Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray Pull-Down Shelf is a pull-down shelf designed for face frame wall cabinets, so it brings stored items down to a reachable level while keeping them organized in an upper cabinet run. The shelf is sized for a 33 inch cabinet opening, which fits a common wall cabinet width in many kitchen layouts and helps planning on standard runs. A soft-open and soft-close function controls the motion, so the tray moves smoothly at the start and end of travel, which reduces abrupt movement when accessing contents. The system is classified under wall cabinetry organizers and fillers, which means it is intended as a functional storage upgrade for existing wall cabinets rather than a structural cabinet component. This pull-down shelf is supplied by Kessebohmer USA Inc, aligning it with a manufacturer focused on cabinet storage hardware.
This pull-down shelf is designed for a 33 inch cabinet opening, so the installer aligns the mechanism within that width to achieve proper side clearances and motion. The internal minimum depth of 11 inches means the cabinet carcass must provide at least that usable depth behind the face frame, allowing the tray and arms to move through their arc without contacting the back. An internal minimum height of 19.5 inches defines the required vertical space inside the cabinet, so the tray can sit in its upper position and still travel downward fully. The specified standard protrusion of hinges at 1 inch indicates the system is dimensioned with common face frame hinge projection, helping the tray clear the door hardware during operation.
This iMove 1-Tray Pull-Down Shelf is categorized as a wall cabinetry organizer and filler, so it is intended specifically for wall cabinet installations where access to higher shelves is limited. Its design for face frame wall cabinets means it suits framed construction commonly found in many residential kitchens, aligning with typical stile-and-rail cabinet fronts. The 33 inch cabinet opening specification targets a standard upper cabinet width, which is often installed above base cabinets or appliances, making the pull-down motion useful over counters or worktops. With an internal minimum depth requirement of 11 inches, the product fits cabinets that offer standard or deeper interiors, allowing the tray to carry items that benefit from a full-depth shelf. The internal minimum height of 19.5 inches means the unit is well suited to taller interior openings within the wall cabinet, often the full height behind a pair of doors, which provides room for both storage capacity and downward travel.
The soft-open and soft-close function is built into this pull-down shelf, so the movement is cushioned both when the shelf begins to move and when it returns, which supports controlled operation over repeated daily cycles. The defined 13.375 inch pull-down distance gives a predictable arc that brings the tray to a lower, more accessible position every time, which helps users develop a consistent reach pattern when loading or unloading items. With an 18 lb load rating, the mechanism and tray are specified to carry that weight during normal use, which guides how much product or dinnerware can be placed without overloading the motion system. The standard protrusion of hinges listed at 1 inch shows that the geometry of the shelf and arms is coordinated with typical hinge projection, helping maintain clearance so the tray moves past the door hardware smoothly. The single-tray configuration simplifies the motion path, as only one level of storage travels downward, which can assist in keeping weight distribution even across the tray surface for reliable operation. The manufacturer part number 2506420102 identifies this specific configuration, which aligns the dimensional and performance details to one defined hardware solution for repeat installations.
The iMove 1-Tray Pull-Down Shelf is designed for face frame wall cabinets, so it fits framed upper cabinets commonly used in kitchen installations.
The pull-down shelf is sized for a 33 inch cabinet opening, which aligns it with a widely used wall cabinet width in many kitchen layouts.
The pull-down shelf has an 18 lbs load rating, so the tray is specified to support that amount of stored items during regular operation.
The shelf pulls down 13.375 inches, bringing the tray lower from the wall cabinet interior into a more accessible reach zone.
The iMove pull-down shelf needs an internal minimum depth of 11 inches, providing space for the tray and mechanism to move.
The pull-down shelf requires an internal minimum height of 19.5 inches so the tray and mechanism can sit and travel properly inside the cabinet.
This iMove 1-Tray Pull-Down Shelf from Kessebohmer USA Inc combines a 33 inch cabinet opening design, face frame wall cabinet focus, and soft-open/soft-close movement to support accessible upper storage. With its specified 18 lbs load rating, 11 inch internal minimum depth, and 19.5 inch internal minimum height, it offers clearly defined installation parameters. For wall cabinetry organizers and fillers where a 13.375 inch pull-down action improves reach, this shelf provides a structured way to upgrade cabinet interiors using known dimensions and motion characteristics.
Sold In: 1 Each
