Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Docking Drawer Safety Interlock Outlet 15 Amp creates safe, non-energized enclosed spaces by keeping connected appliances de-energized when conditions activate its safety switch, which matters when cabinets hold heat-generating devices that should not run unattended behind closed doors. The switch automatically turns OFF power when depressed, so the circuit to the connected appliance is interrupted, helping installers design cabinets that control when power is available. As a 15 amp solution, it supports typical residential appliance loads while staying within common branch circuit ratings, which simplifies specifying this outlet into many cabinet layouts. Directly connecting one appliance with a single plug keeps wiring straightforward, so each appliance has a dedicated controlled outlet rather than shared connections that complicate troubleshooting. Black finish branding as Docking Drawer hardware also helps match design intent where a discreet, modern electrical component is preferred inside cabinet spaces.
This safety interlock outlet replaces a single-gang wall receptacle, so it fits into familiar rough-in dimensions where a standard single-gang box location exists, helping electricians and cabinet shops integrate it without rethinking entire wall layouts. The outlet side-mounts behind cabinet doors, letting the interlock function operate in relation to door position and cabinet geometry, which is useful when planning door swings and clearances around heat-generating appliances. Because Docking Drawer identifies this unit as a corner mount limit switch OFF version, it is oriented for mounting where a corner placement aligns the limit switch with the moving surface, letting the depressed position trigger power shutoff reliably. The 15 amp rating matches many small appliance circuits, providing a straightforward choice where a single controlled receptacle is needed for one load rather than a multi-device branch.
As part of Wurth Baer Supply's in-drawer outlets and drawer inserts category, this Docking Drawer safety interlock outlet integrates into kitchen and bath cabinet projects where controlled power inside enclosed spaces is required, especially around heat-generating appliances. Side-mounting behind cabinet doors positions the device so the mechanical action of the door or related hardware can depress the switch, matching cabinet motion with electrical shutoff in day-to-day operation. Its design to create safe, non-energized enclosed spaces suits cabinets that hold heated grooming tools, small cooking appliances, or similar devices, where designers want power removed when the space is closed. Replacing a single-gang wall receptacle allows it to sit within a standard wall opening while serving cabinet-mounted equipment, which helps coordinate wall rough-in with millwork layout and final assembly sequencing on site.
The enhanced safety function that automatically turns OFF power when the switch is depressed ties physical motion directly to power status, giving installers a repeatable behavior pattern to design around when aligning doors, stops, and limit points. Configuring the outlet to directly connect one appliance with a single plug keeps each circuit relationship clear, so tracing a problem or swapping an appliance in the future remains straightforward for service technicians and shop teams. ETL listing to NEC and CEC standards, with certifications for UL 498 and CSA 22.2 #42, offers documented conformity to widely recognized safety benchmarks, which supports consistent specification across multiple projects and reduces redesign when working under different electrical codes. Being approved for use in the US and Canada means the same part number 6015-2001B can be standardized across a broader territory, simplifying purchasing, inventory, and installation workflows. The corner mount limit switch OFF configuration also provides a defined actuation style, helping drafters and engineers repeat the same geometry across cabinet runs without constant re-engineering of the interlock interface.
The Docking Drawer Safety Interlock Outlet 15 Amp creates safe, non-energized enclosed spaces by controlling power to a connected appliance, helping keep heat-generating devices off inside closed cabinet areas.
The corner mount limit switch OFF version uses a switch that automatically turns OFF power when depressed, so physical contact at the limit position de-energizes the connected 15 amp appliance load.
This safety interlock outlet side-mounts behind cabinet doors and replaces a single-gang wall receptacle, positioning the switch so cabinet movement can control when the connected appliance is energized.
The safety interlock outlet directly connects one appliance with a single plug on a 15 amp circuit, supporting a single heat-generating device per controlled outlet inside the cabinet space.
The interlock outlet is ETL listed, complies with NEC and CEC standards, and is certified for UL 498 and CSA 22.2 #42, supporting use on projects that require recognized electrical certifications.
This Docking Drawer outlet is approved for use in the US and Canada, so shops and installers can standardize the same 6015-2001B part on projects in both countries.
Choosing the Docking Drawer Safety Interlock Outlet 15 Amp w/Corner Mount Limit Switch-Off Version, Black lets you pair a 15 amp, ETL listed, UL 498 and CSA 22.2 #42 certified device with cabinets that house heat-generating appliances. Its role replacing a single-gang wall receptacle and side-mounting behind cabinet doors supports clean layouts where cabinet motion governs when the single-plug appliance is energized. For shops building kitchen and bath drawer inserts or in-drawer outlet solutions, this Docking Drawer interlock design from Wurth Baer Supply aligns safety shutoff function, regional approvals, and straightforward configuration into one part number ready for repeated use.
Sold In: 1 Kit
