Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-tray pull-down shelf is a wall cabinet organizer that brings stored items down to a reachable level for easier access. The shelf is designed for frameless wall cabinets, so the pull-down mechanism aligns with frameless construction and supports clean installation in that cabinet style. The unit is sized for a 33 inch cabinet opening, which fits standard 33 inch frameless wall cabinets where a single wide tray is required rather than multiple narrow units.
The system has a soft-open and soft-close action, which controls the movement of the tray during operation so the tray travels smoothly both down and up. That controlled motion protects cabinet contents from abrupt movement and keeps the pull-down action predictable for repeated daily use in a busy kitchen or shop area.
The manufacturer is Kessebohmer USA Inc, identified by part number 2505060102, which ties this specific configuration to the iMove 33 inch single tray, frameless, silver and white version for consistent reordering and matching of units across multiple cabinets.
This pull-down shelf is specifically designed for frameless wall cabinets, so the mounting layout and mechanism geometry are intended to work with side panels that do not use a face frame. That design keeps the moving tray aligned within the cabinet box during operation. The unit fits a 33 inch cabinet opening, matching common frameless wall cabinet widths and simplifying layout when planning upper storage runs. With an internal minimum cabinet depth of 11 inches, the assembly seats fully inside typical kitchen wall cabinet depths while still allowing the front of the tray to pull down toward the user.
The internal minimum height of 19.5 inches inside the cabinet supports the full 13.375 inch pull-down travel. That relationship between height requirement and travel distance ensures the tray can move down to its working position without binding, which is important when coordinating shelf positions or lighting inside the same cabinet.
This iMove 33 inch single tray model is part of the wall cabinetry organizers and fillers class, so it is intended for use inside wall cabinets rather than base units. The design for frameless wall cabinets makes it particularly useful in contemporary kitchen runs where frameless construction is standard, since the mechanism references the cabinet side panels directly. With a 33 inch cabinet opening, it suits wider wall cabinets over worktops where a single broad tray provides uninterrupted storage space.
The internal minimum depth of 11 inches aligns with common kitchen wall cabinet depths, which allows the tray to hold regularly sized pantry items within the cabinet footprint. The 18 lbs load rating supports day-to-day storage of lighter goods in this wall location, helping to organize contents above a counter without relocating them to base cabinets.
The soft-open and soft-close action built into this pull-down shelf moderates the start and end of movement so the tray does not jerk when released or slam when returned. That controlled motion slows down the travel of the 18 lbs rated load, which helps keep contents stable and reduces impact forces on the cabinet sides over repeated cycles. The 13.375 inch pull-down range is matched to the 19.5 inch internal minimum cabinet height, so each operation follows the same arc without collision with the cabinet top or bottom.
The combination of an 11 inch internal minimum depth and frameless-specific design keeps the tray centered inside the cabinet box, which supports consistent clearances on both sides in a run of identical units. The manufacturer designation IMOVE 33' SGL TRAY, FRAMELESS- SIL/WHT and part number 2505060102 identify this exact configuration, which helps installers repeat the same setup across multiple wall cabinets when standardizing storage in a project.
The iMove 1-tray pull-down shelf is designed for frameless wall cabinets, so its mechanism aligns to frameless cabinet sides for proper operation in that construction style.
The pull-down shelf is sized for a 33 inch cabinet opening, matching standard 33 inch frameless wall cabinets where a single wide tray is needed.
The iMove pull-down shelf has an 18 lbs load rating, which sets the maximum recommended stored weight for smooth and consistent pull-down and return motion.
The pull-down shelf pulls down 13.375 inches, bringing the tray significantly closer to the user and improving reach into higher wall cabinets.
The system requires an internal minimum depth of 11 inches and an internal minimum height of 19.5 inches inside the frameless wall cabinet for full travel.
The pull-down shelf is manufactured by Kessebohmer USA Inc under part number 2505060102, identified as IMOVE 33' SGL TRAY, FRAMELESS- SIL/WHT.
This iMove 1-tray pull-down shelf from Kessebohmer USA Inc combines a 33 inch single tray format, frameless wall cabinet design, and soft-open/soft-close action to support accessible upper storage. With a defined 18 lbs load rating, 11 inch internal minimum depth, 19.5 inch internal minimum cabinet height, and 13.375 inch pull-down travel, it creates a repeatable solution for organizing wall cabinets in kitchens or similar work areas where reliable reach to upper storage is needed.
Sold In: 1 Each
