
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
iMove 2-Tray pull-down shelf is a pull-down shelf system from Kessebohmer USA Inc designed for face frame wall cabinets, so upper storage can be brought down to a more reachable working height. The 2-tray layout provides two separate shelf levels, which helps organize frequently used items within a single wall opening. The soft-open and soft-close function controls movement as the shelf is pulled down and returned, which supports smoother operation in everyday kitchen use. This version is specified for a 21 inch cabinet opening, so it targets a common wall cabinet size in kitchen layouts. The unit has a silver and maple appearance, which coordinates with many contemporary and traditional cabinet interiors. It is sold in each quantities, which suits one-cabinet-at-a-time installation scheduling on kitchen or bath projects.
The internal minimum size is specified as 11 inches depth by 25 inches height, which defines the usable cavity required inside the wall cabinet for fitting this pull-down unit. The shelf pulls down 13.375 inches from its stored position, which describes how far the trays move toward the user and helps plan clearances with counters or backsplashes. The standard protrusion of hinges is 1 inch, which accounts for typical hinge overlay into the opening when verifying usable internal space. The load rating is 18 lbs, which sets the maximum working load the mechanism and trays are designed to support during normal operation.
This iMove 2-Tray pull-down shelf is classified under wall cabinetry organizers and fillers, so it is intended for use inside wall cabinets where vertical space is available but access can be difficult. The 21 inch cabinet opening requirement ties it to wall cabinets built around that specific frontal width, which helps designers and installers align it with planned cabinet modules. Its design for face frame wall cabinets fits projects using framed construction styles, so the mechanism works within stiles and rails at the front of the cabinet. The specified internal minimum depth of 11 inches means cabinets with this or greater depth can host the pull-down system without encroaching into the back panel. The internal minimum height of 25 inches allows the two trays and moving arms to travel within the cabinet interior while still clearing the top and bottom.
The soft-open and soft-close action on this iMove 2-Tray pull-down shelf manages the motion of the trays during each cycle, which reduces abrupt starts or stops as the mechanism is moved. The 13.375 inch pull-down distance defines the travel needed in front of the cabinet, which helps installers coordinate with counter depth and any nearby obstructions so the shelf can move freely. The 18 lb load rating provides a clear working limit for distributed weight on the two trays, which helps maintain consistent movement of the pull-down over time. The 1 inch standard protrusion of hinges tells installers how much hinge hardware extends into the opening, which matters when checking that the internal minimum depth and height remain available for the moving trays. The silver and maple combination gives a neutral interior look, which helps maintain a clean visual result when the pull-down is operated repeatedly in finished kitchens.
This iMove 2-Tray pull-down shelf is designed for face frame wall cabinets, which aligns it with framed cabinet constructions commonly used in many kitchen installations.
This iMove 2-Tray pull-down shelf is specified for a 21 inch cabinet opening, so it is suited to wall cabinets with that front opening width.
The iMove 2-Tray pull-down shelf requires an internal minimum size of 11 inches depth by 25 inches height, which defines the cabinet cavity needed for proper movement.
The iMove 2-Tray pull-down shelf pulls down 13.375 inches from its stored position, bringing the trays toward the user for easier reach from in front of the cabinet.
The iMove 2-Tray pull-down shelf has a load rating of 18 lbs, indicating the total weight the trays and mechanism are designed to carry during normal use.
This iMove 2-Tray pull-down shelf is manufactured by Kessebohmer USA Inc under manufacturer part number 2505140102, which ties directly to projects needing this exact model.
The iMove 2-Tray pull-down shelf with soft-open and soft-close for a 21 inch face frame wall cabinet opening gives a defined internal requirement of 11 inches depth by 25 inches height and an 18 lb load rating, so it suits projects needing a controlled pull-down organizer in upper cabinets.
Sold In: 1 Each