Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 2-Tray pull-down shelf is a pull-down shelf for frameless wall cabinets, so it brings stored items in 21 inch openings down to a reachable level in one controlled motion. The two shelves provide a defined upper and lower storage area, so frequently used items can be separated from occasional-use items for cleaner organization. The champagne and maple color combination gives a finished, furniture-like appearance, which helps the organizer blend with modern cabinet interiors. The soft-open and soft-close function controls movement during operation, so the trays transition smoothly between up and down positions. The pull-down shelf is designed for wall cabinet use, so it addresses overhead access without changing base cabinet layouts. A load rating of 18 lbs allows typical pantry and dish storage in the trays, so day-to-day items can live in the wall cabinet and still be accessible.
The pull-down shelf is designed for frameless wall cabinets, so mounting references come directly from the cabinet sides. The internal minimum depth of 11 inches dictates how far back the cabinet interior must run, so the trays and pull-down mechanism sit fully inside the box. The 25 inch internal minimum height defines the usable vertical opening, so hinge positions and shelf pins can be planned around this clear zone. The 21 inch cabinet opening requirement targets a specific cabinet width, so wall units in that run can be selected or built to match this organizer. The 13.375 inch pull-down travel sets the arc of motion, so nearby backsplashes or counters can be considered in layout while still giving the user meaningful reach improvement.
This pull-down shelf is designed for frameless wall cabinets, so it fits naturally in European-style or full-overlay cabinet lines without extra blocking. The 21 inch cabinet opening requirement positions it in mid-width wall cabinets, so it suits common pantry or dish wall sizes in many kitchen runs. An internal minimum depth of 11 inches focuses use on standard-depth wall cabinets, so it integrates into typical upper cabinet boxes. The 25 inch internal minimum height favors taller interior openings, so it makes the most sense in wall cabinets where an uninterrupted vertical compartment is available above or behind doors. The 18 lb load rating supports everyday contents such as dishes or pantry containers within that limit, so the organizer can handle routine wall cabinet storage demands.
The 13.375 inch pull-down travel is a defined movement range, so installers can set door clearances and countertop layouts around a known arc and repeat it across similar wall cabinets. The frameless design target standardizes side-mount locations, so layout measurements and drilling patterns can be reused from job to job within the same cabinet line. The internal minimum depth of 11 inches and height of 25 inches act as clear acceptance checks during design, so only cabinets with enough interior volume are selected for this organizer and rework is reduced. The 21 inch cabinet opening specification fixes the width envelope, so matching doors and fronts can be ordered or built around that opening with confidence. The 18 lb load rating gives a defined weight threshold for contents, so users can stock the trays appropriately for long-term, consistent operation. The champagne and maple finish identifies a specific visual look, so designers can plan interior color coordination around a known appearance.
The pull-down shelf is designed for frameless wall cabinets, which guides cabinet selection and mounting locations in European-style or full-overlay installations.
This organizer is specified for a 21 inch cabinet opening, focusing its use on wall cabinets built or chosen around that clear opening width.
This pull-down shelf needs a minimum internal space of 11 inches depth by 25 inches height, providing room for the trays and mechanism to move freely.
The shelf pulls down 13.375 inches, bringing the trays closer to the user and improving reach from the wall cabinet position.
The pull-down shelf has an 18 lb load rating, which supports typical wall cabinet items within that weight for consistent operation.
This pull-down wall organizer is manufactured by Kessebohmer USA Inc under manufacturer part number 2505170103.
This iMove 2-Tray pull-down shelf is built for frameless wall cabinets with a 21 inch opening, so it targets a clearly defined cabinet type. The 11 inch depth, 25 inch height, and 13.375 inch pull-down travel give fixed layout numbers, so planning and repeat installations stay consistent. The 18 lb load rating and two-shelf configuration suit everyday wall cabinet storage duties. For projects using champagne and maple interiors, the finish ties the organizer visually into the run. When those cabinet dimensions and design goals match the job, this pull-down wall organizer is a focused, task-ready choice.
Sold In: 1 Each
