Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-tray pull-down shelf is a pull-down shelf designed for frameless wall cabinets, so it brings storage from overhead to a reachable position without changing the cabinet layout. It fits a 24 inch cabinet opening, which aligns with common wall cabinet widths in many kitchen runs. The shelf pulls down 13.375 inches, moving contents toward the user so items stored high in the cabinet can be accessed in front of the face frame line of surrounding cabinetry. The unit has a load rating of 18 lbs, giving installers a clear weight guideline when planning what customers can store on this tray. Its champagne and maple appearance ties in with typical kitchen finishes, so the organizer can sit in a visible upper cabinet run without clashing with surrounding materials. This single tray configuration suits projects where one full-width pull-down level is preferred over split or multi-tray layouts.
This pull-down shelf is designed for frameless wall cabinets, so it works with side panels that act as the primary mounting surfaces rather than face frames. The required 24 inch cabinet opening sets a clear width target, which helps align cabinet selection with the organizer before any drilling or layout steps. An internal minimum depth of 11 inches defines how far back the cabinet must run to house the shelf and pull-down mechanism without interference. The internal minimum height of 19.5 inches sets the needed vertical opening, so the tray can travel through its 13.375 inch pull-down path without contacting shelves above or below. Together, these fixed cabinet dimensions give tradespeople concrete measurements for planning the organizer into a wall cabinet row during design or retrofit work.
This pull-down shelf is designed for frameless wall cabinets, so it belongs in upper cabinet runs where side panels are exposed internally and there is no face frame projection. With a 24 inch cabinet opening requirement, it suits cabinets built to that width in kitchens, break rooms, or similar wall-mounted storage areas. The internal minimum depth of 11 inches means it aligns with standard-depth wall cabinets that meet or exceed this measurement, letting the mechanism and tray sit fully inside the unit. An internal minimum height of 19.5 inches makes it suitable for cabinet bays where a tall vertical compartment is available, providing enough room for the full 13.375 inch pull-down motion. The champagne and maple configuration fits projects where light-toned interiors or warm metallic accents are part of the cabinet package, so the organizer integrates visually in the open cabinet space.
The 18 lbs load rating on this iMove 1-tray pull-down shelf defines a clear working capacity, so it is suited to everyday items that stay within this limit rather than heavy cookware. By keeping stored weight within 18 lbs, the pull-down mechanism can operate as designed without strain that could affect motion over time. The shelf pulls down 13.375 inches, which moves contents to a lower, more forward position, reducing the reach needed to access the back of the tray. This travel distance allows shorter users or seated users to interact with the shelf more directly, especially when the cabinet is mounted at a typical wall cabinet height. Because the organizer is a single tray design for a 24 inch cabinet opening, it spans the full width of that bay, so the entire load moves in one motion instead of split sections. The frameless construction design means mounting points align with the cabinet sides, promoting consistent operation when the cabinet carcass is built to standard tolerances.
This pull-down shelf is designed for frameless wall cabinets, so it mounts to the cabinet sides where there is no face frame projecting into the opening.
This iMove 1-tray pull-down shelf is specified for a 24 inch cabinet opening, so it fits wall cabinets built to that clear internal width.
The pull-down shelf requires an internal minimum height of 19.5 inches, which lets the tray travel through its full pull-down range without hitting shelves above or below.
This Kessebohmer 2504870103 shelf calls for an internal minimum depth of 11 inches, providing enough room for the tray and pull-down mechanism inside the cabinet.
The shelf pulls down 13.375 inches, shifting stored items lower and forward so they can be reached more easily from in front of the cabinet.
This pull-down shelf has an 18 lbs load rating, guiding how much weight can be placed on the tray for consistent performance.
This iMove 1-tray pull-down shelf from Kessebohmer USA Inc is specified for a 24 inch cabinet opening in frameless wall cabinets, giving installers a defined target cabinet size. With an 18 lbs load rating and a 13.375 inch pull-down travel, it shifts storage into easier reach while staying within stated performance limits. The required internal minimum depth of 11 inches and internal minimum height of 19.5 inches supply clear planning dimensions for cabinet layout work. For projects using champagne and maple interior tones, this organizer aligns with that finish direction while adding a functional pull-down element. Add this wall cabinet pull-down organizer to jobs where frameless construction and a 24 inch bay are already part of the plan.
Sold In: 1 Each
