Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 1-Tray Pull-Down Shelf gives a single tray storage solution that pulls down from a wall cabinet, so stored items move to a reachable height. This matters when organizing upper cabinets for everyday use without changing existing cabinet layouts.
This pull-down shelf is designed for frameless wall cabinets, which means the mechanism and tray are engineered to mount inside cabinets without face frames. That allows installers to use it in frameless kitchens where interior space and clean fronts are priorities.
The shelf is specified for a 27 inch cabinet opening, so it is tailored to that cabinet width rather than being a generic fit-all device. That helps with planning, because casework can be laid out knowing this unit is sized for that opening.
The tray finish is Silver/Anthracite, so the visible parts coordinate with many contemporary cabinet interiors. This matters when matching modern hardware and appliances in a kitchen project.
This pull-down shelf is designed for frameless wall cabinets, so the mounting pattern anticipates cabinet sides without face frames. With a specified 27 inch cabinet opening, the unit aligns with that cabinet width, which simplifies layout when designing or retrofitting runs of wall cabinets.
The 11 inch internal minimum depth requirement means the cabinet interior must extend at least that far, which supports proper clearance for the tray and mechanism as they rotate down. The 19.5 inch internal minimum height gives the vertical envelope needed so the single tray and arms travel smoothly.
With a 13.375 inch pull-down distance, the shelf moves contents closer to the user, which can improve access in taller installations. The 18 lb load rating defines the practical storage capacity for this mechanism during everyday kitchen use.
This pull-down shelf is part of the Wall Cabinetry Organizers and Fillers class, so it is intended for use inside wall cabinets rather than bases. By being designed for frameless wall cabinets, it suits European-style cases where the cabinet side panels form the front edge.
The product is a single tray pull-down system, so one shelf surface moves down as a unit, which works well for grouping frequently used items on a dedicated level. Since it is sized for a 27 inch cabinet opening, it fits wall cabinets built to that width, allowing planners to reserve that bay for pull-down storage instead of fixed shelves.
The 11 inch internal minimum depth relates directly to standard wall cabinet depths, so when that requirement is met, the mechanism and tray operate within the case without binding. The 19.5 inch internal minimum height gives vertical room for the arms and tray profile, so they can pivot downward through their 13.375 inch travel.
The 18 lb load rating means the tray is meant to carry contents within that weight, which suits items like dishes or pantry goods within that range. The Silver/Anthracite color combination supports use in modern kitchens where visible interior hardware should coordinate with other fittings.
The Kessebohmer USA Inc iMove 1-Tray Pull-Down Shelf is specified with soft-open and soft-close functions, so motion is damped at both ends of travel, which supports repeatable operation without slamming over many cycles. The consistent motion profile is helpful when multiple units are used along a wall run.
By being defined for a 27 inch cabinet opening, the system gives a clear width target, which aids in designing cabinet runs with predictable organizer placement. Using the 11 inch depth and 19.5 inch height minimums during layout helps minimize rework, because the cabinet interior is planned around those exact clearances.
The 13.375 inch pull-down measurement is a fixed travel dimension, so installers know how far the tray will project downward during operation. That information matters when planning items below, such as counters or backsplash items, so the tray motion remains unobstructed.
The wall cabinetry organizers classification, combined with the frameless wall cabinet design intent, means the product slots into standard frameless wall cabinet construction. The 18 lb load rating provides a clear limit to plan storage around, supporting repeatable performance when multiple cabinets in a project use the same system.
The iMove 1-Tray Pull-Down Shelf is designed for frameless wall cabinets, so it fits European-style cases where the cabinet sides form the front edge.
The iMove 1-Tray Pull-Down Shelf is specified for a 27 inch cabinet opening, so it is sized for use in wall cabinets built to that width.
The pull-down shelf has an 18 lb load rating, so storage plans should keep tray contents at or below that weight for intended performance.
The pull-down shelf moves 13.375 inches from its stored position, which brings items lower in front of the cabinet for easier reach and visibility.
The iMove 1-Tray Pull-Down Shelf needs an internal minimum depth of 11 inches and an internal minimum height of 19.5 inches for full movement.
The pull-down shelf has soft-open and soft-close functions, so the tray movement starts and stops in a controlled way during regular use.
The Kessebohmer USA Inc iMove 1-Tray Pull-Down Shelf offers a single tray system dedicated to a 27 inch frameless wall cabinet opening. With an 18 lb load rating, 11 inch minimum depth, and 19.5 inch minimum height, it is sized for specific cabinet interiors.
The 13.375 inch pull-down travel and soft-open/soft-close functions support controlled movement and easier reach. For projects using Wall Cabinetry Organizers and Fillers, this frameless-focused pull-down shelf suits installers who want predictable clearances and defined storage capacity.
Sold In: 1 Each
