Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-tray pull-down shelf is a pull-down shelf designed for frameless wall cabinets, so it brings items from high storage down to a reachable working height in one smooth motion. The shelf pulls down 13.375 inches, which creates clear access to the tray front and back, reducing overreach when loading or unloading cabinets. A soft-open/soft-close action manages movement at both ends of the travel, helping the tray move in a controlled way during daily use. The single-tray layout concentrates storage on one level, which simplifies organizing frequently used items. An 18 lbs load rating supports a moderate amount of cabinet contents while keeping motion predictable. A champagne/Maple shelf finish coordinates with many contemporary cabinet interiors, so the organizer can blend into common kitchen or bath layouts.
This pull-down shelf is designed for frameless wall cabinets, so it relies on side-panel mounting inside European-style casework. A 21 inch cabinet opening is required, which directs the organizer to a specific cabinet width range in a run. The size of internal minimum depth of 11 inches means the interior must extend that far from front to back, maintaining clearance for both tray and mechanism. The size of internal minimum height of 19.5 inches establishes the vertical space needed for the tray to travel and park, influencing shelf placement inside the cabinet. These dimensional requirements tie the unit to cabinets that can provide the proper clearance envelope.
This pull-down shelf is part of wall cabinetry organizers and fillers, so it is intended for upper cabinet installations. The 21 inch cabinet opening focus aligns the unit with common single-door or paired-door wall cabinets in kitchen and bath layouts. Because it is designed for frameless wall cabinets, it fits installations that use full-overlay fronts on cabinet side panels without a face frame. The internal minimum depth of 11 inches suits many standard upper cabinet depths, allowing the tray to operate within typical case dimensions. The internal minimum height requirement of 19.5 inches means it fits cabinets that have enough uninterrupted vertical cavity above the tray position.
The soft-open/soft-close feature manages how the shelf starts and finishes movement, which helps the tray transition from stored to pulled-down positions without abrupt motion. The shelf pulls down 13.375 inches, shifting stored items closer to hand level and reducing strain when accessing the back of the tray. The 18 lbs load rating defines the working capacity of the mechanism, supporting organized storage of common cabinet contents within that weight range. The single-tray configuration concentrates weight and access in one moving level, which simplifies loading patterns in the cabinet bay. The combination of frameless design intent, minimum depth of 11 inches, and minimum height of 19.5 inches provides a dimensional framework that supports predictable fit and repeatable installation planning.
The iMove 1-tray pull-down shelf is designed for frameless wall cabinets, so it mounts to cabinet side panels used in frameless construction.
This pull-down shelf is specified for a 21 inch cabinet opening, tying it to wall cabinets sized to provide that clear front width.
The iMove pull-down shelf needs an internal minimum height of 19.5 inches, so the cabinet cavity must provide at least that much vertical clearance.
This unit requires a size of internal minimum depth of 11 inches, which defines the front-to-back space needed for the tray and mechanism.
The shelf pulls down 13.375 inches, bringing stored items lower in front of the cabinet for easier access from floor level.
The pull-down shelf has an 18 lbs load rating, defining the weight it is built to support while maintaining consistent movement.
The iMove 1-tray pull-down shelf from Kessebohmer USA Inc is configured for a 21 inch cabinet opening in frameless wall cabinets, aligning it with many upper cabinet bays. With an 18 lbs load rating and soft-open/soft-close movement, it suits organized storage within defined weight limits. Internal minimum depth of 11 inches and height of 19.5 inches set clear cabinet conditions, helping match this champagne/Maple tray to appropriate installations. For projects needing a pull-down shelf that brings contents down 13.375 inches, this unit provides a focused option.
Sold In: 1 Each
