24V LED 3W Side-Emitting Neoloop For Runs

24V LED 3W Side-Emitting Neoloop describes a 24VDC LED flexible lighting strip from Tresco Lighting that delivers 3 watts per foot and 200 lumens per foot, so installers get consistent light output along long cabinet, display, or trim runs. The natural 3500K color temperature defines the light as a neutral tone between warm and cool, which helps keep finishes and materials looking accurate under task and accent lighting. A 145 degree beam spread directs a broad wash of light from the curved illuminated top, giving even coverage along the length of the strip. Flexible silicone construction allows the strip body to bend on the vertical axis, so it follows gentle contours while maintaining the side-emitting orientation. The 26.25 foot roll length creates extended uninterrupted runs, which reduces the number of electrical connections needed on a job.

Key Flexible Neoloop Details That Matter

• The flexible silicone construction forms a continuous housing, which supports smooth curves while helping protect the LEDs in normal indoor environments.
• Side-emitting, curved illuminated top output provides a 145 degree beam spread, which helps wash surfaces evenly along cabinet, shelf, or architectural lines.
• The 24VDC, 3 watts per foot rating defines the power load, which helps with sizing Tresco transformers and planning shared runs on a circuit.
• Output of 200 lumens per foot gives a predictable brightness level, which helps designers and installers match light levels across adjoining zones.
• The 26.25 foot roll length allows long continuous runs, which limits splices and helps maintain consistent appearance over extended installations.
• Cut points every 1-31/32 inches allow length adjustments in small increments, which supports precise fitting to cabinet, niche, or display dimensions.
• The IP65 rating indicates resistance to dust and low-pressure water jets, which supports use in areas where occasional moisture or cleaning spray is present.
• Linkable connectors and 79 inch starter cords molded on each end create simple terminations, which streamline layout and connection back to transformers.

Neoloop Mounting, Power, And Connection Use

This LED flexible lighting uses a 24VDC electrical requirement, which ties directly into layouts built around Tresco transformers for low-voltage cabinet and architectural lighting. The side-emitting, curved illuminated top orientation means the strip is positioned so light projects outward across surfaces, which is useful when mounting along edges or recesses that highlight vertical faces. Being bendable on the vertical axis allows the installer to route the silicone Neoloop around gentle inside or outside curves, which helps maintain a continuous light line on contoured millwork. Cuttable sections every 1-31/32 inches let the run stop exactly at a cabinet end or reveal, which reduces exposed dead zones or overhang. Linkable design with connectors keeps multiple roll segments electrically continuous, which helps when creating longer runs within the transformer and wattage plan.

Using This Tresco Neoloop In Real Projects

Where This 26.25 Foot Neoloop Works Best

This 26.25 foot roll of Tresco Lighting Neoloop suits installations where a single run of flexible LED lighting must cover extended linear distances, such as continuous cabinet toe kicks, upper cabinet bottoms, or display case perimeters. The natural 3500K color temperature works in spaces where wood tones, laminates, and painted finishes benefit from a neutral, balanced light that does not skew warm or cool, which helps maintain consistent appearance across connected rooms. Side-emitting, curved illuminated top output paired with a 145 degree beam spread sends light out across adjacent surfaces rather than straight up, which is valuable for washing backsplash areas, shelving faces, or feature walls. Because the construction is flexible silicone and bendable on the vertical axis, it adapts well to millwork with subtle curves, fascia transitions, or recessed channels, supporting continuous visual lines.

Details That Support Consistent Results And Planning

The defined 3 watts per foot rating gives a clear load figure for each section of Neoloop, which simplifies calculating total wattage for a run and matching it to appropriate Tresco transformers without guesswork. Output of 200 lumens per foot provides a predictable brightness level, which assists in designing layered lighting where this Neoloop works alongside other fixtures from the same space. Cuttable increments of 1-31/32 inches allow trimming close to exact dimensions, which reduces shadow gaps or light spill past cabinet or niche edges. The IP65 rating signals that the flexible silicone body protects the LEDs against dust and low-pressure water jets, which supports use in environments where occasional splashes or cleaning routines occur. Linkable capability with connectors along the strip and 79 inch starter cords molded on each end creates straightforward terminations back to power, which helps keep installation time predictable on multi-run projects.

Common Questions About This Tresco Neoloop

Select This Neoloop For Neutral Linear Lighting

The Tresco Lighting 24V LED 3W Side-Emitting Neoloop combines 24VDC power, 3 watts per foot load, and 200 lumens per foot output in a flexible silicone strip that supports long, continuous runs. The natural 3500K color and 145 degree beam spread give neutral, even illumination across cabinets, displays, and architectural details. With cut points every 1-31/32 inches, IP65 rating, and linkable layout using molded 79 inch starter cords, this 26.25 foot roll is suited to installers who need predictable, low-voltage linear lighting that follows project dimensions and environmental demands.