Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-tray pull-down shelf is a pull-down shelf designed for face frame wall cabinets, so it turns high cabinet space into reachable storage for everyday items. The product is identified as the iMove 1-Tray Pull-Down Shelf with Soft-Open/Soft-Close for a 27 inch cabinet opening, which ties the mechanism, tray size, and cabinet width together for straightforward planning. The system is supplied in a champagne finish with a maple shelf appearance, giving a neutral, cabinet-friendly look that suits many kitchen styles while keeping the working hardware visually calm. The shelf is produced by Kessebohmer USA Inc under manufacturer part number 2504960103, which allows precise reordering across jobs and clear reference in project documentation.
The pull-down shelf carries a load rating of 18 lbs, so it is intended for typical pantry items and dishware within that weight range and supports predictable performance over time. The size of internal minimum depth is 11 inches, so wall cabinets need that clear depth to let the tray operate without front interference. The size of internal minimum height is 19.5 inches, which gives the mechanism enough vertical room to pivot and travel without binding, helping the pull-down motion stay smooth. The shelf pulls down 13.375 inches, so stored items move substantially toward the user, improving reach in taller wall installations. The standard protrusion of hinges is 1 inch, which aligns this organizer with common hinge overlay situations and helps installers anticipate door swing relationships around the unit.
This pull-down shelf is intended for face frame wall cabinets with a 27 inch cabinet opening, so it is naturally suited to standard-width kitchen uppers above counters or work areas. The minimum internal depth requirement of 11 inches means typical full-depth wall boxes in residential kitchens will often satisfy the needed clearance, allowing the tray to sit fully inside the cabinet when raised. With an internal minimum height of 19.5 inches, the organizer makes the most sense in taller upper compartments, where there is enough space above the tray position to accommodate the mechanism arc. The 13.375 inch pull-down travel brings contents well below the starting shelf line, which helps users access items that would otherwise sit too high to reach comfortably. In practice, this range of motion is especially useful over countertops where users are standing directly in front of the cabinet.
The 18 lb load rating gives installers and planners a clear weight envelope, so they can assign the shelf to lighter pantry goods, dishes, or containers without overloading the mechanism. The specified internal minimum depth of 11 inches defines how far back the cabinet interior must extend, which helps avoid interference between the tray and the back panel or face frame during movement. The internal minimum height of 19.5 inches defines the clear vertical space, so layout planning can reserve that section for the pull-down unit and prevent conflicts with fixed shelves above or below. The standard hinge protrusion of 1 inch indicates how much hinge hardware can project into the opening while still allowing proper operation, so installers can coordinate hinge choice and door overlay with the organizer. Together, these defined dimensions and ratings create a predictable installation envelope that supports consistent performance across multiple cabinets on the same project.
The pull-down shelf is designed for face frame wall cabinets, which focuses its use on typical framed kitchen upper cabinets.
The iMove 1-tray pull-down shelf is sized for a 27 inch cabinet opening, which matches many standard wall cabinet widths.
The pull-down shelf has an 18 lbs load rating, guiding users to store typical pantry items or dishes within that weight range.
The system requires an internal minimum depth of 11 inches, allowing the tray and mechanism to sit and move fully inside the cabinet.
The pull-down shelf needs an internal minimum height of 19.5 inches, giving the mechanism room to pivot without interfering with cabinet structure.
The shelf pulls down 13.375 inches, moving stored items significantly closer to the user for easier reach in taller wall cabinets.
The iMove 1-Tray Pull-Down Shelf with Soft-Open/Soft-Close for a 27 inch cabinet opening combines a defined 18 lbs load rating with specific internal minimum dimensions, giving installers concrete numbers for layout and application. The pull-down travel of 13.375 inches and standard 1 inch hinge protrusion specification help align the organizer with typical wall cabinet and hinge setups. For wall cabinet projects using face frame construction where stored items sit just out of reach, this pull-down shelf provides a mapped set of dimensions and movement that can be matched to cabinet openings during planning, helping translate upper storage into everyday working space.
Sold In: 1 Each
