
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
iMove 1-Tray pull-down shelf is a pull-down shelf designed for frameless wall cabinets, so it brings the contents of a wall cabinet down to a reachable height while keeping the unit anchored to the cabinet interior. The single-tray format focuses all 18 lbs. load rating on one level, which helps when storing everyday items that need to move together. This model is sized for a 24 inch cabinet opening, aligning with a common wall cabinet width so it matches standard frameless layouts. An internal minimum depth of 11 inches sets the usable cabinet depth the tray can occupy, guiding where it can be placed in a run. The internal minimum height of 19.5 inches defines the clear interior space required, which matters when working around fixed shelves. The shelf pulls down 13.375 inches, bringing stored items significantly lower from the wall cabinet, which improves reach from the counter area.
This IMOVE 24 single tray model is sized for a 24 inch cabinet opening, which targets a common wall cabinet module and simplifies planning when multiple cabinets share the same width. The internal minimum depth of 11 inches defines the front-to-back clearance the tray and mechanism need, which affects where this unit can be used along a wall run. An internal minimum height of 19.5 inches sets the vertical space requirement inside the cabinet, guiding shelf placement above or below. The shelf pulls down 13.375 inches from its stored position, which creates a known movement range to coordinate with counters or backsplashes. The design as a pull-down shelf for frameless wall cabinets ties the mounting location to frameless side panels, which fits projects that use frameless construction methods.
This pull-down shelf is designed for frameless wall cabinets, so it is suited to upper cabinets that use frameless box construction. The sizing for a 24 inch cabinet opening targets a standard wall cabinet width, which fits layouts that repeat 24 inch modules. An internal minimum depth of 11 inches sets the cabinet interior depth the unit depends on, which fits typical wall cabinet depths where that clearance is available. The internal minimum height of 19.5 inches defines the needed vertical space, which fits sections of a wall cabinet where fixed shelves do not interrupt that opening. The 18 lbs. load rating sets the working capacity of the single tray, which helps when assigning this unit to lighter pantry goods or smaller kitchen items within that rating. The anthracite/anthracite finish matches projects that favor dark interior hardware, which aligns with many contemporary cabinet designs.
The soft-open/soft-close function built into this pull-down shelf manages the motion at the beginning and end of travel, which helps the tray move in a controlled way rather than abruptly. This controlled motion supports repeatable operation when the tray is regularly loaded near its 18 lbs. load rating, because the mechanism is not subjected to sudden stops. The shelf pulls down 13.375 inches from the wall cabinet interior, which creates a consistent travel distance to coordinate across multiple cabinets using the same IMOVE 24 single tray. The pull-down shelf design for a 24 inch cabinet opening gives a defined lateral footprint, which assists when aligning several units along a wall so each tray clears neighboring fronts. The internal minimum height of 19.5 inches and internal minimum depth of 11 inches provide fixed reference dimensions, which support layout decisions that can be replicated across similar frameless wall cabinet runs.
This pull-down shelf is designed for frameless wall cabinets, so it fits projects using frameless upper cabinet construction.
The IMOVE 24 single tray is specified for a 24 inch cabinet opening, aligning it with a common wall cabinet width.
The shelf has an 18 lbs. load rating, which guides how much weight can be stored on the tray during normal use.
The shelf pulls down 13.375 inches, bringing stored items lower from the wall cabinet interior for easier reach.
The unit needs an internal minimum depth of 11 inches, defining the front-to-back space available for the tray and mechanism.
The system requires an internal minimum height of 19.5 inches, setting the vertical clearance the cabinet must provide.
The iMove 1-Tray pull-down shelf pairs a 24 inch cabinet opening fit with a pull-down shelf designed for frameless wall cabinets, so it addresses reach in upper storage while matching frameless construction. With 18 lbs. load rating, internal minimum depth of 11 inches, and internal minimum height of 19.5 inches, it slots into defined cabinet spaces without guesswork. The shelf pulls down 13.375 inches and uses soft-open/soft-close motion, which supports controlled access to wall cabinet contents. For projects that call for an anthracite/anthracite organizer in a frameless wall cabinet, this IMOVE 24 single tray offers a clearly specified option from Kessebohmer USA Inc.
Sold In: 1 Each