18 lbs load rating, which guides how much stored product can be placed on the tray for consistent operation and longevity.
The iMove 1-Tray Pull-Down Shelf pulls down 13.375 inches, which brings the tray closer to the user for improved access beneath the wall cabinet line.
The pull-down shelf requires a size of internal minimum depth of 11 inches, which ensures the tray and mechanism can operate fully inside the cabinet.
The iMove 1-Tray Pull-Down Shelf needs a size of internal minimum height of 19.5 inches, which provides room for the tray to move between stored and lowered positions.
The iMove 1-Tray Pull-Down Shelf with soft-open and soft-close is tailored to a 24 inch cabinet opening in frameless wall cabinets, which aligns directly with many modern upper cabinet runs. The specified 18 lbs load rating, 11 inch internal minimum depth, and 19.5 inch internal minimum height define clear parameters, which support confident planning when laying out wall cabinetry organizers and fillers. The 13.375 inch pull-down travel moves storage into a reachable zone, which can add functional value to tall wall cabinets. For projects using Kessebohmer USA Inc pull-out systems, selecting this iMove single tray model helps complete an organized, accessible upper cabinet configuration.
Sold In: 1 Each
