Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood cabinet is built for kitchen runs where solid construction and dependable alignment matter over time. The frames are built of solid 3/4" oak, maple or beech, so the face structure stays rigid under daily door and drawer use in a busy kitchen. Each rail is kiln-dried, which stabilizes the lumber and helps the frame stay true as it goes from shop to installation. The rails are joined by mortise and tenon, then glued for added strength, creating a tight, square front that resists racking when units are installed in a line. Solid wood corner blocks are glued and power nailed, tying the cabinet box together so the corners stay tight under load. Solid wood toe kicks, 3/4" thick, give a firm base at floor level, which supports the cabinet when installed in a continuous run.
This Kitchen Kompact cabinet uses solid wood hanging strips on wall and base cabinets, located at the top and bottom, so installers have defined fastening zones when setting the unit on a wall. These solid wood hanging strips give bite for fasteners and help spread loads into the cabinet box during mounting. Solid wood toe kicks at 3/4" thickness give a firm base for shimming and leveling along the floor line. Solid wood corner blocks that are glued and power nailed keep the cabinet box square while it is clamped, fastened, and adjusted against adjacent units.
The Warmwood WWWWN cabinet, part of the Kitchen Kompact line, fits kitchen layouts that call for a Warmwood finish and solid-frame construction. Frames of solid 3/4" oak, maple or beech support door and drawer hardware in day-to-day kitchen use, giving the front of a run a substantial structure. Solid wood toe kicks, 3/4" thick, suit installations where the front base may contact cleaning tools or light impacts near the floor. End panels built with 3-ply construction and a 1/2" thick engineered wood core with hardwood veneers present a stable side surface, which helps maintain consistent spacing between adjacent components in a run. Solid wood corner blocks that are glued and power nailed keep the cabinet box tight when the cabinet is integrated into a continuous row of Kitchen Kompact units.
This Kitchen Kompact cabinet uses rails that are kiln-dried, joined by mortise and tenon, and then glued, so installers are working with a front frame designed to stay square during handling and fastening. A stable frame helps doors sit evenly and reduces later adjustment time. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give repeatable fastening locations that accept fasteners reliably along the back. These hanging strips help transfer loads from the carcass into the wall structure when units are ganged. Solid wood corner blocks that are glued and power nailed keep the corners locked, which is important when clamps and screws are applied during alignment with neighboring cabinets. End panels with a 1/2" thick engineered wood core and hardwood veneers balance strength with a smooth outer face, supporting a clean finished side while maintaining thickness consistency during layout.
The Kitchen Kompact Warmwood cabinet uses solid 3/4" wood frames, kiln-dried mortise and tenon rails, solid wood corner blocks, solid wood toe kicks, and 3-ply end panels with an engineered wood core.
The Kitchen Kompact Warmwood cabinet has solid wood hanging strips at the top and bottom of wall and base cabinets, giving defined fastening zones for mounting to wall framing.
The Kitchen Kompact Warmwood cabinet uses 3/4" thick solid wood toe kicks to create a strong base at floor level, supporting cabinet weight in installed kitchen runs.
The Kitchen Kompact Warmwood cabinet frame rails are kiln-dried, then joined by mortise and tenon and glued, forming a stable front frame that stays square under use.
The Kitchen Kompact Warmwood cabinet end panels have 3-ply construction with a 1/2" thick engineered wood core and hardwood veneers, giving a stable core with a hardwood outer face.
The Kitchen Kompact Warmwood cabinet uses solid wood corner blocks that are glued and power nailed, tying the box together so the corners stay tight under load.
The Kitchen Kompact Warmwood cabinet combines solid 3/4" oak, maple or beech frames with kiln-dried mortise and tenon rails, giving a rigid face structure for kitchen projects. Solid wood hanging strips at the top and bottom of wall and base cabinets provide clear fastening points during layout. Solid wood toe kicks at 3/4" thickness support cabinet weight along the floor edge, and 3-ply end panels with an engineered wood core and hardwood veneers keep side dimensions stable. For runs built around Warmwood styling and solid-frame construction, the Kitchen Kompact Warmwood cabinet offers a defined structure ready for professional installation.
Sold In: 1 Each