Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
iMove 2-tray pull-down shelf is a Kessebohmer USA Inc organizer that brings stored items in wall cabinets down to a reachable height, which helps streamline day-to-day use in busy kitchens or work areas. This pull-down shelf is designed for frameless wall cabinets, so it matches the construction style installers see in many modern cabinet lines. The unit fits a 21 inch cabinet opening, allowing straightforward planning when laying out standard wall cabinet runs. A load rating of 18 lbs supports everyday stored goods within its design limits, helping maintain smooth motion over time when used in typical residential or light-duty project environments. The internal minimum space required is 11D x 25H, which sets a clear cavity size for designers and installers when checking cabinet interiors. The shelf pulls down 13.375 inches, so stored items move well into the user zone, reducing awkward reaching into upper cabinets.
This pull-down shelf is designed specifically for frameless wall cabinets, so side panels act as the primary mounting surfaces during installation. The fit is intended for a 21 inch cabinet opening, which guides cabinet selection and layout in new installations or retrofits. The internal minimum depth of 11 inches establishes how far back the cabinet box needs to extend for the trays and mechanism to operate without obstruction. A required internal height of 25 inches gives the vertical clearance for both trays and the pull-down mechanism, which matters when using shorter wall cabinets. The shelf pulls down 13.375 inches from its stored position, so installers can anticipate the arc of movement relative to backsplashes or countertops below.
This Kessebohmer USA Inc iMove 2-tray pull-down shelf is intended for wall cabinetry organizers and fillers, so it plays a direct role in turning a standard wall cabinet into an accessible storage point. The product sits within the base and wall cabinet pull-out systems category, which aligns it with other motion-based storage solutions for kitchen and bath layouts. Designed for frameless wall cabinets, it fits European-style boxes commonly used in contemporary kitchens, multi-family projects, and higher-end residential work. The 21 inch cabinet opening spec means it suits cabinets sized in that width range, which is common in upper cabinet runs where designers want a balance between capacity and door size. An 18 lbs load rating suits typical pantry goods, small dishes, or supplies within that weight range, keeping the mechanism working within its intended parameters during regular use.
The internal minimum dimensions of 11D x 25H give installers clear cabinet cavity requirements, reducing layout guesswork when planning wall cabinet interiors around this pull-down organizer. A 13.375 inch pull-down distance provides a defined movement path, which helps designers coordinate the shelf with countertop heights, appliance clearances, and backsplash details. Soft-open and soft-close functions moderate the speed at which the trays move, which can support more controlled handling of contents in everyday residential or light commercial settings. The double-tray configuration keeps storage distributed on two levels, which can help maintain visibility of items while staying within the rated 18 lbs capacity. Being part of the wall cabinetry organizers and fillers product class, this unit supports projects that prioritize clean interiors and motion-oriented access in upper cabinets without changing the exterior cabinet line.
The iMove 2-tray pull-down shelf is designed for a 21 inch cabinet opening, which helps match it to common wall cabinet widths during layout and installation.
The pull-down shelf is designed for frameless wall cabinets, so it aligns with European-style construction where the cabinet sides serve as the primary mounting surfaces.
This pull-down shelf needs a minimum internal space of 11 inches depth by 25 inches height, which defines the cavity size for proper tray and mechanism movement.
The shelf pulls down 13.375 inches from its stored position, bringing stored items lower and forward for easier reach from in front of the cabinet.
The iMove 2-tray pull-down shelf has a load rating of 18 lbs, which supports typical stored contents when kept within that total weight range.
This unit is described as anthracite/anthracite, so both the visible components and trays present a matching dark-toned appearance in the cabinet interior.
The Kessebohmer USA Inc iMove 2-tray pull-down shelf with soft-open and soft-close action offers a defined solution for 21 inch frameless wall cabinet openings. With 11D x 25H internal requirements, 13.375 inch pull-down travel, and an 18 lbs load rating, it fits projects that call for accessible upper storage. For kitchens, baths, or similar wall cabinet layouts using frameless construction, this anthracite unit provides a structured organizer option ready to integrate into planned cabinet runs.
Sold In: 1 Each
