Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray pull-down shelf is a wall cabinet organizer that brings the cabinet contents down 13.375 inches, so items stored high in a 24 inch opening are easier to reach from the front of the cabinet. The design is specifically for face frame wall cabinets, which keeps the mechanism aligned with common framed kitchen construction. Soft-open and soft-close action manages the movement of the tray, so the pull-down motion is controlled and the return to the cabinet is smooth. The shelf has an 18 lbs load rating, which defines the usable storage capacity for everyday kitchen items without overloading the mechanism. A minimum internal depth of 11 inches is required, giving planners a clear depth line when laying out wall cabinets around this unit. The internal minimum height of 19.5 inches sets the vertical clearance needed for the tray and arms to operate within the cabinet.
This iMove 1-Tray pull-down shelf is designed for face frame wall cabinets, so the mounting layout aligns with framed construction rather than frameless systems. A 24 inch cabinet opening is specified, which guides cabinet selection or layout when integrating this organizer. The minimum internal depth of 11 inches provides a depth boundary for case construction, keeping the mechanism and tray within the cabinet interior. An internal minimum height of 19.5 inches is required, giving the moving arms and tray room to operate without conflicting with the cabinet top or bottom. The shelf pulls down 13.375 inches, so the arc of travel stays within the working zone directly in front of the cabinet. A standard hinge protrusion of 1 inch is noted, which helps when coordinating this unit with existing door hinge layouts on the same cabinet line.
This Kessebohmer USA Inc iMove 1-Tray pull-down shelf is a wall cabinet organizer classified under wall cabinetry organizers and fillers, so it naturally fits upper cabinet storage runs. It is designed for face frame wall cabinets, matching common North American kitchen construction where a front frame defines the opening. With a 24 inch cabinet opening requirement, it aligns with standard wall cabinet widths often used above counters or appliances. The shelf needs an internal minimum depth of 11 inches, which is typical of many wall cabinet interiors, allowing the mechanism and tray to sit fully inside the case. An internal minimum height of 19.5 inches supports installations in taller sections of wall cabinets, where the extra vertical space allows the arms and tray to travel. The shelf pulls down 13.375 inches, so it brings upper contents into a more accessible height zone while still staying in front of the cabinet.
The soft-open and soft-close function on this iMove 1-Tray pull-down shelf manages both the downward and upward motion, which helps keep the movement predictable for users over repeated cycles. The 18 lbs load rating defines the working load the mechanism is built to handle, so ongoing use stays within the capacity of the system. The standard hinge protrusion of 1 inch gives a fixed reference dimension when coordinating this shelf with door hinges, helping maintain clearance as the tray moves. Designed as a pull-down shelf for face frame wall cabinets, the geometry of the arms and tray is matched to the framed opening, supporting reliable alignment in that construction style. The specified 24 inch cabinet opening focus keeps the system tuned to a known width, which supports consistent mounting positions and movement paths across similar wall cabinets.
The iMove 1-Tray pull-down shelf is specified for a 24 inch cabinet opening, which targets a common wall cabinet width in many kitchen layouts.
This iMove 1-Tray pull-down shelf is designed for face frame wall cabinets, so its mounting geometry matches framed cabinet construction.
The shelf pulls down 13.375 inches from its stored position, bringing items lower and forward for easier reach from the front of the cabinet.
The iMove 1-Tray pull-down shelf has an 18 lbs load rating, defining how much weight the tray and mechanism are intended to support during use.
This pull-down shelf requires an internal minimum depth of 11 inches, so the tray and mechanism sit and travel within the cabinet interior.
The iMove 1-Tray pull-down shelf needs an internal minimum cabinet height of 19.5 inches, providing vertical space for the arms and tray to move.
The iMove 1-Tray pull-down shelf with soft-open and soft-close is built for a 24 inch opening in face frame wall cabinets, so it targets a specific, defined cabinet type. Its 18 lbs load rating, 11 inch minimum depth, and 19.5 inch minimum internal height give clear planning dimensions for cabinet layouts. The 13.375 inch pull-down travel and 1 inch standard hinge protrusion further describe its working space. For projects matching these dimensions, this shelf offers a defined way to bring wall cabinet storage within easier reach.
Sold In: 1 Each
