Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray Pull-Down Shelf is a pull-down shelf designed for frameless wall cabinets, so it brings stored items in upper cabinets down to a reachable working height without changing the cabinet exterior. This Kessebohmer USA Inc unit is specified for a 30 inch cabinet opening, so it is suited to standard 30 inch frameless wall cabinet layouts in kitchen or bath runs. The shelf has soft-open and soft-close action, which lets the tray move smoothly at the start and end of travel to reduce abrupt movement during daily use. The internal minimum depth requirement of 11 inches defines how far the cabinet interior must extend, so installers can plan cabinet selection where this organizer will fit. An internal minimum height of 19.5 inches is specified, which keeps the mechanism and tray operating within the correct clearances inside the cabinet.
This iMove 1-Tray Pull-Down Shelf is designed for frameless wall cabinets, which uses the cabinet side panels as the mounting surface for the pull-down mechanism. The 30 inch cabinet opening specification directs it to cabinets with that clear internal width, so the tray and mechanism can align properly with the sides. An internal minimum depth of 11 inches is required, which keeps the tray fully supported when retracted into the cabinet. The internal minimum height of 19.5 inches provides the vertical room needed for both the parked and lowered positions, allowing the 13.375 inch pull-down motion to operate without interference inside the cabinet space.
This iMove 30 single tray frameless unit is specified for a 30 inch cabinet opening in frameless wall cabinetry, so it suits upper cabinets over counters where stored items sit above normal reach. The internal minimum depth of 11 inches and minimum height of 19.5 inches define the cabinet interior volume that supports the tray movement, allowing the 13.375 inch pull-down distance to clear nearby doors or frames inside the box. As a pull-down shelf for frameless cabinets, it positions well in kitchen and bath wall cabinet runs where consistent cabinet widths are used, so installers can repeat the same organizer specification across multiple 30 inch units.
The soft-open and soft-close function on this pull-down shelf controls the motion of the tray, which helps it start and finish movement more gently during daily operation. With an 18 lbs load rating, the shelf is intended to handle typical stored items within that weight range, which supports predictable performance when loaded appropriately. The 13.375 inch pull-down travel is defined, so the movement path can be anticipated relative to backsplashes or counters below. The frameless wall cabinet design focuses mounting on side panels within the specified 30 inch opening, which supports repeatable installation dimensions from one cabinet to the next.
This iMove 1-Tray Pull-Down Shelf is designed for frameless wall cabinets, which guides cabinet selection toward frameless construction when planning an installation.
The pull-down shelf is specified for a 30 inch cabinet opening, so it targets wall cabinets with that clear internal width for proper tray alignment.
The iMove shelf has an 18 lbs load rating, which defines the intended maximum stored weight for routine use on the tray and mechanism.
The shelf requires an internal minimum depth of 11 inches, which keeps the tray fully supported inside the cabinet when retracted.
This pull-down shelf needs an internal minimum height of 19.5 inches, allowing room for both the stored position and full 13.375 inch pull-down travel.
The iMove 1-Tray Pull-Down Shelf provides 13.375 inches of pull-down movement, which lowers contents to a more accessible height from the wall cabinet.
The iMove 1-Tray Pull-Down Shelf with soft-open and soft-close action pairs a 30 inch cabinet opening specification with frameless wall cabinet design, which supports consistent layouts in kitchen or bath projects. With an 18 lbs load rating, 11 inch internal minimum depth, and 19.5 inch internal minimum height, it defines clear cabinet requirements for reliable pull-down function. Use this iMove 30 single tray frameless organizer where a pull-down shelf for frameless cabinet installations will help bring wall cabinet storage into easier reach.
Sold In: 1 Each
