Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray pull-down shelf from Kessebohmer USA Inc creates a single pull-down storage level in a wall cabinet, so items in higher spaces move down into easy reach. This pull-down shelf is designed for face frame wall cabinets, which lets it integrate into standard framed kitchen wall units. The tray is sized for a 27 inch cabinet opening, so the mechanism and tray work within that specific width range. A soft-open and soft-close action on the pull-down shelf controls movement, which reduces abrupt motion when lowering or returning the tray. The system uses a pull-down mechanism to move the shelf 13.375 inches, which brings stored items forward and lower for better visibility and access. An 18 lbs load rating sets the working capacity of the pull-down shelf, which defines how much weight the organizer should handle in day-to-day use.
This Kessebohmer pull-down shelf is designed for face frame wall cabinets, so it aligns with construction where a front frame defines the cabinet opening. The tray is for a 27 inch cabinet opening, which focuses the system on a specific cabinet width and helps avoid mismatch with narrower or wider cases. The size of internal minimum depth is 11 inches, which means the cabinet interior needs at least that depth for the tray to sit fully inside while still moving freely. The size of internal minimum height is 19.5 inches, which allows the tray and arms to cycle through the pull-down motion inside the cabinet without interference. The standard protrusion of hinges is 1 inch, which suits common wall cabinet hinge layouts and supports clearance between the tray hardware and door hinges during operation.
The pull-down shelf is designed for face frame wall cabinets, so it situates best in upper cabinets built with a frontal frame around the opening. The tray sized for a 27 inch cabinet opening lets installers target a common wall cabinet width and dedicate that bay to pull-down storage. With a size of internal minimum depth of 11 inches, the organizer fits cabinets that match typical kitchen wall depths, providing space for pantry items while still clearing the back panel. The size of internal minimum height of 19.5 inches helps determine which cabinet compartments are suitable, so the pull-down motion can occur in a taller section without striking fixed interior structures. The shelf pulls down 13.375 inches, which moves stored contents closer to the user within that framed opening and improves access to items normally kept toward the top. A standard protrusion of hinges of 1 inch coordinates well with typical wall cabinet doors, so the hardware movement stays inside the clearance zone defined by common hinge throws.
The iMove 27 single tray pull-down uses a soft-open and soft-close function, which moderates speed as the tray starts and finishes moving, helping the shelf travel smoothly in repeated use. The pull-down shelf employs a defined 18 lbs load rating, which informs how the tray should be stocked so the mechanism delivers consistent performance under regular kitchen loads. Because the shelf pulls down 13.375 inches, the travel distance remains predictable each time, helping users place frequently used items where they land in the same reachable zone. The size of internal minimum height of 19.5 inches and internal minimum depth of 11 inches form a fixed interior envelope, so once a cabinet qualifies, installers can expect the same clearance pattern on every unit with that configuration. The design for a 27 inch cabinet opening and standard protrusion of hinges of 1 inch gives a repeatable framework across similar wall cabinets, which aids in planning multiple installations along a run of upper cabinets.
The pull-down shelf is designed for face frame wall cabinets, so it fits upper cabinets that use a front frame around the opening.
The iMove 1-Tray pull-down shelf is specified for a 27 inch cabinet opening, aligning the tray width with that cabinet size.
The pull-down shelf has an 18 lbs load rating, which sets the practical weight capacity for stored items on the tray.
The iMove tray pulls down 13.375 inches, which brings stored items closer to the user inside the cabinet opening.
The pull-down shelf needs an internal minimum depth of 11 inches, allowing the tray to sit and move without contacting the cabinet back.
The organizer requires an internal minimum height of 19.5 inches so the tray and arms can complete the pull-down motion inside the cabinet.
The iMove 1-Tray pull-down shelf for a 27 inch cabinet opening brings higher storage down into reach while staying within an 18 lbs load rating. Its design for face frame wall cabinets, defined internal minimum depth, and internal minimum height help align this Kessebohmer pull-down shelf with wall cabinets that match those dimensions, so installers can plan organized, repeatable upper cabinet layouts around this pull-down organizer.
Sold In: 1 Each
