
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Kessebohmer iMove single-tray pull-down shelf is a wall cabinet organizer that swings stored items down from an upper cabinet to counter height, so the back and top of a deep wall cabinet stops being dead storage. This version is sized for a 30-inch frameless cabinet opening and is finished in Anthracite on both the frame and the tray.
Upper wall cabinets store a significant amount of kitchen goods, but the top shelf is often the least-used space in the room because reaching it means searching by feel or pulling out a step stool. This pull-down system changes how that space works: pulling the tray down brings whatever is stored on it to the front of the counter, in plain view and within reach. Spices, oils, small appliances, canned goods, and dry pantry items are practical candidates for the tray. Once you're done, the tray returns upward under soft-close control without slamming against the cabinet floor.
Both the frame and the single tray are finished in Anthracite, a dark, low-gloss tone that reads as a contemporary neutral inside a cabinet. The Anthracite-on-Anthracite pairing gives the hardware a cohesive look when the door is open, and it recedes when the door is closed. The ball-bearing mechanism supports the tray's travel and load through repeated daily cycles. Soft-open assists the descent and soft-close controls the return, so the tray moves deliberately in both directions regardless of how much weight is on it.
This organizer is the right choice for a frameless wall cabinet in a modern or contemporary kitchen where the hardware finish should blend with dark cabinetry or a dark interior. Kitchen designers and cabinet shops specifying wall cabinet organizers for frameless box construction will find the sizing direct: confirm the cabinet opening is at least 28-1/2 inches wide and 11 inches deep before specifying. Homeowners remodeling an existing frameless kitchen can retrofit this system into an upper cabinet without structural changes to the box. The single-tray format is well suited to a cabinet dedicated to a focused category of items rather than a general-purpose pantry load.
No. This version is built for frameless cabinet construction. It mounts to the interior walls of a box cabinet without a face frame. A separate face-frame configuration is available in the iMove line.
Soft-open provides damped, controlled resistance as the tray descends, so it does not drop freely. Soft-close controls the return trip upward. Together they make the motion smooth and quiet in both directions.
One. This is the single-tray configuration of the iMove system. A two-tray version is also available in the iMove line for cabinets where you need to organize two levels of storage.
The minimum opening width is 28-1/2 inches and the minimum depth is 11 inches. Measure the clear interior opening of the cabinet before ordering.
Specify this single-tray iMove pull-down to turn an out-of-reach wall cabinet shelf into an active, accessible storage position, with controlled soft-open and soft-close motion in a coordinated Anthracite finish.
Sold In: 1 Each