
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
White Tunable FlexTape linking cord is a Rev-A-Shelf connector cable used to connect two White Tunable FlexTape lights together. This product is identified by manufacturer part number L-TPEPKT-2M-CCT-1 and is described as a 2M FlexTape CCT starter lead. For buyers working with white tunable flex tape lights, this lighting connector cable helps extend or bridge a run where two compatible tape light sections need to be joined. If you need a starter lead for FlexTape or need to connect two tape lights in a tunable white setup, this product is built for that specific task. Before ordering, confirm tape light compatibility, connector style, and the exact installation layout for your project.
Key specs to confirm: This Rev-A-Shelf linking cord is described as a 2M FlexTape CCT starter lead and a cable used to connect two White Tunable Flex Tape Lights together. Confirm that your lighting system is the White Tunable FlexTape CCT type, not a different tape light series or color temperature format. Buyers should also verify connector end style, mating compatibility with the existing tape lights, and whether the full 2M or 79 inch lead length fits the planned routing path. Electrical ratings, voltage, wattage limits, and compliance details are not provided here and should be confirmed with the manufacturer or technical documentation before installation.
What's included: Verified information confirms this item is a linking cord or starter lead for White Tunable FlexTape CCT applications. Additional included components are not specified and should be confirmed before ordering.
What to verify before ordering: Confirm the tape light series, CCT compatibility, connector style on both ends, required cable length, and whether your project needs a linking cord between two lights or a different accessory for power input or control.
When a lighting layout uses separate sections of white tunable tape lighting, the connection point matters. A buyer may need to bridge a gap inside cabinetry, connect lighting across a break in millwork, or join two compatible runs where a single continuous strip is not practical. In those cases, a tunable white tape light linking cord can be the needed accessory rather than another light strip.
This Rev-A-Shelf FlexTape CCT connector cable is intended for that specific use. The verified product description states that it is used to connect two White Tunable Flex Tape Lights together. That makes it relevant for installers, cabinet shops, and serious DIY buyers working on under-cabinet lighting, display lighting, or interior fixture lighting that uses white tunable flex tape lights. The 2M FlexTape CCT lead length gives a known reference point for planning spacing and routing, especially where the connection path cannot be made with a short jumper.
A common problem with tape light projects is ordering a cable that matches the general product category but not the exact tape light system. White tunable systems often use different connectors than other tape lights, so tape light compatibility should be checked carefully. Buyers should confirm that their existing lights are part of the White Tunable FlexTape CCT family and that this starter lead matches the connector type needed on both ends. If your application involves a power feed, controller connection, or dimming hardware, confirm whether this linking cord is the correct part for that role or whether another accessory is required.
Another practical issue is cable length. A 2M lead can help when lights are separated by a larger distance, but it is still important to verify the actual route the cable will take through the cabinet, panel, or fixture. Measure the path, not just the straight-line distance. Also confirm any electrical details that are not listed here. Voltage, amperage, and code-related requirements should be checked in the manufacturer documentation before installation. Follow local electrical codes and permitting requirements in your area.
Many tape light accessories look similar at a glance, but the right choice depends on product family, connection purpose, and installation layout. A generic lighting connector cable may not help if it does not match the tunable white tape light system already in place. This is why the product identity matters. Rev-A-Shelf identifies this item as a White Tunable FlexTape linking cord and as a FlexTape CCT starter lead, which gives buyers a clearer basis for matching the accessory to the intended tape light type.
Compared with choosing an unspecified connector, selecting a product with a verified use case helps reduce ordering mistakes. The web description clearly states that this cable is used to connect two White Tunable Flex Tape Lights together. That direct statement is useful for buyers who already know they need a linking part between two compatible light sections. It also helps distinguish this item from tape lights, controllers, or power leads that serve different roles in a lighting system.
The known 2M or 79 inch lead description also supports planning. Rather than guessing from a product photo, buyers can compare the stated lead length to the actual spacing in the installation. For professional installers, that can help with takeoffs and part selection. For replacement purchases, the manufacturer part number gives another reliable checkpoint. If a project requires exact electrical matching, connector orientation, or approval details, those items should be confirmed in technical documentation rather than assumed from the category name alone.
This Rev-A-Shelf White Tunable FlexTape linking cord is used to connect two White Tunable Flex Tape Lights together.
This product is a connector and connecting cable, not the tape light itself.
Tape light compatibility should be confirmed carefully because the verified description only identifies use with White Tunable FlexTape CCT lights.
This FlexTape CCT starter lead is described as 2M and also listed as 79 inches.
This linking cord is described for connecting two White Tunable Flex Tape Lights together, subject to matching connector style and system compatibility.
This starter lead for FlexTape should be matched by tape light series, CCT type, connector ends, and required cable length.
Electrical ratings are not provided here and should be confirmed with the manufacturer or technical documentation before installation.
Included accessories are not specified beyond the linking cord, so package contents should be confirmed before purchase.
This tunable white tape light linking cord can be useful wherever compatible White Tunable FlexTape sections need to be joined within a lighting layout.
This electrical lighting cable should be installed per manufacturer documentation. Follow local electrical codes and permitting requirements in your area.
Rev-A-Shelf FlexTape CCT starter lead is a product-specific cable for connecting two White Tunable Flex Tape Lights together. Before purchase, confirm that your lighting system is the White Tunable FlexTape CCT type, that the connector ends match your existing components, and that the 2M lead length fits the planned route. Also verify package contents and any electrical details not listed here so the linking cord fits your installation without delays.
This tunable white tape light lead is intended for buyers who need a verified connection cable for White Tunable FlexTape installations. It is best suited to projects where two compatible light sections must be joined with a defined 2M lead. Check the tape light family, connector style, and installation path before ordering so the cable matches the system and the spacing in your build.
Sold In: 1 Each